{"title":"Bathroom Pendants","description":"\u003cp\u003eGlass, alabaster, brass and fabric pendants rated for a bathroom — the fitting that turns a bathroom into a room. A pendant hanging into the space above a bath must be rated for zone 1, regardless of how high the ceiling is.\u003c\/p\u003e","products":[{"product_id":"ip44-rated-glass-pendant-for-over-a-bath-in-brushed-chrome","title":"IP44 Rated Glass Pendant for Over a Bath in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a hand blown glass pendant that is actually rated for zone 1, which almost no decorative pendant is, using a sealed lamp holder and a gasketed ceiling rose.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023141802366,"sku":"BBM-PEN-001-27","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023141835134,"sku":"BBM-PEN-001-30","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023141867902,"sku":"BBM-PEN-001-40","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Glass_Pendant_for_Over_a_Bath_in_Brushed_Chrome.jpg?v=1789239803"},{"product_id":"ip44-rated-glass-pendant-for-over-a-bath-in-brushed-brass","title":"IP44 Rated Glass Pendant for Over a Bath in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a hand blown glass pendant that is actually rated for zone 1, which almost no decorative pendant is, using a sealed lamp holder and a gasketed ceiling rose.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023141900670,"sku":"BBM-PEN-002-27","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023141933438,"sku":"BBM-PEN-002-30","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023141966206,"sku":"BBM-PEN-002-40","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Glass_Pendant_for_Over_a_Bath_in_Brushed_Brass.jpg?v=1789239810"},{"product_id":"ip44-rated-glass-pendant-for-over-a-bath-in-polished-nickel","title":"IP44 Rated Glass Pendant for Over a Bath in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a hand blown glass pendant that is actually rated for zone 1, which almost no decorative pendant is, using a sealed lamp holder and a gasketed ceiling rose.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142031742,"sku":"BBM-PEN-003-27","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142064510,"sku":"BBM-PEN-003-30","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142097278,"sku":"BBM-PEN-003-40","price":1474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Glass_Pendant_for_Over_a_Bath_in_Polished_Nickel.jpg?v=1789239803"},{"product_id":"ip44-rated-glass-pendant-for-over-a-bath-in-brushed-stainless","title":"IP44 Rated Glass Pendant for Over a Bath in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a hand blown glass pendant that is actually rated for zone 1, which almost no decorative pendant is, using a sealed lamp holder and a gasketed ceiling rose.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142130046,"sku":"BBM-PEN-004-27","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142162814,"sku":"BBM-PEN-004-30","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142195582,"sku":"BBM-PEN-004-40","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Glass_Pendant_for_Over_a_Bath_in_Brushed_Stainless.jpg?v=1789239812"},{"product_id":"ip44-rated-crystal-chandelier-for-a-bathroom-in-brushed-chrome","title":"IP44 Rated Crystal Chandelier for a Bathroom in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a small chandelier rated for zone 2, with sealed holders and a stainless canopy, for the bathroom that is trying to be a room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142228350,"sku":"BBM-PEN-005-27","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142261118,"sku":"BBM-PEN-005-30","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142293886,"sku":"BBM-PEN-005-40","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Crystal_Chandelier_for_a_Bathroom_in_Brushed_Chrome.jpg?v=1789239812"},{"product_id":"ip44-rated-crystal-chandelier-for-a-bathroom-in-brushed-brass","title":"IP44 Rated Crystal Chandelier for a Bathroom in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a small chandelier rated for zone 2, with sealed holders and a stainless canopy, for the bathroom that is trying to be a room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142326654,"sku":"BBM-PEN-006-27","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142359422,"sku":"BBM-PEN-006-30","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142392190,"sku":"BBM-PEN-006-40","price":2499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Crystal_Chandelier_for_a_Bathroom_in_Brushed_Brass.jpg?v=1789239813"},{"product_id":"ip44-rated-crystal-chandelier-for-a-bathroom-in-polished-nickel","title":"IP44 Rated Crystal Chandelier for a Bathroom in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a small chandelier rated for zone 2, with sealed holders and a stainless canopy, for the bathroom that is trying to be a room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142424958,"sku":"BBM-PEN-007-27","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142457726,"sku":"BBM-PEN-007-30","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142490494,"sku":"BBM-PEN-007-40","price":2699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Crystal_Chandelier_for_a_Bathroom_in_Polished_Nickel.jpg?v=1789239814"},{"product_id":"ip44-rated-crystal-chandelier-for-a-bathroom-in-brushed-stainless","title":"IP44 Rated Crystal Chandelier for a Bathroom in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a small chandelier rated for zone 2, with sealed holders and a stainless canopy, for the bathroom that is trying to be a room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142523262,"sku":"BBM-PEN-008-27","price":2924.