{"product_id":"fire-rated-ip65-downlight-trade-pack-with-adjustable-tilt-in-matt-white","title":"Fire Rated IP65 Downlight Trade Pack with Adjustable Tilt in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: 30 degrees of tilt while staying IP65, which almost nothing manages, using a gimbal behind the gasket rather than in front of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135150462,"sku":"BBM-FRP-017-P10","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135183230,"sku":"BBM-FRP-017-P20","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135215998,"sku":"BBM-FRP-017-P30","price":3349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_Adjustable_Tilt_in_Matt_White.jpg?v=1789239732","url":"https:\/\/batheandbeam.com\/products\/fire-rated-ip65-downlight-trade-pack-with-adjustable-tilt-in-matt-white","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}