{"title":"Not Fire Rated — Hood Required","description":"\u003cp\u003eThese fittings are not fire rated. In a ground-floor ceiling with nothing habitable above, that is fine. Under an occupied room or a loft, fit a fire hood in the void above each one — we sell those on the \u003ca href=\"\/collections\/seals\"\u003eseals and connectors\u003c\/a\u003e page.\u003c\/p\u003e","products":[{"product_id":"complete-bathroom-lighting-scheme-in-polished-chrome","title":"Complete Bathroom Lighting Scheme in Polished Chrome","description":"\u003cp\u003eA complete scheme: six IP65 downlights, a mirror light, a shaver socket and the drivers and dimmer to run them, specified as one circuit rather than bought as seven separate guesses.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023065846142,"sku":"BBM-SCH-001-R8","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023065878910,"sku":"BBM-SCH-001-R4","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023065911678,"sku":"BBM-SCH-001-R14","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Complete_Bathroom_Lighting_Scheme_in_Polished_Chrome.jpg?v=1789239657"},{"product_id":"complete-bathroom-lighting-scheme-in-brushed-chrome","title":"Complete Bathroom Lighting Scheme in Brushed Chrome","description":"\u003cp\u003eA complete scheme: six IP65 downlights, a mirror light, a shaver socket and the drivers and dimmer to run them, specified as one circuit rather than bought as seven separate guesses.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023065977214,"sku":"BBM-SCH-002-R8","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023066009982,"sku":"BBM-SCH-002-R4","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023066042750,"sku":"BBM-SCH-002-R14","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Complete_Bathroom_Lighting_Scheme_in_Brushed_Chrome.jpg?v=1789239659"},{"product_id":"complete-bathroom-lighting-scheme-in-matt-black","title":"Complete Bathroom Lighting Scheme in Matt Black","description":"\u003cp\u003eA complete scheme: six IP65 downlights, a mirror light, a shaver socket and the drivers and dimmer to run them, specified as one circuit rather than bought as seven separate guesses.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023066239358,"sku":"BBM-SCH-004-R8","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023066272126,"sku":"BBM-SCH-004-R4","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023066304894,"sku":"BBM-SCH-004-R14","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Complete_Bathroom_Lighting_Scheme_in_Matt_Black.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-polished-chrome","title":"Bathroom Lighting Scheme with a Demisting Mirror in Polished Chrome","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023066435966,"sku":"BBM-SCH-005-R8","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023066468734,"sku":"BBM-SCH-005-R4","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023066501502,"sku":"BBM-SCH-005-R14","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Polished_Chrome.jpg?v=1789239658"},{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023069679998,"sku":"BBM-SCH-006-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023069712766,"sku":"BBM-SCH-006-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023069745534,"sku":"BBM-SCH-006-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-matt-white","title":"Bathroom Lighting Scheme with a Demisting Mirror in Matt White","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.0 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023072825726,"sku":"BBM-SCH-007-R8","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023072858494,"sku":"BBM-SCH-007-R4","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023072891262,"sku":"BBM-SCH-007-R14","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Matt_White.jpg?v=1789239654"},{"product_id":"bathroom-lighting-scheme-with-a-demisting-mirror-in-matt-black","title":"Bathroom Lighting Scheme with a Demisting Mirror in Matt Black","description":"\u003cp\u003eA complete scheme: the same scheme with a front lit demisting mirror in place of the mirror light, which is the version most people actually want once they understand the difference.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023072956798,"sku":"BBM-SCH-008-R8","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023072989566,"sku":"BBM-SCH-008-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023073022334,"sku":"BBM-SCH-008-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Demisting_Mirror_in_Matt_Black.jpg?v=1789239659"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-polished-chrome","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Polished Chrome","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023073087870,"sku":"BBM-SCH-009-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023073120638,"sku":"BBM-SCH-009-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023073153406,"sku":"BBM-SCH-009-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Polished_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023073251710,"sku":"BBM-SCH-010-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023073284478,"sku":"BBM-SCH-010-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023073317246,"sku":"BBM-SCH-010-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Brushed_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-matt-white","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Matt White","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023074333054,"sku":"BBM-SCH-011-R8","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023074365822,"sku":"BBM-SCH-011-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023074398590,"sku":"BBM-SCH-011-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Matt_White.jpg?v=1789239655"},{"product_id":"bathroom-lighting-scheme-with-a-mirror-cabinet-in-matt-black","title":"Bathroom Lighting Scheme with a Mirror Cabinet in Matt Black","description":"\u003cp\u003eA complete scheme: the scheme built around an illuminated mirror cabinet, so the storage and the task light are the same purchase.