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142556030,"sku":"BBM-PEN-008-30","price":2924.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142588798,"sku":"BBM-PEN-008-40","price":2924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Crystal_Chandelier_for_a_Bathroom_in_Brushed_Stainless.jpg?v=1789239814"},{"product_id":"ip65-rated-pendant-cluster-for-over-a-bath-in-brushed-chrome","title":"IP65 Rated Pendant Cluster for Over a Bath in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three pendants at staggered drops on one gasketed rose, wired as one point.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142982014,"sku":"BBM-PEN-009-27","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023143014782,"sku":"BBM-PEN-009-30","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023143047550,"sku":"BBM-PEN-009-40","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_Cluster_for_Over_a_Bath_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"ip65-rated-pendant-cluster-for-over-a-bath-in-brushed-stainless","title":"IP65 Rated Pendant Cluster for Over a Bath in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three pendants at staggered drops on one gasketed rose, wired as one point.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023143637374,"sku":"BBM-PEN-012-27","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023143670142,"sku":"BBM-PEN-012-30","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023143702910,"sku":"BBM-PEN-012-40","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_Cluster_for_Over_a_Bath_in_Brushed_Stainless.jpg?v=1789239862"},{"product_id":"ip44-rated-opal-globe-pendant-in-brushed-chrome","title":"IP44 Rated Opal Globe Pendant in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a 300mm opal globe, which throws light in every direction and is the least glaring thing you can hang over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023143735678,"sku":"BBM-PEN-013-27","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023143768446,"sku":"BBM-PEN-013-30","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023143801214,"sku":"BBM-PEN-013-40","price":1124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Opal_Globe_Pendant_in_Brushed_Chrome.jpg?v=1789239806"},{"product_id":"ip44-rated-opal-globe-pendant-in-brushed-brass","title":"IP44 Rated Opal Globe Pendant in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a 300mm opal globe, which throws light in every direction and is the least glaring thing you can hang over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023143833982,"sku":"BBM-PEN-014-27","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023143866750,"sku":"BBM-PEN-014-30","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023143899518,"sku":"BBM-PEN-014-40","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Opal_Globe_Pendant_in_Brushed_Brass.jpg?v=1789239800"},{"product_id":"ip44-rated-opal-globe-pendant-in-polished-nickel","title":"IP44 Rated Opal Globe Pendant in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a 300mm opal globe, which throws light in every direction and is the least glaring thing you can hang over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023143932286,"sku":"BBM-PEN-015-27","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023143965054,"sku":"BBM-PEN-015-30","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023143997822,"sku":"BBM-PEN-015-40","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Opal_Globe_Pendant_in_Polished_Nickel.jpg?v=1789239814"},{"product_id":"ip44-rated-opal-globe-pendant-in-brushed-stainless","title":"IP44 Rated Opal Globe Pendant in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a 300mm opal globe, which throws light in every direction and is the least glaring thing you can hang over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023144030590,"sku":"BBM-PEN-016-27","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023144063358,"sku":"BBM-PEN-016-30","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023144096126,"sku":"BBM-PEN-016-40","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Opal_Globe_Pendant_in_Brushed_Stainless.jpg?v=1789239803"},{"product_id":"ip44-rated-ribbed-glass-pendant-pair-in-brushed-chrome","title":"IP44 Rated Ribbed Glass Pendant Pair in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a matched pair for either side of a mirror, hung at 1600mm to the centre of the glass, which