{"title":"Under £50","description":"\u003cp\u003eLamps, drivers, dimmers, gaskets, connectors and single downlights. The sensible place to start if you are replacing one fitting or fixing one fault.\u003c\/p\u003e","products":[{"product_id":"ip65-fire-rated-downlight-in-matt-white","title":"IP65 Fire Rated Downlight in Matt White","description":"\u003cp\u003eA downlight for a bathroom: the one to buy if you are buying one thing: fire rated, IP65, integral driver, dimmable, and nothing clever.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 92 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.41 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149076862,"sku":"BBM-DWN-001-27","price":29.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149109630,"sku":"BBM-DWN-001-30","price":29.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149142398,"sku":"BBM-DWN-001-40","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_in_Matt_White.jpg?v=1789239801"},{"product_id":"ip65-fire-rated-downlight-in-brushed-chrome","title":"IP65 Fire Rated Downlight in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: the one to buy if you are buying one thing: fire rated, IP65, integral driver, dimmable, and nothing clever.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 92 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149175166,"sku":"BBM-DWN-002-27","price":32.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149207934,"sku":"BBM-DWN-002-30","price":32.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149240702,"sku":"BBM-DWN-002-40","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_in_Brushed_Chrome.jpg?v=1789239805"},{"product_id":"ip65-fire-rated-downlight-in-matt-black","title":"IP65 Fire Rated Downlight in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: the one to buy if you are buying one thing: fire rated, IP65, integral driver, dimmable, and nothing clever.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 92 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149273470,"sku":"BBM-DWN-003-27","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149306238,"sku":"BBM-DWN-003-30","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149339006,"sku":"BBM-DWN-003-40","price":33.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_in_Matt_Black.jpg?v=1789239804"},{"product_id":"ip65-fire-rated-downlight-with-selectable-colour-temperature-in-matt-white","title":"IP65 Fire Rated Downlight with Selectable Colour Temperature in Matt White","description":"\u003cp\u003eA downlight for a bathroom: a switch on the back for 2700K, 3000K or 4000K, decided on site rather than in a basket.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.43 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149470078,"sku":"BBM-DWN-005-27","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149502846,"sku":"BBM-DWN-005-30","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149535614,"sku":"BBM-DWN-005-40","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Selectable_Colour_Temperature_in_Matt_White.jpg?v=1789239811"},{"product_id":"ip65-fire-rated-downlight-with-selectable-colour-temperature-in-brushed-chrome","title":"IP65 Fire Rated Downlight with Selectable Colour Temperature in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: a switch on the back for 2700K, 3000K or 4000K, decided on site rather than in a basket.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.44 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149568382,"sku":"BBM-DWN-006-27","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149601150,"sku":"BBM-DWN-006-30","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149633918,"sku":"BBM-DWN-006-40","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Selectable_Colour_Temperature_in_Brushed_Chrome.jpg?v=1789239813"},{"product_id":"ip65-fire-rated-downlight-with-selectable-colour-temperature-in-matt-black","title":"IP65 Fire Rated Downlight with Selectable Colour Temperature in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: a switch on the back for 2700K, 3000K or 4000K, decided on site rather than in a basket.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.44 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149666686,"sku":"BBM-DWN-007-27","price":39.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149699454,"sku":"BBM-DWN-007-30","price":39.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149732222,"sku":"BBM-DWN-007-40","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Selectable_Colour_Temperature_in_Matt_Black.jpg?v=1789239811"},{"product_id":"ip65-fire-rated-downlight-with-selectable-colour-temperature-in-polished-chrome","title":"IP65 Fire Rated Downlight with Selectable Colour Temperature in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: a switch on the back for 2700K, 3000K or 4000K, decided on site rather than in a basket.