{"title":"Trade","description":"\u003cp\u003eSpecified for people who fit bathrooms for a living: batch-matched LEDs, named drivers with datasheets, ten-year parts availability and call-off delivery. Account terms on the \u003ca href=\"\/pages\/trade\"\u003etrade page\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"hotel-bathroom-lighting-package-for-ten-rooms-in-matt-white","title":"Hotel Bathroom Lighting Package for Ten Rooms in Matt White","description":"\u003cp\u003eA contract package: ten identical en suite packages with matched batch LEDs, so room 12 and room 34 are the same colour, which guests do not consciously notice and photographers do.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 82.9 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131087230,"sku":"BBM-COM-001-SO","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131119998,"sku":"BBM-COM-001-SI","price":2874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Lighting_Package_for_Ten_Rooms_in_Matt_White.jpg?v=1789239744"},{"product_id":"hotel-bathroom-lighting-package-for-ten-rooms-in-brushed-chrome","title":"Hotel Bathroom Lighting Package for Ten Rooms in Brushed Chrome","description":"\u003cp\u003eA contract package: ten identical en suite packages with matched batch LEDs, so room 12 and room 34 are the same colour, which guests do not consciously notice and photographers do.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 84.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131185534,"sku":"BBM-COM-002-SO","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131218302,"sku":"BBM-COM-002-SI","price":3149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Lighting_Package_for_Ten_Rooms_in_Brushed_Chrome.jpg?v=1789239744"},{"product_id":"hotel-bathroom-lighting-package-for-ten-rooms-in-matt-black","title":"Hotel Bathroom Lighting Package for Ten Rooms in Matt Black","description":"\u003cp\u003eA contract package: ten identical en suite packages with matched batch LEDs, so room 12 and room 34 are the same colour, which guests do not consciously notice and photographers do.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 84.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131283838,"sku":"BBM-COM-003-SO","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131316606,"sku":"BBM-COM-003-SI","price":3249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Lighting_Package_for_Ten_Rooms_in_Matt_Black.jpg?v=1789239745"},{"product_id":"hotel-bathroom-package-with-emergency-lighting-in-matt-white","title":"Hotel Bathroom Package with Emergency Lighting in Matt White","description":"\u003cp\u003eA contract package: the same package with a three hour maintained emergency luminaire per room and a test schedule, which is what a fire risk assessment will ask for.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 90.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131382142,"sku":"BBM-COM-004-SO","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131414910,"sku":"BBM-COM-004-SI","price":3249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Package_with_Emergency_Lighting_in_Matt_White.jpg?v=1789239747"},{"product_id":"hotel-bathroom-package-with-emergency-lighting-in-matt-black","title":"Hotel Bathroom Package with Emergency Lighting in Matt Black","description":"\u003cp\u003eA contract package: the same package with a three hour maintained emergency luminaire per room and a test schedule, which is what a fire risk assessment will ask for.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 92.4 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131578750,"sku":"BBM-COM-006-SO","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131611518,"sku":"BBM-COM-006-SI","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Package_with_Emergency_Lighting_in_Matt_Black.jpg?v=1789239736"},{"product_id":"commercial-washroom-lighting-package-in-matt-white","title":"Commercial Washroom Lighting Package in Matt White","description":"\u003cp\u003eA contract package: IP65 throughout, vandal resistant lenses and a DALI backbone, for a washroom that gets a hundred people a day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 76.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131677054,"sku":"BBM-COM-007-SO","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131709822,"sku":"BBM-COM-007-SI","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Commercial_Washroom_Lighting_Package_in_Matt_White.jpg?v=1789239637"},{"product_id":"commercial-washroom-lighting-package-in-brushed-chrome","title":"Commercial Washroom Lighting Package in Brushed Chrome","description":"\u003cp\u003eA contract package: IP65 throughout, vandal resistant lenses and a DALI backbone, for a washroom that gets a hundred people a day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 78.2 