is the height that lights a face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023144620414,"sku":"BBM-PEN-017-27","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023144653182,"sku":"BBM-PEN-017-30","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023144685950,"sku":"BBM-PEN-017-40","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Ribbed_Glass_Pendant_Pair_in_Brushed_Chrome.jpg?v=1789239812"},{"product_id":"ip44-rated-ribbed-glass-pendant-pair-in-brushed-brass","title":"IP44 Rated Ribbed Glass Pendant Pair in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a matched pair for either side of a mirror, hung at 1600mm to the centre of the glass, which is the height that lights a face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023144718718,"sku":"BBM-PEN-018-27","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023144751486,"sku":"BBM-PEN-018-30","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023144784254,"sku":"BBM-PEN-018-40","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Ribbed_Glass_Pendant_Pair_in_Brushed_Brass.jpg?v=1789239812"},{"product_id":"ip44-rated-ribbed-glass-pendant-pair-in-polished-nickel","title":"IP44 Rated Ribbed Glass Pendant Pair in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a matched pair for either side of a mirror, hung at 1600mm to the centre of the glass, which is the height that lights a face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023144817022,"sku":"BBM-PEN-019-27","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023144849790,"sku":"BBM-PEN-019-30","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023144882558,"sku":"BBM-PEN-019-40","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Ribbed_Glass_Pendant_Pair_in_Polished_Nickel.jpg?v=1789239812"},{"product_id":"ip44-rated-ribbed-glass-pendant-pair-in-brushed-stainless","title":"IP44 Rated Ribbed Glass Pendant Pair in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a matched pair for either side of a mirror, hung at 1600mm to the centre of the glass, which is the height that lights a face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023144915326,"sku":"BBM-PEN-020-27","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023144948094,"sku":"BBM-PEN-020-30","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023144980862,"sku":"BBM-PEN-020-40","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Ribbed_Glass_Pendant_Pair_in_Brushed_Stainless.jpg?v=1789239812"},{"product_id":"ip44-rated-brass-lantern-for-a-bathroom-in-brushed-chrome","title":"IP44 Rated Brass Lantern for a Bathroom in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a solid brass lantern with a sealed glass, for a period bathroom where a downlight would be wrong.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145079166,"sku":"BBM-PEN-021-27","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145111934,"sku":"BBM-PEN-021-30","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145144702,"sku":"BBM-PEN-021-40","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Brass_Lantern_for_a_Bathroom_in_Brushed_Chrome.jpg?v=1789239814"},{"product_id":"ip44-rated-brass-lantern-for-a-bathroom-in-brushed-brass","title":"IP44 Rated Brass Lantern for a Bathroom in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a solid brass lantern with a sealed glass, for a period bathroom where a downlight would be wrong.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145177470,"sku":"BBM-PEN-022-27","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145210238,"sku":"BBM-PEN-022-30","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145243006,"sku":"BBM-PEN-022-40","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Brass_Lantern_for_a_Bathroom_in_Brushed_Brass.jpg?v=1789239808"},{"product_id":"ip44-rated-brass-lantern-for-a-bathroom-in-polished-nickel","title":"IP44 Rated Brass Lantern for a Bathroom in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a solid brass lantern with a sealed glass, for a period bathroom where a downlight would be wrong.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145275774,"sku":"BBM-PEN-023-27","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145308542,"sku":"BBM-PEN-023-30","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145341310,"sku":"BBM-PEN-023-40","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Brass_Lantern_for_a_Bathroom_in_Polished_Nickel.jpg?v=1789239808"},{"product_id":"ip65-rated-pendant-for-a-wet-room-in-brushed-chrome","title":"IP65 Rated Pendant for a Wet Room in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: 316 stainless and a bonded glass, rated for zone 1 in a room that is wet all day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145472382,"sku":"BBM-PEN-025-27","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145505150,"sku":"BBM-PEN-025-30","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145537918,"sku":"BBM-PEN-025-40","price":1799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_for_a_Wet_Room_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"ip65-rated-pendant-for-a-wet-room-in-brushed-brass","title":"IP65 