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.44 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149764990,"sku":"BBM-DWN-008-27","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149797758,"sku":"BBM-DWN-008-30","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149830526,"sku":"BBM-DWN-008-40","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Selectable_Colour_Temperature_in_Polished_Chrome.jpg?v=1789239812"},{"product_id":"ip65-fire-rated-downlight-with-dim-to-warm-in-matt-white","title":"IP65 Fire Rated Downlight with Dim to Warm in Matt White","description":"\u003cp\u003eA downlight for a bathroom: falls from 2700K to 1800K as it dims, which is what a halogen did and what people actually mean when they say they miss halogen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 86 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.43 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149863294,"sku":"BBM-DWN-009-27","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023149896062,"sku":"BBM-DWN-009-30","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023149928830,"sku":"BBM-DWN-009-40","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Dim_to_Warm_in_Matt_White.jpg?v=1789239811"},{"product_id":"ip65-fire-rated-downlight-with-dim-to-warm-in-brushed-chrome","title":"IP65 Fire Rated Downlight with Dim to Warm in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: falls from 2700K to 1800K as it dims, which is what a halogen did and what people actually mean when they say they miss halogen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 86 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.44 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023149994366,"sku":"BBM-DWN-010-27","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150027134,"sku":"BBM-DWN-010-30","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150059902,"sku":"BBM-DWN-010-40","price":46.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Dim_to_Warm_in_Brushed_Chrome.jpg?v=1789239811"},{"product_id":"ip65-fire-rated-downlight-with-dim-to-warm-in-matt-black","title":"IP65 Fire Rated Downlight with Dim to Warm in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: falls from 2700K to 1800K as it dims, which is what a halogen did and what people actually mean when they say they miss halogen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 86 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.44 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150125438,"sku":"BBM-DWN-011-27","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150158206,"sku":"BBM-DWN-011-30","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150190974,"sku":"BBM-DWN-011-40","price":48.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Dim_to_Warm_in_Matt_Black.jpg?v=1789239812"},{"product_id":"ip65-fire-rated-downlight-with-dim-to-warm-in-polished-chrome","title":"IP65 Fire Rated Downlight with Dim to Warm in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: falls from 2700K to 1800K as it dims, which is what a halogen did and what people actually mean when they say they miss halogen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 86 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.44 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150223742,"sku":"BBM-DWN-012-27","price":45.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150256510,"sku":"BBM-DWN-012-30","price":45.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150289278,"sku":"BBM-DWN-012-40","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_Dim_to_Warm_in_Polished_Chrome.jpg?v=1789239813"},{"product_id":"ip65-fire-rated-downlight-with-cri-97-in-matt-white","title":"IP65 Fire Rated Downlight with CRI 97 in Matt White","description":"\u003cp\u003eA downlight for a bathroom: CRI 97 with R9 above 90, which is a photographic specification and the difference between skin looking like skin and skin looking grey.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 610 lumens at 84 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.41 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150322046,"sku":"BBM-DWN-013-27","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150354814,"sku":"BBM-DWN-013-30","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150387582,"sku":"BBM-DWN-013-40","price":48.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_CRI_97_in_Matt_White.jpg?v=1789239812"},{"product_id":"ip65-fire-rated-downlight-with-cri-97-in-polished-chrome","title":"IP65 Fire Rated Downlight with CRI 97 in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: CRI 97 with R9 above 90, which is a photographic specification and the difference between skin looking like skin and skin looking grey.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 610 lumens at 84 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150616958,"sku":"BBM-DWN-016-27","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150649726,"sku":"BBM-DWN-016-30","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150682494,"sku":"BBM-DWN-016-40","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_CRI_97_in_Polished_Chrome.jpg?v=1789239813"},{"product_id":"ip65-fire-rated-airtight-downlight-in-matt-white","title":"IP65 Fire Rated Airtight Downlight in Matt White","description":"\u003cp\u003eA downlight for a bathroom: airtight to under 0.5 cubic metres an hour, for a house that has to pass an airtightness test or a ceiling you would rather not turn into a chimney.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.51 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150715262,"sku":"BBM-DWN-017-27","price":40.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150748030,"sku":"BBM-DWN-017-30","price":40.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150780798,"sku":"BBM-DWN-017-40","price":40.