{"title":"Over £2,000","description":"\u003cp\u003eCircadian systems, installed packages and multi-room contract work. At this size, send us the room and let us specify the scheme rather than assembling it from the catalogue.\u003c\/p\u003e","products":[{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-polished-chrome","title":"Bathroom Lighting Scheme with a Demisting Mirror in Polished Chrome","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023066435966,"sku":"BBM-SCH-005-R8","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023066468734,"sku":"BBM-SCH-005-R4","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023066501502,"sku":"BBM-SCH-005-R14","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Polished_Chrome.jpg?v=1789239658"},{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023069679998,"sku":"BBM-SCH-006-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023069712766,"sku":"BBM-SCH-006-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023069745534,"sku":"BBM-SCH-006-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-matt-black","title":"Bathroom Lighting Scheme with a Demisting Mirror in Matt Black","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023072956798,"sku":"BBM-SCH-008-R8","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023072989566,"sku":"BBM-SCH-008-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023073022334,"sku":"BBM-SCH-008-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Matt_Black.jpg?v=1789239659"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-polished-chrome","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Polished Chrome","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023073087870,"sku":"BBM-SCH-009-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023073120638,"sku":"BBM-SCH-009-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023073153406,"sku":"BBM-SCH-009-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Polished_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023073251710,"sku":"BBM-SCH-010-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023073284478,"sku":"BBM-SCH-010-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023073317246,"sku":"BBM-SCH-010-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Brushed_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-matt-white","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Matt White","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023074333054,"sku":"BBM-SCH-011-R8","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023074365822,"sku":"BBM-SCH-011-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023074398590,"sku":"BBM-SCH-011-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Matt_White.jpg?v=1789239655"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-matt-black","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Matt Black","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023076987262,"sku":"BBM-SCH-012-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023077020030,"sku":"BBM-SCH-012-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023077052798,"sku":"BBM-SCH-012-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Matt_Black.jpg?v=1789239644"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-polished-chrome","title":"Bathroom Lighting Scheme with Layered Light in Polished Chrome","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023081410942,"sku":"BBM-SCH-017-R8","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023081443710,"sku":"BBM-SCH-017-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023081476478,"sku":"BBM-SCH-017-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Polished_Chrome.jpg?v=1789239652"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-brushed-chrome","title":"Bathroom Lighting Scheme with Layered Light in Brushed Chrome","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023081673086,"sku":"BBM-SCH-018-R8","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023081705854,"sku":"BBM-SCH-018-R4","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023081738622,"sku":"BBM-SCH-018-R14","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Brushed_Chrome.jpg?v=1789239655"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-matt-white","title":"Bathroom Lighting Scheme with Layered Light in Matt White","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.5 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023081804158,"sku":"BBM-SCH-019-R8","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023081836926,"sku":"BBM-SCH-019-R4","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023081869694,"sku":"BBM-SCH-019-R14","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Matt_White.jpg?v=1789239653"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-matt-black","title":"Bathroom Lighting Scheme with Layered Light in Matt Black","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023082099070,"sku":"BBM-SCH-020-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023082131838,"sku":"BBM-SCH-020-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023082164606,"sku":"BBM-SCH-020-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Matt_Black.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-polished-chrome","title":"Bathroom Lighting Scheme with a Feature Pendant in Polished Chrome","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023093240190,"sku":"BBM-SCH-029-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023093272958,"sku":"BBM-SCH-029-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023093305726,"sku":"BBM-SCH-029-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Polished_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Feature Pendant in Brushed Chrome","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023095337342,"sku":"BBM-SCH-030-R8","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023095370110,"sku":"BBM-SCH-030-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023095402878,"sku":"BBM-SCH-030-R14","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Brushed_Chrome.jpg?v=1789239658"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-matt-white","title":"Bathroom Lighting Scheme with a Feature Pendant in Matt White","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.9 