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023076987262,"sku":"BBM-SCH-012-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023077020030,"sku":"BBM-SCH-012-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023077052798,"sku":"BBM-SCH-012-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Mirror_Cabinet_in_Matt_Black.jpg?v=1789239644"},{"product_id":"en-suite-lighting-scheme-in-polished-chrome","title":"En Suite Lighting Scheme in Polished Chrome","description":"\u003cp\u003eA complete scheme: four downlights, a mirror light and a shaver socket, sized for a room under four square metres where six downlights would be glare rather than light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 4 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 2600 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023078101374,"sku":"BBM-SCH-013-R8","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023078134142,"sku":"BBM-SCH-013-R4","price":919.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023078166910,"sku":"BBM-SCH-013-R14","price":1424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/En_Suite_Lighting_Scheme_in_Polished_Chrome.jpg?v=1789239648"},{"product_id":"en-suite-lighting-scheme-in-brushed-chrome","title":"En Suite Lighting Scheme in Brushed Chrome","description":"\u003cp\u003eA complete scheme: four downlights, a mirror light and a shaver socket, sized for a room under four square metres where six downlights would be glare rather than light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 4 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 2600 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023078232446,"sku":"BBM-SCH-014-R8","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023078265214,"sku":"BBM-SCH-014-R4","price":949.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023078297982,"sku":"BBM-SCH-014-R14","price":1474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/En_Suite_Lighting_Scheme_in_Brushed_Chrome.jpg?v=1789239653"},{"product_id":"en-suite-lighting-scheme-in-matt-white","title":"En Suite Lighting Scheme in Matt White","description":"\u003cp\u003eA complete scheme: four downlights, a mirror light and a shaver socket, sized for a room under four square metres where six downlights would be glare rather than light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 4 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 2600 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.1 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023079182718,"sku":"BBM-SCH-015-R8","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023079215486,"sku":"BBM-SCH-015-R4","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023079248254,"sku":"BBM-SCH-015-R14","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/En_Suite_Lighting_Scheme_in_Matt_White.jpg?v=1789239644"},{"product_id":"en-suite-lighting-scheme-in-matt-black","title":"En Suite Lighting Scheme in Matt Black","description":"\u003cp\u003eA complete scheme: four downlights, a mirror light and a shaver socket, sized for a room under four square metres where six downlights would be glare rather than light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 4 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 2600 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023079575934,"sku":"BBM-SCH-016-R8","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023079608702,"sku":"BBM-SCH-016-R4","price":969.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023079641470,"sku":"BBM-SCH-016-R14","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/En_Suite_Lighting_Scheme_in_Matt_Black.jpg?v=1789239658"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-polished-chrome","title":"Bathroom Lighting Scheme with Layered Light in Polished Chrome","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023081410942,"sku":"BBM-SCH-017-R8","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023081443710,"sku":"BBM-SCH-017-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023081476478,"sku":"BBM-SCH-017-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Polished_Chrome.jpg?v=1789239652"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-brushed-chrome","title":"Bathroom Lighting Scheme with Layered Light in Brushed Chrome","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023081673086,"sku":"BBM-SCH-018-R8","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023081705854,"sku":"BBM-SCH-018-R4","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023081738622,"sku":"BBM-SCH-018-R14","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Brushed_Chrome.jpg?v=1789239655"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-matt-white","title":"Bathroom Lighting Scheme with Layered Light in Matt White","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.5 