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Airtight_Downlight_in_Matt_White.jpg?v=1789239804"},{"product_id":"ip65-fire-rated-airtight-downlight-in-brushed-chrome","title":"IP65 Fire Rated Airtight Downlight in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: airtight to under 0.5 cubic metres an hour, for a house that has to pass an airtightness test or a ceiling you would rather not turn into a chimney.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.52 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150813566,"sku":"BBM-DWN-018-27","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150846334,"sku":"BBM-DWN-018-30","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150879102,"sku":"BBM-DWN-018-40","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Airtight_Downlight_in_Brushed_Chrome.jpg?v=1789239807"},{"product_id":"ip65-fire-rated-airtight-downlight-in-matt-black","title":"IP65 Fire Rated Airtight Downlight in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: airtight to under 0.5 cubic metres an hour, for a house that has to pass an airtightness test or a ceiling you would rather not turn into a chimney.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.52 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023150911870,"sku":"BBM-DWN-019-27","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023150944638,"sku":"BBM-DWN-019-30","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023150977406,"sku":"BBM-DWN-019-40","price":46.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Airtight_Downlight_in_Matt_Black.jpg?v=1789239804"},{"product_id":"ip65-fire-rated-airtight-downlight-in-polished-chrome","title":"IP65 Fire Rated Airtight Downlight in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: airtight to under 0.5 cubic metres an hour, for a house that has to pass an airtightness test or a ceiling you would rather not turn into a chimney.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.52 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023151010174,"sku":"BBM-DWN-020-27","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023151042942,"sku":"BBM-DWN-020-30","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023151075710,"sku":"BBM-DWN-020-40","price":43.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Airtight_Downlight_in_Polished_Chrome.jpg?v=1789239807"},{"product_id":"ip65-fire-rated-tilting-downlight-in-matt-white","title":"IP65 Fire Rated Tilting Downlight in Matt White","description":"\u003cp\u003eA downlight for a bathroom: 30 degrees of tilt while staying IP65, with the gimbal behind the gasket rather than in front of it, which is why almost nobody makes one.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 86 lumens per circuit watt, 40 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.49 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 40 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023151501694,"sku":"BBM-DWN-025-27","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023151534462,"sku":"BBM-DWN-025-30","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023151567230,"sku":"BBM-DWN-025-40","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Tilting_Downlight_in_Matt_White.jpg?v=1789239812"},{"product_id":"ip65-fire-rated-downlight-with-a-narrow-beam-in-matt-white","title":"IP65 Fire Rated Downlight with a Narrow Beam in Matt White","description":"\u003cp\u003eA downlight for a bathroom: a 24 degree beam for a three metre ceiling, which lands as light rather than as pools.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 640 lumens at 90 lumens per circuit watt, 24 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.41 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 24 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023151894910,"sku":"BBM-DWN-029-27","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023151927678,"sku":"BBM-DWN-029-30","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023151960446,"sku":"BBM-DWN-029-40","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Narrow_Beam_in_Matt_White.jpg?v=1789239807"},{"product_id":"ip65-fire-rated-downlight-with-a-narrow-beam-in-brushed-chrome","title":"IP65 Fire Rated Downlight with a Narrow Beam in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: a 24 degree beam for a three metre ceiling, which lands as light rather than as pools.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 640 lumens at 90 lumens per circuit watt, 24 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 24 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023151993214,"sku":"BBM-DWN-030-27","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152025982,"sku":"BBM-DWN-030-30","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152058750,"sku":"BBM-DWN-030-40","price":48.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Narrow_Beam_in_Brushed_Chrome.jpg?v=1789239812"},{"product_id":"ip65-fire-rated-downlight-with-a-narrow-beam-in-matt-black","title":"IP65 Fire Rated Downlight with a Narrow Beam in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: a 24 degree beam for a three metre ceiling, which lands as light rather than as pools.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 640 lumens at 90 lumens per circuit watt, 24 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 24 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152091518,"sku":"BBM-DWN-031-27","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152124286,"sku":"BBM-DWN-031-30","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152157054,"sku":"BBM-DWN-031-40","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Narrow_Beam_in_Matt_Black.jpg?v=1789239807"},{"product_id":"ip65-fire-rated-downlight-with-a-narrow-beam-in-polished-chrome","title":"IP65 Fire Rated Downlight with a Narrow Beam in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: a 24 degree beam for a three metre ceiling, which lands as light rather than as pools.