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023095468414,"sku":"BBM-SCH-031-R8","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023095501182,"sku":"BBM-SCH-031-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023095533950,"sku":"BBM-SCH-031-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Matt_White.jpg?v=1789239638"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-matt-black","title":"Bathroom Lighting Scheme with a Feature Pendant in Matt Black","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023095697790,"sku":"BBM-SCH-032-R8","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023095730558,"sku":"BBM-SCH-032-R4","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023095763326,"sku":"BBM-SCH-032-R14","price":2599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Matt_Black.jpg?v=1789239654"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-polished-chrome","title":"Bathroom Lighting Scheme with Cove Lighting in Polished Chrome","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023097762174,"sku":"BBM-SCH-033-R8","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023097794942,"sku":"BBM-SCH-033-R4","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023097827710,"sku":"BBM-SCH-033-R14","price":2724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Polished_Chrome.jpg?v=1789239661"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-brushed-chrome","title":"Bathroom Lighting Scheme with Cove Lighting in Brushed Chrome","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023099531646,"sku":"BBM-SCH-034-R8","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023099564414,"sku":"BBM-SCH-034-R4","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023099597182,"sku":"BBM-SCH-034-R14","price":2799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Brushed_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-matt-white","title":"Bathroom Lighting Scheme with Cove Lighting in Matt White","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.1 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023101464958,"sku":"BBM-SCH-035-R8","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023101497726,"sku":"BBM-SCH-035-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023101530494,"sku":"BBM-SCH-035-R14","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Matt_White.jpg?v=1789239661"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-matt-black","title":"Bathroom Lighting Scheme with Cove Lighting in Matt Black","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023101596030,"sku":"BBM-SCH-036-R8","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023101628798,"sku":"BBM-SCH-036-R4","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023101661566,"sku":"BBM-SCH-036-R14","price":2874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Matt_Black.jpg?v=1789239644"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-polished-chrome","title":"Bathroom Lighting Scheme for a High Ceiling in Polished Chrome","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023101956478,"sku":"BBM-SCH-037-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023101989246,"sku":"BBM-SCH-037-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023102022014,"sku":"BBM-SCH-037-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Polished_Chrome.jpg?v=1789239648"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-brushed-chrome","title":"Bathroom Lighting Scheme for a High Ceiling in Brushed Chrome","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023104315774,"sku":"BBM-SCH-038-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023104348542,"sku":"BBM-SCH-038-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023104381310,"sku":"BBM-SCH-038-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Brushed_Chrome.jpg?v=1789239656"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-matt-white","title":"Bathroom Lighting Scheme for a High Ceiling in Matt White","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.3 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023107395966,"sku":"BBM-SCH-039-R8","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023107428734,"sku":"BBM-SCH-039-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023107461502,"sku":"BBM-SCH-039-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Matt_White.jpg?v=1789239645"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-matt-black","title":"Bathroom Lighting Scheme for a High Ceiling in Matt Black","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023109230974,"sku":"BBM-SCH-040-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023109263742,"sku":"BBM-SCH-040-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023109296510,"sku":"BBM-SCH-040-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Matt_Black.jpg?v=1789239650"},{"product_id":"bathroom-lighting-scheme-with-an-extractor-fan-in-brushed-chrome","title":"Bathroom Lighting Scheme with an Extractor Fan in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the fan and the lights specified together with the fan on an overrun timer and the extract rate matched to the room volume, which is what building regulations ask for and almost nobody calculates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023110148478,"sku":"BBM-SCH-042-R8","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023110181246,"sku":"BBM-SCH-042-R4","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023110214014,"sku":"BBM-SCH-042-R14","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_an_Extractor_Fan_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-an-extractor-fan-in-matt-black","title":"Bathroom Lighting Scheme with an Extractor Fan in Matt Black","description":"\u003cp\u003eA complete scheme: the fan and the lights specified together with the fan on an overrun timer and the extract rate matched to the room volume, which is what building regulations ask for and almost nobody calculates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023112606078,"sku":"BBM-SCH-044-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023112638846,"sku":"BBM-SCH-044-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023112671614,"sku":"BBM-SCH-044-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_an_Extractor_Fan_in_Matt_Black.jpg?v=1789239659"},{"product_id":"bathroom-lighting-scheme-with-a-tunable-mirror-light-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Tunable Mirror Light in Brushed Chrome","description":"\u003cp\u003eA complete scheme: a mirror light that runs 2700K in the evening and 5000K in the morning, which is the one place in a house where a tunable fitting is worth the money.