Rated Pendant for a Wet Room in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: 316 stainless and a bonded glass, rated for zone 1 in a room that is wet all day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145603454,"sku":"BBM-PEN-026-27","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145636222,"sku":"BBM-PEN-026-30","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145668990,"sku":"BBM-PEN-026-40","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_for_a_Wet_Room_in_Brushed_Brass.jpg?v=1789239861"},{"product_id":"ip65-rated-pendant-for-a-wet-room-in-polished-nickel","title":"IP65 Rated Pendant for a Wet Room in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: 316 stainless and a bonded glass, rated for zone 1 in a room that is wet all day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145734526,"sku":"BBM-PEN-027-27","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145767294,"sku":"BBM-PEN-027-30","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145800062,"sku":"BBM-PEN-027-40","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_for_a_Wet_Room_in_Polished_Nickel.jpg?v=1789239863"},{"product_id":"ip65-rated-pendant-for-a-wet-room-in-brushed-stainless","title":"IP65 Rated Pendant for a Wet Room in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: 316 stainless and a bonded glass, rated for zone 1 in a room that is wet all day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145832830,"sku":"BBM-PEN-028-27","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145865598,"sku":"BBM-PEN-028-30","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145898366,"sku":"BBM-PEN-028-40","price":2699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_for_a_Wet_Room_in_Brushed_Stainless.jpg?v=1789239875"},{"product_id":"ip44-rated-alabaster-pendant-in-brushed-chrome","title":"IP44 Rated Alabaster Pendant in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: hand carved alabaster, sealed against humidity, which is a stone that behaves badly in a bathroom unless it is properly finished and beautifully when it is.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146029438,"sku":"BBM-PEN-029-27","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146062206,"sku":"BBM-PEN-029-30","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146094974,"sku":"BBM-PEN-029-40","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Alabaster_Pendant_in_Brushed_Chrome.jpg?v=1789239799"},{"product_id":"ip44-rated-alabaster-pendant-in-brushed-brass","title":"IP44 Rated Alabaster Pendant in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: hand carved alabaster, sealed against humidity, which is a stone that behaves badly in a bathroom unless it is properly finished and beautifully when it is.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146127742,"sku":"BBM-PEN-030-27","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146160510,"sku":"BBM-PEN-030-30","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146193278,"sku":"BBM-PEN-030-40","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Alabaster_Pendant_in_Brushed_Brass.jpg?v=1789239802"},{"product_id":"ip44-rated-alabaster-pendant-in-polished-nickel","title":"IP44 Rated Alabaster Pendant in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: hand carved alabaster, sealed against humidity, which is a stone that behaves badly in a bathroom unless it is properly finished and beautifully when it is.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146226046,"sku":"BBM-PEN-031-27","price":3249.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146258814,"sku":"BBM-PEN-031-30","price":3249.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146291582,"sku":"BBM-PEN-031-40","price":3249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Alabaster_Pendant_in_Polished_Nickel.jpg?v=1789239799"},{"product_id":"ip44-rated-alabaster-pendant-in-brushed-stainless","title":"IP44 Rated Alabaster Pendant in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: hand carved alabaster, sealed against humidity, which is a stone that behaves badly in a bathroom unless it is properly finished and beautifully when it is.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146324350,"sku":"BBM-PEN-032-27","price":3549.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146357118,"sku":"BBM-PEN-032-30","price":3549.