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 640 lumens at 90 lumens per circuit watt, 24 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 24 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152189822,"sku":"BBM-DWN-032-27","price":47.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152222590,"sku":"BBM-DWN-032-30","price":47.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152255358,"sku":"BBM-DWN-032-40","price":47.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Narrow_Beam_in_Polished_Chrome.jpg?v=1789239807"},{"product_id":"ip65-fire-rated-downlight-with-a-wide-beam-in-matt-white","title":"IP65 Fire Rated Downlight with a Wide Beam in Matt White","description":"\u003cp\u003eA downlight for a bathroom: a 90 degree beam for a low ceiling, where a narrow beam makes a small bathroom look like a car park at night.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 660 lumens at 92 lumens per circuit watt, 90 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.41 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 90 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152288126,"sku":"BBM-DWN-033-27","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152320894,"sku":"BBM-DWN-033-30","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152353662,"sku":"BBM-DWN-033-40","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Wide_Beam_in_Matt_White.jpg?v=1789239807"},{"product_id":"ip65-fire-rated-downlight-with-a-wide-beam-in-brushed-chrome","title":"IP65 Fire Rated Downlight with a Wide Beam in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: a 90 degree beam for a low ceiling, where a narrow beam makes a small bathroom look like a car park at night.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 660 lumens at 92 lumens per circuit watt, 90 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 90 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152419198,"sku":"BBM-DWN-034-27","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152451966,"sku":"BBM-DWN-034-30","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152484734,"sku":"BBM-DWN-034-40","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Wide_Beam_in_Brushed_Chrome.jpg?v=1789239812"},{"product_id":"ip65-fire-rated-downlight-with-a-wide-beam-in-matt-black","title":"IP65 Fire Rated Downlight with a Wide Beam in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: a 90 degree beam for a low ceiling, where a narrow beam makes a small bathroom look like a car park at night.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 660 lumens at 92 lumens per circuit watt, 90 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 90 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152517502,"sku":"BBM-DWN-035-27","price":39.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152550270,"sku":"BBM-DWN-035-30","price":39.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152583038,"sku":"BBM-DWN-035-40","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Wide_Beam_in_Matt_Black.jpg?v=1789239804"},{"product_id":"ip65-fire-rated-downlight-with-a-wide-beam-in-polished-chrome","title":"IP65 Fire Rated Downlight with a Wide Beam in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: a 90 degree beam for a low ceiling, where a narrow beam makes a small bathroom look like a car park at night.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 660 lumens at 92 lumens per circuit watt, 90 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.42 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 90 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152615806,"sku":"BBM-DWN-036-27","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152648574,"sku":"BBM-DWN-036-30","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152681342,"sku":"BBM-DWN-036-40","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_a_Wide_Beam_in_Polished_Chrome.jpg?v=1789239807"},{"product_id":"slim-ip65-downlight-at-25mm-deep-in-matt-white","title":"Slim IP65 Downlight at 25mm Deep in Matt White","description":"\u003cp\u003eA downlight for a bathroom: 25mm above the ceiling with a remote driver, for a concrete soffit or a void that does not exist.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 40mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 580 lumens at 84 lumens per circuit watt, 110 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.29 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 40mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 110 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152714110,"sku":"BBM-DWN-037-27","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152746878,"sku":"BBM-DWN-037-30","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152779646,"sku":"BBM-DWN-037-40","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_IP65_Downlight_at_25mm_Deep_in_Matt_White.jpg?v=1789239869"},{"product_id":"slim-ip65-downlight-at-25mm-deep-in-brushed-chrome","title":"Slim IP65 Downlight at 25mm Deep in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: 25mm above the ceiling with a remote driver, for a concrete soffit or a void that does not exist.