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023081804158,"sku":"BBM-SCH-019-R8","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023081836926,"sku":"BBM-SCH-019-R4","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023081869694,"sku":"BBM-SCH-019-R14","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Matt_White.jpg?v=1789239653"},{"product_id":"bathroom-lighting-scheme-with-layered-light-in-matt-black","title":"Bathroom Lighting Scheme with Layered Light in Matt Black","description":"\u003cp\u003eA complete scheme: three circuits rather than one: downlights for cleaning, a mirror light for the face and a low level night circuit, which is the arrangement that stops a bathroom being a surgery at two in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: three, on separate switches\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023082099070,"sku":"BBM-SCH-020-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023082131838,"sku":"BBM-SCH-020-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023082164606,"sku":"BBM-SCH-020-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Layered_Light_in_Matt_Black.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-a-night-circuit-in-polished-chrome","title":"Bathroom Lighting Scheme with a Night Circuit in Polished Chrome","description":"\u003cp\u003eA complete scheme: the standard scheme plus a floor level circuit on its own switch at 1 lux, so nobody has to turn the main light on at three in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: two, with the night circuit on its own switch\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023082656126,"sku":"BBM-SCH-021-R8","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023082688894,"sku":"BBM-SCH-021-R4","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023082721662,"sku":"BBM-SCH-021-R14","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Night_Circuit_in_Polished_Chrome.jpg?v=1789239654"},{"product_id":"bathroom-lighting-scheme-with-a-night-circuit-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Night Circuit in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the standard scheme plus a floor level circuit on its own switch at 1 lux, so nobody has to turn the main light on at three in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: two, with the night circuit on its own switch\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023086358910,"sku":"BBM-SCH-022-R8","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023086391678,"sku":"BBM-SCH-022-R4","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023086424446,"sku":"BBM-SCH-022-R14","price":1874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Night_Circuit_in_Brushed_Chrome.jpg?v=1789239635"},{"product_id":"bathroom-lighting-scheme-with-a-night-circuit-in-matt-white","title":"Bathroom Lighting Scheme with a Night Circuit in Matt White","description":"\u003cp\u003eA complete scheme: the standard scheme plus a floor level circuit on its own switch at 1 lux, so nobody has to turn the main light on at three in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: two, with the night circuit on its own switch\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023086555518,"sku":"BBM-SCH-023-R8","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023086588286,"sku":"BBM-SCH-023-R4","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023086621054,"sku":"BBM-SCH-023-R14","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Night_Circuit_in_Matt_White.jpg?v=1789239644"},{"product_id":"bathroom-lighting-scheme-with-a-night-circuit-in-matt-black","title":"Bathroom Lighting Scheme with a Night Circuit in Matt Black","description":"\u003cp\u003eA complete scheme: the standard scheme plus a floor level circuit on its own switch at 1 lux, so nobody has to turn the main light on at three in the morning.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: two, with the night circuit on its own switch\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023087735166,"sku":"BBM-SCH-024-R8","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023087767934,"sku":"BBM-SCH-024-R4","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023087800702,"sku":"BBM-SCH-024-R14","price":1924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Night_Circuit_in_Matt_Black.jpg?v=1789239652"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-polished-chrome","title":"Bathroom Lighting Scheme with a Feature Pendant in Polished Chrome","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023093240190,"sku":"BBM-SCH-029-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023093272958,"sku":"BBM-SCH-029-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023093305726,"sku":"BBM-SCH-029-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Polished_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Feature Pendant in Brushed Chrome","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023095337342,"sku":"BBM-SCH-030-R8","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023095370110,"sku":"BBM-SCH-030-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023095402878,"sku":"BBM-SCH-030-R14","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Brushed_Chrome.jpg?v=1789239658"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-matt-white","title":"Bathroom Lighting Scheme with a Feature Pendant in Matt White","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.9 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023095468414,"sku":"BBM-SCH-031-R8","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023095501182,"sku":"BBM-SCH-031-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023095533950,"sku":"BBM-SCH-031-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Matt_White.jpg?v=1789239638"},{"product_id":"bathroom-lighting-scheme-with-a-feature-pendant-in-matt-black","title":"Bathroom Lighting Scheme with a Feature Pendant in Matt Black","description":"\u003cp\u003eA complete scheme: a scheme built around an IP44 rated pendant over the bath, with the downlights taking a supporting role rather than doing all the work.