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131775358,"sku":"BBM-COM-008-SO","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131808126,"sku":"BBM-COM-008-SI","price":2899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Commercial_Washroom_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239649"},{"product_id":"commercial-washroom-lighting-package-in-matt-black","title":"Commercial Washroom Lighting Package in Matt Black","description":"\u003cp\u003eA contract package: IP65 throughout, vandal resistant lenses and a DALI backbone, for a washroom that gets a hundred people a day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 78.2 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131873662,"sku":"BBM-COM-009-SO","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131906430,"sku":"BBM-COM-009-SI","price":2974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Commercial_Washroom_Lighting_Package_in_Matt_Black.jpg?v=1789239653"},{"product_id":"care-home-bathroom-lighting-package-in-brushed-chrome","title":"Care Home Bathroom Lighting Package in Brushed Chrome","description":"\u003cp\u003eA contract package: high CRI at 500 lux for staff carrying out personal care, a night circuit at 5 lux, and no glare from a lying position, which is the specification most care home bathrooms miss.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 82.8 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132070270,"sku":"BBM-COM-011-SO","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132103038,"sku":"BBM-COM-011-SI","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Care_Home_Bathroom_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239641"},{"product_id":"care-home-bathroom-lighting-package-in-matt-black","title":"Care Home Bathroom Lighting Package in Matt Black","description":"\u003cp\u003eA contract package: high CRI at 500 lux for staff carrying out personal care, a night circuit at 5 lux, and no glare from a lying position, which is the specification most care home bathrooms miss.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 82.8 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132168574,"sku":"BBM-COM-012-SO","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132201342,"sku":"BBM-COM-012-SI","price":3374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Care_Home_Bathroom_Lighting_Package_in_Matt_Black.jpg?v=1789239638"},{"product_id":"gym-and-changing-room-lighting-package-in-matt-white","title":"Gym and Changing Room Lighting Package in Matt White","description":"\u003cp\u003eA contract package: IP65, impact rated to IK08, and an occupancy sensed circuit that leaves 10 per cent on so nobody walks into a dark changing room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 94.5 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132266878,"sku":"BBM-COM-013-SO","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132299646,"sku":"BBM-COM-013-SI","price":2824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Gym_and_Changing_Room_Lighting_Package_in_Matt_White.jpg?v=1789239747"},{"product_id":"gym-and-changing-room-lighting-package-in-brushed-chrome","title":"Gym and Changing Room Lighting Package in Brushed Chrome","description":"\u003cp\u003eA contract package: IP65, impact rated to IK08, and an occupancy sensed circuit that leaves 10 per cent on so nobody walks into a dark changing room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 96.4 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132332414,"sku":"BBM-COM-014-SO","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132365182,"sku":"BBM-COM-014-SI","price":3099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Gym_and_Changing_Room_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239747"},{"product_id":"gym-and-changing-room-lighting-package-in-matt-black","title":"Gym and Changing Room Lighting Package in Matt Black","description":"\u003cp\u003eA contract package: IP65, impact rated to IK08, and an occupancy sensed circuit that leaves 10 per cent on so nobody walks into a dark changing room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 96.4 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132463486,"sku":"BBM-COM-015-SO","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132496254,"sku":"BBM-COM-015-SI","price":3174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Gym_and_Changing_Room_Lighting_Package_in_Matt_Black.jpg?v=1789239750"},{"product_id":"serviced-apartment-bathroom-package-for-six-units-in-matt-white","title":"Serviced Apartment Bathroom Package for Six Units in Matt White","description":"\u003cp\u003eA contract package: six matched packages with a single spares kit, because a serviced apartment that cannot replace a driver in an hour has a room out of service for a week.