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023113949566,"sku":"BBM-SCH-046-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023113982334,"sku":"BBM-SCH-046-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023114015102,"sku":"BBM-SCH-046-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Tunable_Mirror_Light_in_Brushed_Chrome.jpg?v=1789239659"},{"product_id":"bathroom-lighting-scheme-with-a-tunable-mirror-light-in-matt-white","title":"Bathroom Lighting Scheme with a Tunable Mirror Light in Matt White","description":"\u003cp\u003eA complete scheme: a mirror light that runs 2700K in the evening and 5000K in the morning, which is the one place in a house where a tunable fitting is worth the money.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.0 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023116505470,"sku":"BBM-SCH-047-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023116538238,"sku":"BBM-SCH-047-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023116571006,"sku":"BBM-SCH-047-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Tunable_Mirror_Light_in_Matt_White.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-tunable-mirror-light-in-matt-black","title":"Bathroom Lighting Scheme with a Tunable Mirror Light in Matt Black","description":"\u003cp\u003eA complete scheme: a mirror light that runs 2700K in the evening and 5000K in the morning, which is the one place in a house where a tunable fitting is worth the money.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023117619582,"sku":"BBM-SCH-048-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023117652350,"sku":"BBM-SCH-048-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023117685118,"sku":"BBM-SCH-048-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Tunable_Mirror_Light_in_Matt_Black.jpg?v=1789239659"},{"product_id":"family-bathroom-scheme-with-dimming-throughout-in-polished-chrome","title":"Family Bathroom Scheme with Dimming Throughout in Polished Chrome","description":"\u003cp\u003eA complete scheme: every circuit on a trailing edge dimmer with drivers chosen to dim smoothly to 1 per cent, because most LED bathroom fittings step out at 15 per cent and flicker on the way.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023117750654,"sku":"BBM-SCH-049-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023117783422,"sku":"BBM-SCH-049-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023117816190,"sku":"BBM-SCH-049-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Family_Bathroom_Scheme_with_Dimming_Throughout_in_Polished_Chrome.jpg?v=1789239660"},{"product_id":"family-bathroom-scheme-with-dimming-throughout-in-brushed-chrome","title":"Family Bathroom Scheme with Dimming Throughout in Brushed Chrome","description":"\u003cp\u003eA complete scheme: every circuit on a trailing edge dimmer with drivers chosen to dim smoothly to 1 per cent, because most LED bathroom fittings step out at 15 per cent and flicker on the way.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023117947262,"sku":"BBM-SCH-050-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023117980030,"sku":"BBM-SCH-050-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118012798,"sku":"BBM-SCH-050-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Family_Bathroom_Scheme_with_Dimming_Throughout_in_Brushed_Chrome.jpg?v=1789239654"},{"product_id":"family-bathroom-scheme-with-dimming-throughout-in-matt-black","title":"Family Bathroom Scheme with Dimming Throughout in Matt Black","description":"\u003cp\u003eA complete scheme: every circuit on a trailing edge dimmer with drivers chosen to dim smoothly to 1 per cent, because most LED bathroom fittings step out at 15 per cent and flicker on the way.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023118176638,"sku":"BBM-SCH-052-R8","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023118209406,"sku":"BBM-SCH-052-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118242174,"sku":"BBM-SCH-052-R14","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Family_Bathroom_Scheme_with_Dimming_Throughout_in_Matt_Black.jpg?v=1789239655"},{"product_id":"marine-grade-wet-room-lighting-package-in-brushed-stainless","title":"Marine Grade Wet Room Lighting Package in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless throughout, because a wet room is wet all day and 304 stainless will tea stain in a couple of years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023118799230,"sku":"BBM-WRP-002-27","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023118831998,"sku":"BBM-WRP-002-30","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023118864766,"sku":"BBM-WRP-002-40","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_Wet_Room_Lighting_Package_in_Brushed_Stainless.jpg?v=1789239864"},{"product_id":"wet-room-lighting-package-with-zone-0-floor-lights-in-brushed-stainless","title":"Wet Room Lighting Package with Zone 0 Floor Lights in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: IP67 SELV floor lights inside the shower area itself, running at 12 volts with the transformer outside the zones, which is the only lawful way to put a light there.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 0, which is inside the bath or the shower tray itself. A fitting here must be IP67 and must run at SELV, meaning 12 volts or less with the transformer outside the zones\u003c\/li\u003e\n\u003cli\u003eIP rating: IP67. Dust tight and protected against temporary immersion in up to a metre of water, which is what zone 0 requires and what a fitting in a shower tray or a bath surround has to be\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: SELV, 12 volts, with the transformer sited outside the zones. This is what makes the fitting legal in zone 0 and it is not optional\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119192446,"sku":"BBM-WRP-005-27","price":2924.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119225214,"sku":"BBM-WRP-005-30","price":2924.