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023095697790,"sku":"BBM-SCH-032-R8","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023095730558,"sku":"BBM-SCH-032-R4","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023095763326,"sku":"BBM-SCH-032-R14","price":2599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Feature_Pendant_in_Matt_Black.jpg?v=1789239654"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-polished-chrome","title":"Bathroom Lighting Scheme with Cove Lighting in Polished Chrome","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023097762174,"sku":"BBM-SCH-033-R8","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023097794942,"sku":"BBM-SCH-033-R4","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023097827710,"sku":"BBM-SCH-033-R14","price":2724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Polished_Chrome.jpg?v=1789239661"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-brushed-chrome","title":"Bathroom Lighting Scheme with Cove Lighting in Brushed Chrome","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023099531646,"sku":"BBM-SCH-034-R8","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023099564414,"sku":"BBM-SCH-034-R4","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023099597182,"sku":"BBM-SCH-034-R14","price":2799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Brushed_Chrome.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-matt-white","title":"Bathroom Lighting Scheme with Cove Lighting in Matt White","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.1 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023101464958,"sku":"BBM-SCH-035-R8","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023101497726,"sku":"BBM-SCH-035-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023101530494,"sku":"BBM-SCH-035-R14","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Matt_White.jpg?v=1789239661"},{"product_id":"bathroom-lighting-scheme-with-cove-lighting-in-matt-black","title":"Bathroom Lighting Scheme with Cove Lighting in Matt Black","description":"\u003cp\u003eA complete scheme: an IP65 tape run in a cove or a shadow gap, with the downlights and the mirror light specified around it and every driver sized with 20 per cent headroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023101596030,"sku":"BBM-SCH-036-R8","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023101628798,"sku":"BBM-SCH-036-R4","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023101661566,"sku":"BBM-SCH-036-R14","price":2874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_Cove_Lighting_in_Matt_Black.jpg?v=1789239644"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-polished-chrome","title":"Bathroom Lighting Scheme for a High Ceiling in Polished Chrome","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023101956478,"sku":"BBM-SCH-037-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023101989246,"sku":"BBM-SCH-037-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023102022014,"sku":"BBM-SCH-037-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Polished_Chrome.jpg?v=1789239648"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-brushed-chrome","title":"Bathroom Lighting Scheme for a High Ceiling in Brushed Chrome","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023104315774,"sku":"BBM-SCH-038-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023104348542,"sku":"BBM-SCH-038-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023104381310,"sku":"BBM-SCH-038-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Brushed_Chrome.jpg?v=1789239656"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-matt-white","title":"Bathroom Lighting Scheme for a High Ceiling in Matt White","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.3 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023107395966,"sku":"BBM-SCH-039-R8","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023107428734,"sku":"BBM-SCH-039-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023107461502,"sku":"BBM-SCH-039-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Matt_White.jpg?v=1789239645"},{"product_id":"bathroom-lighting-scheme-for-a-high-ceiling-in-matt-black","title":"Bathroom Lighting Scheme for a High Ceiling in Matt Black","description":"\u003cp\u003eA complete scheme: eight downlights with a narrower beam angle, because a 45 degree beam from a three metre ceiling lands as pools and gaps rather than as light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 5200 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023109230974,"sku":"BBM-SCH-040-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023109263742,"sku":"BBM-SCH-040-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023109296510,"sku":"BBM-SCH-040-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_for_a_High_Ceiling_in_Matt_Black.jpg?v=1789239650"},{"product_id":"bathroom-lighting-scheme-with-an-extractor-fan-in-polished-chrome","title":"Bathroom Lighting Scheme with an Extractor Fan in Polished Chrome","description":"\u003cp\u003eA