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 61.2 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132529022,"sku":"BBM-COM-016-SO","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132561790,"sku":"BBM-COM-016-SI","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Serviced_Apartment_Bathroom_Package_for_Six_Units_in_Matt_White.jpg?v=1789239874"},{"product_id":"student-accommodation-washroom-package-in-matt-white","title":"Student Accommodation Washroom Package in Matt White","description":"\u003cp\u003eA contract package: vandal resistant IP65 fittings with captive screws, on a maintained emergency circuit, and every part still available in five years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 86.8 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132725630,"sku":"BBM-COM-019-SO","price":2024.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132758398,"sku":"BBM-COM-019-SI","price":2574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Student_Accommodation_Washroom_Package_in_Matt_White.jpg?v=1789239876"},{"product_id":"student-accommodation-washroom-package-in-brushed-chrome","title":"Student Accommodation Washroom Package in Brushed Chrome","description":"\u003cp\u003eA contract package: vandal resistant IP65 fittings with captive screws, on a maintained emergency circuit, and every part still available in five years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 88.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132823934,"sku":"BBM-COM-020-SO","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132856702,"sku":"BBM-COM-020-SI","price":2824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Student_Accommodation_Washroom_Package_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"student-accommodation-washroom-package-in-matt-black","title":"Student Accommodation Washroom Package in Matt Black","description":"\u003cp\u003eA contract package: vandal resistant IP65 fittings with captive screws, on a maintained emergency circuit, and every part still available in five years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 88.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132922238,"sku":"BBM-COM-021-SO","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132955006,"sku":"BBM-COM-021-SI","price":2899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Student_Accommodation_Washroom_Package_in_Matt_Black.jpg?v=1789239876"},{"product_id":"restaurant-washroom-lighting-package-in-matt-white","title":"Restaurant Washroom Lighting Package in Matt White","description":"\u003cp\u003eA contract package: a scheme where the washroom is part of the design rather than an afterthought, with warm high CRI light and a flattering mirror position.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 72.7 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132987774,"sku":"BBM-COM-022-SO","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133020542,"sku":"BBM-COM-022-SI","price":3124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Restaurant_Washroom_Lighting_Package_in_Matt_White.jpg?v=1789239866"},{"product_id":"restaurant-washroom-lighting-package-in-brushed-chrome","title":"Restaurant Washroom Lighting Package in Brushed Chrome","description":"\u003cp\u003eA contract package: a scheme where the washroom is part of the design rather than an afterthought, with warm high CRI light and a flattering mirror position.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 74.2 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023133053310,"sku":"BBM-COM-023-SO","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133086078,"sku":"BBM-COM-023-SI","price":3424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Restaurant_Washroom_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239874"},{"product_id":"restaurant-washroom-lighting-package-in-matt-black","title":"Restaurant Washroom Lighting Package in Matt Black","description":"\u003cp\u003eA contract package: a scheme where the washroom is part of the design rather than an afterthought, with warm high CRI light and a flattering mirror position.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 74.2 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023133118846,"sku":"BBM-COM-024-SO","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133151614,"sku":"BBM-COM-024-SI","price":3524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Restaurant_Washroom_Lighting_Package_in_Matt_Black.jpg?v=1789239871"},{"product_id":"leisure-centre-wet-area-lighting-package-in-matt-black","title":"Leisure Centre Wet Area Lighting Package in Matt Black","description":"\u003cp\u003eA contract package: IP65 marine grade fittings for a chlorinated atmosphere, which attacks fittings far faster than a domestic bathroom does.