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119257982,"sku":"BBM-WRP-005-40","price":2924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_Zone_0_Floor_Lights_in_Brushed_Stainless.jpg?v=1789239878"},{"product_id":"steam-room-lighting-package-in-brushed-chrome","title":"Steam Room Lighting Package in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 60 degrees ambient with silicone gaskets rather than nitrile, because a nitrile gasket in a steam room hardens and lets water in within a season.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 60 degrees, which is a steam room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119421822,"sku":"BBM-WRP-007-27","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119454590,"sku":"BBM-WRP-007-30","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119487358,"sku":"BBM-WRP-007-40","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Steam_Room_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239873"},{"product_id":"steam-room-lighting-package-in-brushed-stainless","title":"Steam Room Lighting Package in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 60 degrees ambient with silicone gaskets rather than nitrile, because a nitrile gasket in a steam room hardens and lets water in within a season.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 60 degrees, which is a steam room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119552894,"sku":"BBM-WRP-008-27","price":3549.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119585662,"sku":"BBM-WRP-008-30","price":3549.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119618430,"sku":"BBM-WRP-008-40","price":3549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Steam_Room_Lighting_Package_in_Brushed_Stainless.jpg?v=1789239876"},{"product_id":"steam-room-lighting-package-in-matt-black","title":"Steam Room Lighting Package in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 60 degrees ambient with silicone gaskets rather than nitrile, because a nitrile gasket in a steam room hardens and lets water in within a season.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 60 degrees, which is a steam room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119683966,"sku":"BBM-WRP-009-27","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119716734,"sku":"BBM-WRP-009-30","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119749502,"sku":"BBM-WRP-009-40","price":2424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Steam_Room_Lighting_Package_in_Matt_Black.jpg?v=1789239874"},{"product_id":"wet-room-lighting-package-with-a-recessed-shower-light-in-brushed-stainless","title":"Wet Room Lighting Package with a Recessed Shower Light in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: a flush IP65 light directly over the shower with a tempered glass lens and a captive gasket, so it can be cleaned without dropping the lens.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119946110,"sku":"BBM-WRP-011-27","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119978878,"sku":"BBM-WRP-011-30","price":2699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120011646,"sku":"BBM-WRP-011-40","price":2699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Recessed_Shower_Light_in_Brushed_Stainless.jpg?v=1789239876"},{"product_id":"wet-room-package-with-coloured-mood-lighting-in-brushed-chrome","title":"Wet Room Package with Coloured Mood Lighting in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: an IP67 RGBW tape in the shower recess on a separate SELV driver, which is the one place colour changing light is not a gimmick.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120175486,"sku":"BBM-WRP-013-27","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120208254,"sku":"BBM-WRP-013-30","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120241022,"sku":"BBM-WRP-013-40","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_with_Coloured_Mood_Lighting_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"wet-room-package-with-coloured-mood-lighting-in-brushed-stainless","title":"Wet Room Package with Coloured Mood Lighting in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: an IP67 RGBW tape in the shower recess on a separate SELV driver, which is the one place colour changing light is not a gimmick.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120306558,"sku":"BBM-WRP-014-27","price":3249.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120339326,"sku":"BBM-WRP-014-30","price":3249.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120372094,"sku":"BBM-WRP-014-40","price":3249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_with_Coloured_Mood_Lighting_in_Brushed_Stainless.jpg?v=1789239877"},{"product_id":"wet-room-package-with-coloured-mood-lighting-in-matt-black","title":"Wet Room Package with Coloured Mood Lighting in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: an IP67 RGBW tape in the shower recess on a separate SELV driver, which is the one place colour changing light is not a gimmick.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120437630,"sku":"BBM-WRP-015-27","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120470398,"sku":"BBM-WRP-015-30","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120503166,"sku":"BBM-WRP-015-40","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_with_Coloured_Mood_Lighting_in_Matt_Black.jpg?v=1789239877"},{"product_id":"wet-room-lighting-package-with-a-demisting-mirror-in-brushed-chrome","title":"Wet Room Lighting Package with a Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: a wet room package with a mirror rated for the humidity a wet room actually reaches, which is not the same specification as a bathroom mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120568702,"sku":"BBM-WRP-016-27","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120601470,"sku":"BBM-WRP-016-30","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120634238,"sku":"BBM-WRP-016-40","price":2249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239875"},{"product_id":"wet-room-lighting-package-with-a-demisting-mirror-in-brushed-stainless","title":"Wet Room Lighting Package with a Demisting Mirror in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: a wet room package with a mirror rated for the humidity a wet room actually reaches, which is not the same specification as a bathroom mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120699774,"sku":"BBM-WRP-017-27","price":3399.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120732542,"sku":"BBM-WRP-017-30","price":3399.