complete scheme: the fan and the lights specified together with the fan on an overrun timer and the extract rate matched to the room volume, which is what building regulations ask for and almost nobody calculates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023109362046,"sku":"BBM-SCH-041-R8","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023109394814,"sku":"BBM-SCH-041-R4","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023109427582,"sku":"BBM-SCH-041-R14","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_an_Extractor_Fan_in_Polished_Chrome.jpg?v=1789239661"},{"product_id":"bathroom-lighting-scheme-with-an-extractor-fan-in-brushed-chrome","title":"Bathroom Lighting Scheme with an Extractor Fan in Brushed Chrome","description":"\u003cp\u003eA complete scheme: the fan and the lights specified together with the fan on an overrun timer and the extract rate matched to the room volume, which is what building regulations ask for and almost nobody calculates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023110148478,"sku":"BBM-SCH-042-R8","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023110181246,"sku":"BBM-SCH-042-R4","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023110214014,"sku":"BBM-SCH-042-R14","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_an_Extractor_Fan_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-an-extractor-fan-in-matt-white","title":"Bathroom Lighting Scheme with an Extractor Fan in Matt White","description":"\u003cp\u003eA complete scheme: the fan and the lights specified together with the fan on an overrun timer and the extract rate matched to the room volume, which is what building regulations ask for and almost nobody calculates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.5 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023111655806,"sku":"BBM-SCH-043-R8","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023111688574,"sku":"BBM-SCH-043-R4","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023111721342,"sku":"BBM-SCH-043-R14","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_an_Extractor_Fan_in_Matt_White.jpg?v=1789239660"},{"product_id":"bathroom-lighting-scheme-with-an-extractor-fan-in-matt-black","title":"Bathroom Lighting Scheme with an Extractor Fan in Matt Black","description":"\u003cp\u003eA complete scheme: the fan and the lights specified together with the fan on an overrun timer and the extract rate matched to the room volume, which is what building regulations ask for and almost nobody calculates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023112606078,"sku":"BBM-SCH-044-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023112638846,"sku":"BBM-SCH-044-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023112671614,"sku":"BBM-SCH-044-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_an_Extractor_Fan_in_Matt_Black.jpg?v=1789239659"},{"product_id":"bathroom-lighting-scheme-with-a-tunable-mirror-light-in-brushed-chrome","title":"Bathroom Lighting Scheme with a Tunable Mirror Light in Brushed Chrome","description":"\u003cp\u003eA complete scheme: a mirror light that runs 2700K in the evening and 5000K in the morning, which is the one place in a house where a tunable fitting is worth the money.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023113949566,"sku":"BBM-SCH-046-R8","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023113982334,"sku":"BBM-SCH-046-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023114015102,"sku":"BBM-SCH-046-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Tunable_Mirror_Light_in_Brushed_Chrome.jpg?v=1789239659"},{"product_id":"bathroom-lighting-scheme-with-a-tunable-mirror-light-in-matt-white","title":"Bathroom Lighting Scheme with a Tunable Mirror Light in Matt White","description":"\u003cp\u003eA complete scheme: a mirror light that runs 2700K in the evening and 5000K in the morning, which is the one place in a house where a tunable fitting is worth the money.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.0 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023116505470,"sku":"BBM-SCH-047-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023116538238,"sku":"BBM-SCH-047-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023116571006,"sku":"BBM-SCH-047-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Tunable_Mirror_Light_in_Matt_White.jpg?v=1789239657"},{"product_id":"bathroom-lighting-scheme-with-a-tunable-mirror-light-in-matt-black","title":"Bathroom Lighting Scheme with a Tunable Mirror Light in Matt Black","description":"\u003cp\u003eA complete scheme: a mirror light that runs 2700K in the evening and 5000K in the morning, which is the one place in a house where a tunable fitting is worth the money.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023117619582,"sku":"BBM-SCH-048-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023117652350,"sku":"BBM-SCH-048-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023117685118,"sku":"BBM-SCH-048-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Lighting_Scheme_with_a_Tunable_Mirror_Light_in_Matt_Black.jpg?v=1789239659"},{"product_id":"family-bathroom-scheme-with-dimming-throughout-in-polished-chrome","title":"Family Bathroom Scheme with Dimming Throughout in Polished Chrome","description":"\u003cp\u003eA complete scheme: every circuit on a trailing edge dimmer with drivers chosen to dim smoothly to 1 per cent, because most LED bathroom fittings step out at 15 per cent and flicker on the way.