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 40mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 580 lumens at 84 lumens per circuit watt, 110 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 40mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 110 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152812414,"sku":"BBM-DWN-038-27","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152845182,"sku":"BBM-DWN-038-30","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152877950,"sku":"BBM-DWN-038-40","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_IP65_Downlight_at_25mm_Deep_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"slim-ip65-downlight-at-25mm-deep-in-matt-black","title":"Slim IP65 Downlight at 25mm Deep in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: 25mm above the ceiling with a remote driver, for a concrete soffit or a void that does not exist.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 40mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 580 lumens at 84 lumens per circuit watt, 110 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 40mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 110 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152910718,"sku":"BBM-DWN-039-27","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152943486,"sku":"BBM-DWN-039-30","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152976254,"sku":"BBM-DWN-039-40","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_IP65_Downlight_at_25mm_Deep_in_Matt_Black.jpg?v=1789239871"},{"product_id":"slim-ip65-downlight-at-25mm-deep-in-polished-chrome","title":"Slim IP65 Downlight at 25mm Deep in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: 25mm above the ceiling with a remote driver, for a concrete soffit or a void that does not exist.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 40mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 580 lumens at 84 lumens per circuit watt, 110 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 40mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 110 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023153041790,"sku":"BBM-DWN-040-27","price":41.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023153074558,"sku":"BBM-DWN-040-30","price":41.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023153107326,"sku":"BBM-DWN-040-40","price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_IP65_Downlight_at_25mm_Deep_in_Polished_Chrome.jpg?v=1789239873"},{"product_id":"ip65-downlight-with-a-remote-driver-in-matt-white","title":"IP65 Downlight with a Remote Driver in Matt White","description":"\u003cp\u003eA downlight for a bathroom: a remote driver on a 2 metre lead, which has to be accessible, and we would rather you planned for that than discovered it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.45 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023153140094,"sku":"BBM-DWN-041-27","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023153172862,"sku":"BBM-DWN-041-30","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023153205630,"sku":"BBM-DWN-041-40","price":33.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Downlight_with_a_Remote_Driver_in_Matt_White.jpg?v=1789239807"},{"product_id":"ip65-downlight-with-a-remote-driver-in-brushed-chrome","title":"IP65 Downlight with a Remote Driver in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: a remote driver on a 2 metre lead, which has to be accessible, and we would rather you planned for that than discovered it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.46 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023153238398,"sku":"BBM-DWN-042-27","price":36.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023153271166,"sku":"BBM-DWN-042-30","price":36.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023153303934,"sku":"BBM-DWN-042-40","price":36.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Downlight_with_a_Remote_Driver_in_Brushed_Chrome.jpg?v=1789239807"},{"product_id":"ip65-downlight-with-a-remote-driver-in-matt-black","title":"IP65 Downlight with a Remote Driver in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: a remote driver on a 2 metre lead, which has to be accessible, and we would rather you planned for that than discovered it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.46 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023153336702,"sku":"BBM-DWN-043-27","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023153369470,"sku":"BBM-DWN-043-30","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023153402238,"sku":"BBM-DWN-043-40","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Downlight_with_a_Remote_Driver_in_Matt_Black.jpg?v=1789239804"},{"product_id":"ip65-downlight-with-a-remote-driver-in-polished-chrome","title":"IP65 Downlight with a Remote Driver in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: a remote driver on a 2 metre lead, which has to be accessible, and we would rather you planned for that than discovered it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens at 90 lumens per circuit watt, 60 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.46 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023153435006,"sku":"BBM-DWN-044-27","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023153467774,"sku":"BBM-DWN-044-30","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023153500542,"sku":"BBM-DWN-044-40","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Downlight_with_a_Remote_Driver_in_Polished_Chrome.jpg?v=1789239809"},{"product_id":"ip65-fire-rated-downlight-with-an-anti-glare-baffle-in-matt-white","title":"IP65 Fire Rated Downlight with an Anti Glare Baffle in Matt White","description":"\u003cp\u003eA downlight for a bathroom: a deep black baffle that puts the source out of sight from a normal standing position, which is what stops a bathroom ceiling looking like an interrogation.