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 108.4 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023133315454,"sku":"BBM-COM-027-SO","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133348222,"sku":"BBM-COM-027-SI","price":3799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Leisure_Centre_Wet_Area_Lighting_Package_in_Matt_Black.jpg?v=1789239877"},{"product_id":"office-washroom-lighting-package-with-presence-detection-in-matt-white","title":"Office Washroom Lighting Package with Presence Detection in Matt White","description":"\u003cp\u003eA contract package: presence detection with a five minute hold and a daylight override, which is the easiest energy saving in any commercial building and the one most often specified badly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 75.3 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023133380990,"sku":"BBM-COM-028-SO","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133413758,"sku":"BBM-COM-028-SI","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Office_Washroom_Lighting_Package_with_Presence_Detection_in_Matt_White.jpg?v=1789239872"},{"product_id":"office-washroom-lighting-package-with-presence-detection-in-brushed-chrome","title":"Office Washroom Lighting Package with Presence Detection in Brushed Chrome","description":"\u003cp\u003eA contract package: presence detection with a five minute hold and a daylight override, which is the easiest energy saving in any commercial building and the one most often specified badly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 76.8 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023133446526,"sku":"BBM-COM-029-SO","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133479294,"sku":"BBM-COM-029-SI","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Office_Washroom_Lighting_Package_with_Presence_Detection_in_Brushed_Chrome.jpg?v=1789239869"},{"product_id":"office-washroom-lighting-package-with-presence-detection-in-matt-black","title":"Office Washroom Lighting Package with Presence Detection in Matt Black","description":"\u003cp\u003eA contract package: presence detection with a five minute hold and a daylight override, which is the easiest energy saving in any commercial building and the one most often specified badly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 76.8 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: not included, and available as an addition\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023133512062,"sku":"BBM-COM-030-SO","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023133544830,"sku":"BBM-COM-030-SI","price":3124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Office_Washroom_Lighting_Package_with_Presence_Detection_in_Matt_Black.jpg?v=1789239873"},{"product_id":"fire-rated-ip65-downlight-trade-pack-in-matt-white","title":"Fire Rated IP65 Downlight Trade Pack in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: the plain one: 30, 60 and 90 minute fire rated, IP65, integral driver, and a price per fitting that makes sense at ten.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023133577598,"sku":"BBM-FRP-001-P10","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023133610366,"sku":"BBM-FRP-001-P20","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023133643134,"sku":"BBM-FRP-001-P30","price":2849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_in_Matt_White.jpg?v=1789239729"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-tunable-colour-in-matt-white","title":"Fire Rated IP65 Downlight Trade Pack with Tunable Colour in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: a switch on the back selects 2700K, 3000K or 4000K, so one box covers a whole house and the bathroom does not have to be a separate order.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023133872510,"sku":"BBM-FRP-004-P10","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023133905278,"sku":"BBM-FRP-004-P20","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023133938046,"sku":"BBM-FRP-004-P30","price":3499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_Tunable_Colour_in_Matt_White.jpg?v=1789239739"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-dim-to-warm-in-matt-black","title":"Fire Rated IP65 Downlight Trade Pack with Dim to Warm in Matt Black","description":"\u003cp\u003eA trade pack of fire rated downlights: the colour temperature falls from 2700K to 1800K as it dims, which is what a halogen did and what people are actually asking for when they say they miss halogen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134265726,"sku":"BBM-FRP-008-P10","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134298494,"sku":"BBM-FRP-008-P20","price":2624.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134331262,"sku":"BBM-FRP-008-P30","price":3799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_Dim_to_Warm_in_Matt_Black.jpg?v=1789239735"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-cri-97-in-matt-white","title":"Fire Rated IP65 Downlight Trade Pack with CRI 97 in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: CRI 97 with R9 above 90, which is a photographic specification and worth the money in a bathroom and a kitchen and nowhere else.