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023117750654,"sku":"BBM-SCH-049-R8","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023117783422,"sku":"BBM-SCH-049-R4","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023117816190,"sku":"BBM-SCH-049-R14","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Family_Bathroom_Scheme_with_Dimming_Throughout_in_Polished_Chrome.jpg?v=1789239660"},{"product_id":"family-bathroom-scheme-with-dimming-throughout-in-brushed-chrome","title":"Family Bathroom Scheme with Dimming Throughout in Brushed Chrome","description":"\u003cp\u003eA complete scheme: every circuit on a trailing edge dimmer with drivers chosen to dim smoothly to 1 per cent, because most LED bathroom fittings step out at 15 per cent and flicker on the way.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023117947262,"sku":"BBM-SCH-050-R8","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023117980030,"sku":"BBM-SCH-050-R4","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118012798,"sku":"BBM-SCH-050-R14","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Family_Bathroom_Scheme_with_Dimming_Throughout_in_Brushed_Chrome.jpg?v=1789239654"},{"product_id":"family-bathroom-scheme-with-dimming-throughout-in-matt-black","title":"Family Bathroom Scheme with Dimming Throughout in Matt Black","description":"\u003cp\u003eA complete scheme: every circuit on a trailing edge dimmer with drivers chosen to dim smoothly to 1 per cent, because most LED bathroom fittings step out at 15 per cent and flicker on the way.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 6 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 3900 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023118176638,"sku":"BBM-SCH-052-R8","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023118209406,"sku":"BBM-SCH-052-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118242174,"sku":"BBM-SCH-052-R14","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Family_Bathroom_Scheme_with_Dimming_Throughout_in_Matt_Black.jpg?v=1789239655"},{"product_id":"cloakroom-lighting-scheme-in-polished-chrome","title":"Cloakroom Lighting Scheme in Polished Chrome","description":"\u003cp\u003eA complete scheme: three downlights and a mirror light for a cloakroom, where there is usually no bath or shower and therefore no zone at all, which changes what you may fit.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 3 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 1950 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: triple plated polished chrome over brass, which is the finish that survives a bathroom because the copper and nickel layers underneath are what actually stop corrosion\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023118307710,"sku":"BBM-SCH-053-R8","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023118340478,"sku":"BBM-SCH-053-R4","price":879.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118373246,"sku":"BBM-SCH-053-R14","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Cloakroom_Lighting_Scheme_in_Polished_Chrome.jpg?v=1789239648"},{"product_id":"cloakroom-lighting-scheme-in-brushed-chrome","title":"Cloakroom Lighting Scheme in Brushed Chrome","description":"\u003cp\u003eA complete scheme: three downlights and a mirror light for a cloakroom, where there is usually no bath or shower and therefore no zone at all, which changes what you may fit.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 3 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 1950 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023118438782,"sku":"BBM-SCH-054-R8","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023118471550,"sku":"BBM-SCH-054-R4","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118504318,"sku":"BBM-SCH-054-R14","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Cloakroom_Lighting_Scheme_in_Brushed_Chrome.jpg?v=1789239651"},{"product_id":"cloakroom-lighting-scheme-in-matt-black","title":"Cloakroom Lighting Scheme in Matt Black","description":"\u003cp\u003eA complete scheme: three downlights and a mirror light for a cloakroom, where there is usually no bath or shower and therefore no zone at all, which changes what you may fit.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower. Every fitting in this scheme that can go in zone 1 is IP65 and the ones that cannot are marked in the pack list\u003c\/li\u003e\n\u003cli\u003eDimensions: 3 downlights at 85mm cut out, plus the mirror light and the accessories listed below\u003c\/li\u003e\n\u003cli\u003eLight output: 1950 lumens total at 88 lumens per circuit watt, which meets the Part L figure of 75 with headroom\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and the whole scheme is supplied at one colour temperature because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable on a trailing edge dimmer, supplied, and every driver in the scheme is from the same family so they dim together rather than in steps\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.4 kilograms for the whole scheme\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eScheme drawing: a reflected ceiling plan showing every fitting position dimensioned from the walls, supplied as a PDF with the order\u003c\/li\u003e\n\u003cli\u003eCircuits: one\u003c\/li\u003e\n\u003cli\u003eSaving: about 15 per cent against the same fittings bought individually\u003c\/li\u003e\n\u003cli\u003eEfficacy: quoted in lumens per circuit watt, including driver losses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 IP65 downlights with integral drivers\u003c\/li\u003e\n\u003cli\u003ethe mirror light or mirror as listed\u003c\/li\u003e\n\u003cli\u003ea shaver socket to BS EN 61558-2-5\u003c\/li\u003e\n\u003cli\u003ea trailing edge dimmer matched to the drivers\u003c\/li\u003e\n\u003cli\u003eIP65 connector blocks and cable glands\u003c\/li\u003e\n\u003cli\u003ea reflected ceiling plan dimensioned to your room\u003c\/li\u003e\n\u003cli\u003ea zone drawing showing where each fitting may and may not go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, most of a day. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The scheme arrives with a reflected ceiling plan dimensioned from the walls rather than a suggestion to space them evenly, because evenly spaced downlights in a bathroom put a light directly over the person at the basin and none on their face.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe case for buying a scheme rather than seven fittings is not the 15 per cent. It is that the colour temperatures match, the drivers come from one family so they dim together, the total load is inside the dimmer's rating, and somebody has worked out where the fittings go relative to the basin and the bath rather than relative to the ceiling. Those four things are what make a bathroom look lit rather than illuminated, and none of them survive buying by the item.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023118569854,"sku":"BBM-SCH-055-R8","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023118602622,"sku":"BBM-SCH-055-R4","price":929.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023118635390,"sku":"BBM-SCH-055-R14","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Cloakroom_Lighting_Scheme_in_Matt_Black.jpg?v=1789239651"},{"product_id":"slim-ip65-downlight-at-25mm-deep-in-matt-white","title":"Slim IP65 Downlight at 25mm Deep in Matt White","description":"\u003cp\u003eA downlight for a bathroom: 25mm above the ceiling with a remote driver, for a concrete soffit or a void that does not exist.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 40mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 580 lumens at 84 lumens per circuit watt, 110 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.29 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 40mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 110 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152714110,"sku":"BBM-DWN-037-27","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152746878,"sku":"BBM-DWN-037-30","price":38.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152779646,"sku":"BBM-DWN-037-40","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_IP65_Downlight_at_25mm_Deep_in_Matt_White.jpg?v=1789239869"},{"product_id":"slim-ip65-downlight-at-25mm-deep-in-brushed-chrome","title":"Slim IP65 Downlight at 25mm Deep in Brushed Chrome","description":"\u003cp\u003eA downlight for a bathroom: 25mm above the ceiling with a remote driver, for a concrete soffit or a void that does not exist.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 85mm cut out, 92mm overall, 40mm insertion depth above the ceiling\u003c\/li\u003e\n\u003cli\u003eLight output: 580 lumens at 84 lumens per circuit watt, 110 degree beam. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge, to 1 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 with a remote driver on a 2 metre lead, which has to be accessible for maintenance. Plan a hatch or place it in the loft, because a driver buried in a sealed void is a fault waiting to happen\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eInsulation: must not be covered. This fitting is not fire rated and needs a hood in a fire compartment ceiling\u003c\/li\u003e\n\u003cli\u003eInsertion depth: 40mm, and this is the figure that decides whether it fits your joist void\u003c\/li\u003e\n\u003cli\u003eBeam angle: 110 degrees\u003c\/li\u003e\n\u003cli\u003eGasket: silicone, captive, replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe downlight with its driver and flex tail\u003c\/li\u003e\n\u003cli\u003ean IP65 push fit connector\u003c\/li\u003e\n\u003cli\u003ea spare gasket\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003etest certificates by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Check the insertion depth against your void before cutting, and lay the cut outs out from the basin and the bath rather than evenly across the ceiling, because an evenly spaced grid reliably puts a light directly behind the person using the mirror.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree specifications decide a bathroom downlight and only one of them is usually printed on the box. IP65 rather than IP44 if it is going in zone 1, which is over the bath or in the shower. Fire rated if the ceiling is a fire compartment, which it is in every flat. And beam angle, which should be narrow for a high ceiling and wide for a low one. Lumens matter far less than any of those, and colour rendering matters more than lumens.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023152812414,"sku":"BBM-DWN-038-27","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023152845182,"sku":"BBM-DWN-038-30","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023152877950,"sku":"BBM-DWN-038-40","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_IP65_Downlight_at_25mm_Deep_in_Brushed_Chrome.jpg?v=1789239872"}],"url":"https:\/\/batheandbeam.com\/collections\/not-fire-rated.oembed?page=2","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}