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 600 lumens at 84 lumens per circuit watt, 45 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.45 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 45 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023154581886,"sku":"BBM-DWN-053-27","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023154614654,"sku":"BBM-DWN-053-30","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023154647422,"sku":"BBM-DWN-053-40","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_an_Anti_Glare_Baffle_in_Matt_White.jpg?v=1789239805"},{"product_id":"ip65-fire-rated-downlight-with-an-anti-glare-baffle-in-brushed-chrome","title":"IP65 Fire Rated Downlight with an Anti Glare Baffle in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: a deep black baffle that puts the source out of sight from a normal standing position, which is what stops a bathroom ceiling looking like an interrogation.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 600 lumens at 84 lumens per circuit watt, 45 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.46 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 45 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023154680190,"sku":"BBM-DWN-054-27","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023154712958,"sku":"BBM-DWN-054-30","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023154745726,"sku":"BBM-DWN-054-40","price":46.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_an_Anti_Glare_Baffle_in_Brushed_Chrome.jpg?v=1789239810"},{"product_id":"ip65-fire-rated-downlight-with-an-anti-glare-baffle-in-matt-black","title":"IP65 Fire Rated Downlight with an Anti Glare Baffle in Matt Black","description":"\u003cp\u003eA downlight for a bathroom: a deep black baffle that puts the source out of sight from a normal standing position, which is what stops a bathroom ceiling looking like an interrogation.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 600 lumens at 84 lumens per circuit watt, 45 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.46 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 45 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023154778494,"sku":"BBM-DWN-055-27","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023154811262,"sku":"BBM-DWN-055-30","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023154844030,"sku":"BBM-DWN-055-40","price":48.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_an_Anti_Glare_Baffle_in_Matt_Black.jpg?v=1789239808"},{"product_id":"ip65-fire-rated-downlight-with-an-anti-glare-baffle-in-polished-chrome","title":"IP65 Fire Rated Downlight with an Anti Glare Baffle in Polished Chrome","description":"\u003cp\u003eA downlight for a bathroom: a deep black baffle that puts the source out of sight from a normal standing position, which is what stops a bathroom ceiling looking like an interrogation.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 600 lumens at 84 lumens per circuit watt, 45 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.46 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly, no hood needed\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 45 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023154876798,"sku":"BBM-DWN-056-27","price":45.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023154909566,"sku":"BBM-DWN-056-30","price":45.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023154942334,"sku":"BBM-DWN-056-40","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Fire_Rated_Downlight_with_an_Anti_Glare_Baffle_in_Polished_Chrome.jpg?v=1789239810"},{"product_id":"dual-voltage-shaver-socket-in-polished-chrome","title":"Dual Voltage Shaver Socket in Polished Chrome","description":"\u003cp\u003eA shaver socket: 115 and 230 volts through an isolating transformer to BS EN 61558-2-5, which is the standard that makes a socket lawful in a bathroom at all.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 146 by 86mm plate, 32mm projection, on a 35mm back box\u003c\/li\u003e\n\u003cli\u003eLight output: no light on this model\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light where one is fitted\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable\u003c\/li\u003e\n\u003cli\u003eElectrical: isolating transformer to BS EN 61558-2-5, 20VA, dual voltage 115 and 230 volts, with overload protection. This is what makes a socket lawful in a bathroom, and an ordinary socket never is\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003ePosition: a shaver socket may go in zone 2, which is the 600mm band beyond zone 1 and around a basin tap, provided it is not in direct spray. It may not go in zone 1 or zone 0 at all\u003c\/li\u003e\n\u003cli\u003eRating: 20VA, which runs a shaver or an electric toothbrush and will not run a hairdryer. It is not a general purpose socket and it is not meant to be\u003c\/li\u003e\n\u003cli\u003eUSB: not fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe socket and plate\u003c\/li\u003e\n\u003cli\u003ea 35mm back box\u003c\/li\u003e\n\u003cli\u003efixing screws\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. It needs a 35mm back box, which usually means chasing a tiled wall, so this is a decision made during a bathroom refit rather than afterwards.