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146389886,"sku":"BBM-PEN-032-40","price":3549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Alabaster_Pendant_in_Brushed_Stainless.jpg?v=1789239802"},{"product_id":"ip44-rated-fluted-glass-pendant-trio-in-brushed-chrome","title":"IP44 Rated Fluted Glass Pendant Trio in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three fluted cylinders on a linear rose, for a long room or over a double basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146422654,"sku":"BBM-PEN-033-27","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146455422,"sku":"BBM-PEN-033-30","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146488190,"sku":"BBM-PEN-033-40","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Fluted_Glass_Pendant_Trio_in_Brushed_Chrome.jpg?v=1789239810"},{"product_id":"ip44-rated-fluted-glass-pendant-trio-in-brushed-brass","title":"IP44 Rated Fluted Glass Pendant Trio in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three fluted cylinders on a linear rose, for a long room or over a double basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146520958,"sku":"BBM-PEN-034-27","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146553726,"sku":"BBM-PEN-034-30","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146586494,"sku":"BBM-PEN-034-40","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Fluted_Glass_Pendant_Trio_in_Brushed_Brass.jpg?v=1789239808"},{"product_id":"ip44-rated-fluted-glass-pendant-trio-in-polished-nickel","title":"IP44 Rated Fluted Glass Pendant Trio in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three fluted cylinders on a linear rose, for a long room or over a double basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146619262,"sku":"BBM-PEN-035-27","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146652030,"sku":"BBM-PEN-035-30","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146684798,"sku":"BBM-PEN-035-40","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Fluted_Glass_Pendant_Trio_in_Polished_Nickel.jpg?v=1789239808"},{"product_id":"ip44-rated-fluted-glass-pendant-trio-in-brushed-stainless","title":"IP44 Rated Fluted Glass Pendant Trio in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three fluted cylinders on a linear rose, for a long room or over a double basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146717566,"sku":"BBM-PEN-036-27","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146750334,"sku":"BBM-PEN-036-30","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146783102,"sku":"BBM-PEN-036-40","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Fluted_Glass_Pendant_Trio_in_Brushed_Stainless.jpg?v=1789239812"},{"product_id":"ip44-rated-pendant-with-a-fabric-shade-in-brushed-chrome","title":"IP44 Rated Pendant with a Fabric Shade in Brushed Chrome","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a moisture resistant fabric shade over a sealed holder, for a bathroom outside the zones where the fitting can be softer.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146848638,"sku":"BBM-PEN-037-27","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146881406,"sku":"BBM-PEN-037-30","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146914174,"sku":"BBM-PEN-037-40","price":1174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Pendant_with_a_Fabric_Shade_in_Brushed_Chrome.jpg?v=1789239806"},{"product_id":"ip44-rated-pendant-with-a-fabric-shade-in-brushed-brass","title":"IP44 Rated Pendant with a Fabric Shade in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a moisture resistant fabric shade over a sealed holder, for a bathroom outside the zones where the fitting can be softer.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023147012478,"sku":"BBM-PEN-038-27","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023147045246,"sku":"BBM-PEN-038-30","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023147078014,"sku":"BBM-PEN-038-40","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Pendant_with_a_Fabric_Shade_in_Brushed_Brass.jpg?v=1789239803"},{"product_id":"ip44-rated-pendant-with-a-fabric-shade-in-polished-nickel","title":"IP44 Rated Pendant with a Fabric Shade in Polished Nickel","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a moisture resistant fabric shade over a sealed holder, for a bathroom outside the zones where the fitting can be softer.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel, warmer than chrome under a 2700K lamp and the finish that suits a period bathroom\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023147110782,"sku":"BBM-PEN-039-27","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023147143550,"sku":"BBM-PEN-039-30","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023147176318,"sku":"BBM-PEN-039-40","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Pendant_with_a_Fabric_Shade_in_Polished_Nickel.jpg?v=1789239800"},{"product_id":"ip44-rated-pendant-with-a-fabric-shade-in-brushed-stainless","title":"IP44 Rated Pendant with a Fabric Shade in Brushed Stainless","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a moisture resistant fabric shade over a sealed holder, for a bathroom outside the zones where the fitting can be softer.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023147209086,"sku":"BBM-PEN-040-27","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023147241854,"sku":"BBM-PEN-040-30","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023147274622,"sku":"BBM-PEN-040-40","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Pendant_with_a_Fabric_Shade_in_Brushed_Stainless.jpg?v=1789239800"}],"url":"https:\/\/batheandbeam.com\/collections\/pendants.oembed?page=2","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}