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134364030,"sku":"BBM-FRP-009-P10","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134396798,"sku":"BBM-FRP-009-P20","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134429566,"sku":"BBM-FRP-009-P30","price":3224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_CRI_97_in_Matt_White.jpg?v=1789239735"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-cri-97-in-brushed-chrome","title":"Fire Rated IP65 Downlight Trade Pack with CRI 97 in Brushed Chrome","description":"\u003cp\u003eA trade pack of fire rated downlights: CRI 97 with R9 above 90, which is a photographic specification and worth the money in a bathroom and a kitchen and nowhere else.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134462334,"sku":"BBM-FRP-010-P10","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134495102,"sku":"BBM-FRP-010-P20","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134527870,"sku":"BBM-FRP-010-P30","price":3549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_CRI_97_in_Brushed_Chrome.jpg?v=1789239740"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-cri-97-in-matt-black","title":"Fire Rated IP65 Downlight Trade Pack with CRI 97 in Matt Black","description":"\u003cp\u003eA trade pack of fire rated downlights: CRI 97 with R9 above 90, which is a photographic specification and worth the money in a bathroom and a kitchen and nowhere else.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134560638,"sku":"BBM-FRP-011-P10","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134593406,"sku":"BBM-FRP-011-P20","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134626174,"sku":"BBM-FRP-011-P30","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_CRI_97_in_Matt_Black.jpg?v=1789239738"},{"product_id":"fire-rated-airtight-ip65-downlight-trade-pack-in-matt-white","title":"Fire Rated Airtight IP65 Downlight Trade Pack in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: airtight to less than 0.5 cubic metres an hour, which is what a passive house or an airtightness test needs and what a normal downlight destroys.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134658942,"sku":"BBM-FRP-012-P10","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134691710,"sku":"BBM-FRP-012-P20","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134724478,"sku":"BBM-FRP-012-P30","price":3099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_Airtight_IP65_Downlight_Trade_Pack_in_Matt_White.jpg?v=1789239738"},{"product_id":"fire-rated-airtight-ip65-downlight-trade-pack-in-brushed-chrome","title":"Fire Rated Airtight IP65 Downlight Trade Pack in Brushed Chrome","description":"\u003cp\u003eA trade pack of fire rated downlights: airtight to less than 0.5 cubic metres an hour, which is what a passive house or an airtightness test needs and what a normal downlight destroys.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134757246,"sku":"BBM-FRP-013-P10","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134790014,"sku":"BBM-FRP-013-P20","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134822782,"sku":"BBM-FRP-013-P30","price":3399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_Airtight_IP65_Downlight_Trade_Pack_in_Brushed_Chrome.jpg?v=1789239740"},{"product_id":"fire-rated-airtight-ip65-downlight-trade-pack-in-matt-black","title":"Fire Rated Airtight IP65 Downlight Trade Pack in Matt Black","description":"\u003cp\u003eA trade pack of fire rated downlights: airtight to less than 0.5 cubic metres an hour, which is what a passive house or an airtightness test needs and what a normal downlight destroys.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134855550,"sku":"BBM-FRP-014-P10","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134888318,"sku":"BBM-FRP-014-P20","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023134921086,"sku":"BBM-FRP-014-P30","price":3499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_Airtight_IP65_Downlight_Trade_Pack_in_Matt_Black.jpg?v=1789239740"},{"product_id":"fire-rated-acoustic-ip65-downlight-trade-pack-in-matt-white","title":"Fire Rated Acoustic IP65 Downlight Trade Pack in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: an acoustic hood integrated into the fitting, keeping a 45dB floor at 45dB, which matters in a flat and is a building control question.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023134953854,"sku":"BBM-FRP-015-P10","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023134986622,"sku":"BBM-FRP-015-P20","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135019390,"sku":"BBM-FRP-015-P30","price":3499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_Acoustic_IP65_Downlight_Trade_Pack_in_Matt_White.jpg?v=1789239740"},{"product_id":"fire-rated-acoustic-ip65-downlight-trade-pack-in-brushed-chrome","title":"Fire Rated Acoustic IP65 Downlight Trade Pack in Brushed Chrome","description":"\u003cp\u003eA trade pack of fire rated downlights: an acoustic hood integrated into the fitting, keeping a 45dB floor at 45dB, which matters in a flat and is a building control question.