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA shaver socket is not a small 13 amp socket. It is an isolating transformer in a plate, which means the output is electrically separated from the mains supply and a fault cannot put you in a circuit with earth. That is the whole reason it is the one socket permitted in a bathroom, and it is also why it is rated at 20VA and will refuse to run a hairdryer. If somebody has fitted an ordinary socket in your bathroom, that is a fault to report rather than a convenience to keep.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023164739966,"sku":"BBM-SHV-001-X1","price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dual_Voltage_Shaver_Socket_in_Polished_Chrome.jpg?v=1789239633"},{"product_id":"dual-voltage-shaver-socket-in-brushed-chrome","title":"Dual Voltage Shaver Socket in Brushed Chrome","description":"\u003cp\u003eA shaver socket: 115 and 230 volts through an isolating transformer to BS EN 61558-2-5, which is the standard that makes a socket lawful in a bathroom at all.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 146 by 86mm plate, 32mm projection, on a 35mm back box\u003c\/li\u003e\n\u003cli\u003eLight output: no light on this model\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light where one is fitted\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable\u003c\/li\u003e\n\u003cli\u003eElectrical: isolating transformer to BS EN 61558-2-5, 20VA, dual voltage 115 and 230 volts, with overload protection. This is what makes a socket lawful in a bathroom, and an ordinary socket never is\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003ePosition: a shaver socket may go in zone 2, which is the 600mm band beyond zone 1 and around a basin tap, provided it is not in direct spray. It may not go in zone 1 or zone 0 at all\u003c\/li\u003e\n\u003cli\u003eRating: 20VA, which runs a shaver or an electric toothbrush and will not run a hairdryer. It is not a general purpose socket and it is not meant to be\u003c\/li\u003e\n\u003cli\u003eUSB: not fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe socket and plate\u003c\/li\u003e\n\u003cli\u003ea 35mm back box\u003c\/li\u003e\n\u003cli\u003efixing screws\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. It needs a 35mm back box, which usually means chasing a tiled wall, so this is a decision made during a bathroom refit rather than afterwards.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA shaver socket is not a small 13 amp socket. It is an isolating transformer in a plate, which means the output is electrically separated from the mains supply and a fault cannot put you in a circuit with earth. That is the whole reason it is the one socket permitted in a bathroom, and it is also why it is rated at 20VA and will refuse to run a hairdryer. If somebody has fitted an ordinary socket in your bathroom, that is a fault to report rather than a convenience to keep.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023164772734,"sku":"BBM-SHV-002-X1","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dual_Voltage_Shaver_Socket_in_Brushed_Chrome.jpg?v=1789239633"},{"product_id":"dual-voltage-shaver-socket-in-matt-black","title":"Dual Voltage Shaver Socket in Matt Black","description":"\u003cp\u003eA shaver socket: 115 and 230 volts through an isolating transformer to BS EN 61558-2-5, which is the standard that makes a socket lawful in a bathroom at all.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 146 by 86mm plate, 32mm projection, on a 35mm back box\u003c\/li\u003e\n\u003cli\u003eLight output: no light on this model\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light where one is fitted\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable\u003c\/li\u003e\n\u003cli\u003eElectrical: isolating transformer to BS EN 61558-2-5, 20VA, dual voltage 115 and 230 volts, with overload protection. This is what makes a socket lawful in a bathroom, and an ordinary socket never is\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003ePosition: a shaver socket may go in zone 2, which is the 600mm band beyond zone 1 and around a basin tap, provided it is not in direct spray. It may not go in zone 1 or zone 0 at all\u003c\/li\u003e\n\u003cli\u003eRating: 20VA, which runs a shaver or an electric toothbrush and will not run a hairdryer. It is not a general purpose socket and it is not meant to be\u003c\/li\u003e\n\u003cli\u003eUSB: not fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe socket and plate\u003c\/li\u003e\n\u003cli\u003ea 35mm back box\u003c\/li\u003e\n\u003cli\u003efixing screws\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. It needs a 35mm back box, which usually means chasing a tiled wall, so this is a decision made during a bathroom refit rather than afterwards.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA shaver socket is not a small 13 amp socket. It is an isolating transformer in a plate, which means the output is electrically separated from the mains supply and a fault cannot put you in a circuit with earth. That is the whole reason it is the one socket permitted in a bathroom, and it is also why it is rated at 20VA and will refuse to run a hairdryer. If somebody has fitted an ordinary socket in your bathroom, that is a fault to report rather than a convenience to keep.