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120765310,"sku":"BBM-WRP-017-40","price":3399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Demisting_Mirror_in_Brushed_Stainless.jpg?v=1789239876"},{"product_id":"wet-room-lighting-package-with-a-demisting-mirror-in-matt-black","title":"Wet Room Lighting Package with a Demisting Mirror in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: a wet room package with a mirror rated for the humidity a wet room actually reaches, which is not the same specification as a bathroom mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120830846,"sku":"BBM-WRP-018-27","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120863614,"sku":"BBM-WRP-018-30","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120896382,"sku":"BBM-WRP-018-40","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Demisting_Mirror_in_Matt_Black.jpg?v=1789239876"},{"product_id":"sauna-lighting-package-in-brushed-chrome","title":"Sauna Lighting Package in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 125 degrees with ceramic terminal blocks and no plastic in the hot zone, plus a shielded backrest light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 125 degrees on the sauna fittings\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120961918,"sku":"BBM-WRP-019-27","price":2049.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120994686,"sku":"BBM-WRP-019-30","price":2049.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121027454,"sku":"BBM-WRP-019-40","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Sauna_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239876"},{"product_id":"sauna-lighting-package-in-brushed-stainless","title":"Sauna Lighting Package in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 125 degrees with ceramic terminal blocks and no plastic in the hot zone, plus a shielded backrest light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 125 degrees on the sauna fittings\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121125758,"sku":"BBM-WRP-020-27","price":3099.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121158526,"sku":"BBM-WRP-020-30","price":3099.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121191294,"sku":"BBM-WRP-020-40","price":3099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Sauna_Lighting_Package_in_Brushed_Stainless.jpg?v=1789239874"},{"product_id":"sauna-lighting-package-in-matt-black","title":"Sauna Lighting Package in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 125 degrees with ceramic terminal blocks and no plastic in the hot zone, plus a shielded backrest light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 125 degrees on the sauna fittings\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121289598,"sku":"BBM-WRP-021-27","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121322366,"sku":"BBM-WRP-021-30","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121355134,"sku":"BBM-WRP-021-40","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Sauna_Lighting_Package_in_Matt_Black.jpg?v=1789239870"},{"product_id":"wet-room-package-for-a-coastal-house-in-brushed-chrome","title":"Wet Room Package for a Coastal House in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless, marine grade gaskets and a salt spray tested finish to BS EN ISO 9227, for a house within a mile of the sea where ordinary chrome pits inside two winters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121420670,"sku":"BBM-WRP-022-27","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121453438,"sku":"BBM-WRP-022-30","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121486206,"sku":"BBM-WRP-022-40","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_for_a_Coastal_House_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"wet-room-package-for-a-coastal-house-in-brushed-stainless","title":"Wet Room Package for a Coastal House in Brushed Stainless","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless, marine grade gaskets and a salt spray tested finish to BS EN ISO 9227, for a house within a mile of the sea where ordinary chrome pits inside two winters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: marine grade 316 stainless, not the 304 that most of the trade uses. In a wet room or a coastal house 304 will tea stain within a couple of years and 316 will not\u003c\/li\u003e\n\u003cli\u003eCorrosion: 316 marine grade stainless, salt spray tested to 1000 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121551742,"sku":"BBM-WRP-023-27","price":3324.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121584510,"sku":"BBM-WRP-023-30","price":3324.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121617278,"sku":"BBM-WRP-023-40","price":3324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_for_a_Coastal_House_in_Brushed_Stainless.jpg?v=1789239877"},{"product_id":"wet-room-package-for-a-coastal-house-in-matt-black","title":"Wet Room Package for a Coastal House in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless, marine grade gaskets and a salt spray tested finish to BS EN ISO 9227, for a house within a mile of the sea where ordinary chrome pits inside two winters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121650046,"sku":"BBM-WRP-024-27","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121682814,"sku":"BBM-WRP-024-30","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121715582,"sku":"BBM-WRP-024-40","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_for_a_Coastal_House_in_Matt_Black.jpg?v=1789239876"},{"product_id":"wet-room-lighting-package-with-an-extract-system-in-brushed-chrome","title":"Wet Room Lighting Package with an Extract System in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: the lights and a continuous running extract unit specified together, sized to the room volume, because a wet room without proper extract destroys its own ceiling.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121781118,"sku":"BBM-WRP-025-27","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121813886,"sku":"BBM-WRP-025-30","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121846654,"sku":"BBM-WRP-025-40","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_an_Extract_System_in_Brushed_Chrome.jpg?v=1789239875"}],"url":"https:\/\/batheandbeam.com\/collections\/over-2000-pounds.oembed?page=4","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}