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135052158,"sku":"BBM-FRP-016-P10","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135084926,"sku":"BBM-FRP-016-P20","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135117694,"sku":"BBM-FRP-016-P30","price":3824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_Acoustic_IP65_Downlight_Trade_Pack_in_Brushed_Chrome.jpg?v=1789239740"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-adjustable-tilt-in-matt-white","title":"Fire Rated IP65 Downlight Trade Pack with Adjustable Tilt in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: 30 degrees of tilt while staying IP65, which almost nothing manages, using a gimbal behind the gasket rather than in front of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135150462,"sku":"BBM-FRP-017-P10","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135183230,"sku":"BBM-FRP-017-P20","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135215998,"sku":"BBM-FRP-017-P30","price":3349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_Adjustable_Tilt_in_Matt_White.jpg?v=1789239732"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-adjustable-tilt-in-brushed-chrome","title":"Fire Rated IP65 Downlight Trade Pack with Adjustable Tilt in Brushed Chrome","description":"\u003cp\u003eA trade pack of fire rated downlights: 30 degrees of tilt while staying IP65, which almost nothing manages, using a gimbal behind the gasket rather than in front of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135248766,"sku":"BBM-FRP-018-P10","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135281534,"sku":"BBM-FRP-018-P20","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135314302,"sku":"BBM-FRP-018-P30","price":3674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_Adjustable_Tilt_in_Brushed_Chrome.jpg?v=1789239743"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-adjustable-tilt-in-matt-black","title":"Fire Rated IP65 Downlight Trade Pack with Adjustable Tilt in Matt Black","description":"\u003cp\u003eA trade pack of fire rated downlights: 30 degrees of tilt while staying IP65, which almost nothing manages, using a gimbal behind the gasket rather than in front of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135347070,"sku":"BBM-FRP-019-P10","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135379838,"sku":"BBM-FRP-019-P20","price":2624.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135412606,"sku":"BBM-FRP-019-P30","price":3799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_Adjustable_Tilt_in_Matt_Black.jpg?v=1789239738"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-a-narrow-beam-in-brushed-chrome","title":"Fire Rated IP65 Downlight Trade Pack with a Narrow Beam in Brushed Chrome","description":"\u003cp\u003eA trade pack of fire rated downlights: a 24 degree beam for a three metre ceiling, because a 60 degree beam from that height gives you an evenly lit floor and a dark face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135543678,"sku":"BBM-FRP-021-P10","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135576446,"sku":"BBM-FRP-021-P20","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135609214,"sku":"BBM-FRP-021-P30","price":3549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_a_Narrow_Beam_in_Brushed_Chrome.jpg?v=1789239742"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-a-narrow-beam-in-matt-black","title":"Fire Rated IP65 Downlight Trade Pack with a Narrow Beam in Matt Black","description":"\u003cp\u003eA trade pack of fire rated downlights: a 24 degree beam for a three metre ceiling, because a 60 degree beam from that height gives you an evenly lit floor and a dark face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135740286,"sku":"BBM-FRP-022-P10","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135773054,"sku":"BBM-FRP-022-P20","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135805822,"sku":"BBM-FRP-022-P30","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_a_Narrow_Beam_in_Matt_Black.jpg?v=1789239740"},{"product_id":"fire-rated-ip65-downlight-trade-pack-with-dali-drivers-in-matt-white","title":"Fire Rated IP65 Downlight Trade Pack with DALI Drivers in Matt White","description":"\u003cp\u003eA trade pack of fire rated downlights: DALI 2 drivers for a job that will be commissioned, which is every commercial job and an increasing number of large houses.