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023164805502,"sku":"BBM-SHV-003-X1","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dual_Voltage_Shaver_Socket_in_Matt_Black.jpg?v=1789239633"},{"product_id":"trailing-edge-dimmer-for-led-lighting","title":"Trailing Edge Dimmer for LED Lighting","description":"\u003cp\u003eThe part that decides whether the light behaves: a dimmer with a 5 to 250W range and an adjustable minimum, which is the setting that stops LEDs flickering at the bottom of the dial.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, 5 to 250W, with an adjustable minimum\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170212222,"sku":"BBM-DRV-001-X1","price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Trailing_Edge_Dimmer_for_LED_Lighting.jpg?v=1789239875"},{"product_id":"rotary-dimmer-with-an-adjustable-minimum","title":"Rotary Dimmer with an Adjustable Minimum","description":"\u003cp\u003eThe part that decides whether the light behaves: a screwdriver trim for the minimum, which is how you tune out the drop out point of whatever drivers you actually have.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, 5 to 250W, with an adjustable minimum\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170277758,"sku":"BBM-DRV-003-X1","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Rotary_Dimmer_with_an_Adjustable_Minimum.jpg?v=1789239866"},{"product_id":"constant-current-led-driver-at-350ma","title":"Constant Current LED Driver at 350mA","description":"\u003cp\u003eThe part that decides whether the light behaves: a replacement driver, because a driver is the part that fails and a fitting is not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.25 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170343294,"sku":"BBM-DRV-005-X1","price":31.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Constant_Current_LED_Driver_at_350mA.jpg?v=1789239654"},{"product_id":"constant-voltage-led-driver-at-24v-and-60w","title":"Constant Voltage LED Driver at 24V and 60W","description":"\u003cp\u003eThe part that decides whether the light behaves: for a tape run, sized with 20 per cent headroom, which is the rule that decides whether a driver lasts three years or ten.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.40 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170376062,"sku":"BBM-DRV-006-X1","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Constant_Voltage_LED_Driver_at_24V_and_60W.jpg?v=1789239653"},{"product_id":"pull-cord-switch-in-a-ceiling-rose","title":"Pull Cord Switch in a Ceiling Rose","description":"\u003cp\u003eThe part that decides whether the light behaves: a 6 amp cord switch, which is the switch a bathroom may have inside it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.20 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170539902,"sku":"BBM-DRV-011-X1","price":27.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pull_Cord_Switch_in_a_Ceiling_Rose.jpg?v=1789239862"},{"product_id":"dimmable-gu10-led-lamp-in-cri-97-at-2700k","title":"Dimmable GU10 LED Lamp in CRI 97 at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: the lamp to put in an existing bathroom downlight, because a CRI 97 lamp in an old fitting beats a CRI 80 fitting bought new.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.06 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170605438,"sku":"BBM-BLB-001-X1","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_in_CRI_97_at_2700K.jpg?v=1789239635"},{"product_id":"dimmable-gu10-led-lamp-in-cri-97-at-4000k","title":"Dimmable GU10 LED Lamp in CRI 97 at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: the lamp to put in an existing bathroom downlight, because a CRI 97 lamp in an old fitting beats a CRI 80 fitting bought new.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.06 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170638206,"sku":"BBM-BLB-002-X1","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_in_CRI_97_at_4000K.jpg?v=1789239644"},{"product_id":"dimmable-e14-candle-lamp-for-a-bathroom-pendant-at-2700k","title":"Dimmable E14 Candle Lamp for a Bathroom Pendant at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: a dimmable candle lamp, which most decorative LED candles are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E14 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.04 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170736510,"sku":"BBM-BLB-005-X1","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E14_Candle_Lamp_for_a_Bathroom_Pendant_at_2700K.jpg?v=1789239650"},{"product_id":"dimmable-e14-candle-lamp-for-a-bathroom-pendant-at-4000k","title":"Dimmable E14 Candle Lamp for a Bathroom Pendant at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: a dimmable candle lamp, which most decorative LED candles are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E14 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.04 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170769278,"sku":"BBM-BLB-006-X1","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E14_Candle_Lamp_for_a_Bathroom_Pendant_at_4000K.jpg?v=1789239646"}],"url":"https:\/\/batheandbeam.com\/collections\/under-50-pounds.oembed?page=3","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}