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall diameter, 55mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 650 lumens per fitting at 92 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K as standard, or selectable on the models that say so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent without flicker or drop out\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 476 Part 21 fire testing with certificates for both plasterboard and timber joist constructions\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms per fitting\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003ePack: chosen above, and the price per fitting falls at twenty and again at thirty\u003c\/li\u003e\n\u003cli\u003eInsulation: may be covered directly with insulation, no hood required, which is the whole point of an integrated fire rated fitting\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 55mm, which clears a 47mm joist void and is the number that catches people out on a first floor bathroom\u003c\/li\u003e\n\u003cli\u003eCertificates: fire, IP and photometric test reports downloadable from this page rather than on request\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fittings, with integral drivers and flex tails\u003c\/li\u003e\n\u003cli\u003eIP65 rated push fit connectors\u003c\/li\u003e\n\u003cli\u003espare gaskets\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003efire and IP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The fitting is fire rated in itself, so no hood is needed and insulation may be laid straight over it. Check the 55mm insertion depth against your joist void before you cut the first hole, because a first floor bathroom ceiling with 47mm joists and a plasterboard skin is tighter than it looks.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFire rating is not a nice to have. If the ceiling below the bathroom is a fire compartment, which it is in every flat and in most two storey houses where the room below is habitable, cutting an 85mm hole in it without a fire rated fitting or a hood breaches Part B of the Building Regulations. The certificate for these is on this page, for both plasterboard and timber joist constructions, because a fitting tested in only one of those is only rated in one of those.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Pack of ten","offer_id":58023135871358,"sku":"BBM-FRP-023-P10","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of twenty","offer_id":58023135904126,"sku":"BBM-FRP-023-P20","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of thirty","offer_id":58023135936894,"sku":"BBM-FRP-023-P30","price":3624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Fire_Rated_IP65_Downlight_Trade_Pack_with_DALI_Drivers_in_Matt_White.jpg?v=1789239735"},{"product_id":"trailing-edge-dimmer-for-led-lighting","title":"Trailing Edge Dimmer for LED Lighting","description":"\u003cp\u003eThe part that decides whether the light behaves: a dimmer with a 5 to 250W range and an adjustable minimum, which is the setting that stops LEDs flickering at the bottom of the dial.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, 5 to 250W, with an adjustable minimum\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170212222,"sku":"BBM-DRV-001-X1","price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Trailing_Edge_Dimmer_for_LED_Lighting.jpg?v=1789239875"},{"product_id":"trailing-edge-dimmer-with-a-two-way-function","title":"Trailing Edge Dimmer with a Two Way Function","description":"\u003cp\u003eThe part that decides whether the light behaves: the same dimmer wired at two positions, for a bathroom with a door at each end.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, 5 to 250W, with an adjustable minimum\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.35 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170244990,"sku":"BBM-DRV-002-X1","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Trailing_Edge_Dimmer_with_a_Two_Way_Function.jpg?v=1789239877"},{"product_id":"rotary-dimmer-with-an-adjustable-minimum","title":"Rotary Dimmer with an Adjustable Minimum","description":"\u003cp\u003eThe part that decides whether the light behaves: a screwdriver trim for the minimum, which is how you tune out the drop out point of whatever drivers you actually have.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, 5 to 250W, with an adjustable minimum\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170277758,"sku":"BBM-DRV-003-X1","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Rotary_Dimmer_with_an_Adjustable_Minimum.jpg?v=1789239866"},{"product_id":"selv-transformer-for-zone-0-lighting","title":"SELV Transformer for Zone 0 Lighting","description":"\u003cp\u003eThe part that decides whether the light behaves: a 12 volt transformer to be sited outside the zones, which is what makes a zone 0 fitting lawful.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.90 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170310526,"sku":"BBM-DRV-004-X1","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/SELV_Transformer_for_Zone_0_Lighting.jpg?v=1789239864"},{"product_id":"constant-current-led-driver-at-350ma","title":"Constant Current LED Driver at 350mA","description":"\u003cp\u003eThe part that decides whether the light behaves: a replacement driver, because a driver is the part that fails and a fitting is not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.25 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170343294,"sku":"BBM-DRV-005-X1","price":31.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Constant_Current_LED_Driver_at_350mA.jpg?v=1789239654"},{"product_id":"constant-voltage-led-driver-at-24v-and-60w","title":"Constant Voltage LED Driver at 24V and 60W","description":"\u003cp\u003eThe part that decides whether the light behaves: for a tape run, sized with 20 per cent headroom, which is the rule that decides whether a driver lasts three years or ten.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.40 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170376062,"sku":"BBM-DRV-006-X1","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Constant_Voltage_LED_Driver_at_24V_and_60W.jpg?v=1789239653"},{"product_id":"ip67-led-driver-for-a-wet-location","title":"IP67 LED Driver for a Wet Location","description":"\u003cp\u003eThe part that decides whether the light behaves: a potted driver that can live in a damp void, for the situations where there is nowhere dry to put one.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP67. Dust tight and protected against temporary immersion in up to a metre of water, which is what zone 0 requires and what a fitting in a shower tray or a bath surround has to be\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.60 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170408830,"sku":"BBM-DRV-007-X1","price":69.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP67_LED_Driver_for_a_Wet_Location.jpg?v=1789239869"},{"product_id":"dali-2-led-driver","title":"DALI 2 LED Driver","description":"\u003cp\u003eThe part that decides whether the light behaves: an addressable driver for a commissioned scheme.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here\u003c\/li\u003e\n\u003cli\u003eIP rating: IP20. No water protection at all. This is a dry area product and it must not be installed in any bathroom zone. We stock it because plenty of cloakrooms have no bath or shower in them, and we say so plainly rather than letting somebody find out\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.40 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170441598,"sku":"BBM-DRV-008-X1","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/DALI_2_LED_Driver.jpg?v=1789239656"},{"product_id":"pull-cord-switch-in-a-ceiling-rose","title":"Pull Cord Switch in a Ceiling Rose","description":"\u003cp\u003eThe part that decides whether the light behaves: a 6 amp cord switch, which is the switch a bathroom may have inside it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: standard back box or a driver case, and the case dimensions are on the drawing\u003c\/li\u003e\n\u003cli\u003eLight output: not applicable, this is a control or a supply\u003c\/li\u003e\n\u003cli\u003eColour temperature: not applicable\u003c\/li\u003e\n\u003cli\u003eColour rendering: not applicable to a control. It is the driver quality that decides whether the fitting it feeds flickers, which is why we sell drivers as a named part rather than as a mystery inside a box\u003c\/li\u003e\n\u003cli\u003eDimming: not applicable\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 unless stated. Every driver here is a named part with a datasheet, and it is stocked as a spare for ten years\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 61347 for the driver, BS EN 61558-2-6 for the transformer, BS EN 60669 for the switch, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.20 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003ePosition: a driver or a transformer must be accessible for maintenance. A driver sealed into a plasterboard void is a future ceiling repair\u003c\/li\u003e\n\u003cli\u003eHeadroom: size a driver at 80 per cent of its rating. A driver run at its limit runs hot and a hot driver is a short driver\u003c\/li\u003e\n\u003cli\u003eCompatibility: tell us what fittings you are running and we will confirm the combination before you order\u003c\/li\u003e\n\u003cli\u003eZone: controls and drivers go outside the zones unless they are specifically rated, and most are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe item\u003c\/li\u003e\n\u003cli\u003ea datasheet with the part number\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003cli\u003eterminal screws and a gland where needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Put the driver somewhere you can reach it again. That single decision is the difference between a ten minute repair and a ceiling.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eNearly every complaint about LED lighting is a driver complaint. Flicker at low brightness, a step at 15 per cent, a buzz on the dimmer, lights that come on at different times: all driver. So we sell drivers as named parts with datasheets and part numbers, we stock them for ten years, and we will confirm a dimmer and driver combination before you order rather than after you have wired it in.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170539902,"sku":"BBM-DRV-011-X1","price":27.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pull_Cord_Switch_in_a_Ceiling_Rose.jpg?v=1789239862"}],"url":"https:\/\/batheandbeam.com\/collections\/trade.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}