{"title":"Illuminated Mirrors","description":"\u003cp\u003eFront lit, backlit, or both, with or without a demister. One warning before you choose: a backlit mirror lights the wall, not your face. The lux figures are side by side on \u003ca href=\"\/pages\/front-lit-or-backlit\"\u003efront lit or backlit\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"front-lit-demisting-mirror-in-brushed-chrome","title":"Front Lit Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126696318,"sku":"BBM-LDM-001-M68","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126729086,"sku":"BBM-LDM-001-M88","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023126761854,"sku":"BBM-LDM-001-M108","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"front-lit-demisting-mirror-in-matt-black","title":"Front Lit Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126827390,"sku":"BBM-LDM-002-M68","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126860158,"sku":"BBM-LDM-002-M88","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023126892926,"sku":"BBM-LDM-002-M108","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Matt_Black.jpg?v=1789239741"},{"product_id":"front-lit-demisting-mirror-in-brushed-brass","title":"Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126958462,"sku":"BBM-LDM-003-M68","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126991230,"sku":"BBM-LDM-003-M88","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127023998,"sku":"BBM-LDM-003-M108","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239742"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-chrome","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127089534,"sku":"BBM-LDM-004-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127122302,"sku":"BBM-LDM-004-M88","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127155070,"sku":"BBM-LDM-004-M108","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Chrome.jpg?v=1789239743"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-brass","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127351678,"sku":"BBM-LDM-006-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127384446,"sku":"BBM-LDM-006-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127417214,"sku":"BBM-LDM-006-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Brass.jpg?v=1789239740"},{"product_id":"demisting-mirror-with-front-and-ambient-lighting-in-matt-black","title":"Demisting Mirror with Front and Ambient Lighting in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a front lit panel for the face and a separate halo for the room, on two switches.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127613822,"sku":"BBM-LDM-008-M68","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127646590,"sku":"BBM-LDM-008-M88","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127679358,"sku":"BBM-LDM-008-M108","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_Front_and_Ambient_Lighting_in_Matt_Black.jpg?v=1789239659"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-chrome","title":"Round Front Lit Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127875966,"sku":"BBM-LDM-010-M68","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127908734,"sku":"BBM-LDM-010-M88","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127941502,"sku":"BBM-LDM-010-M108","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239868"},{"product_id":"round-front-lit-demisting-mirror-in-matt-black","title":"Round Front Lit Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127974270,"sku":"BBM-LDM-011-M68","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128007038,"sku":"BBM-LDM-011-M88","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128039806,"sku":"BBM-LDM-011-M108","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Matt_Black.jpg?v=1789239867"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-brass","title":"Round Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128105342,"sku":"BBM-LDM-012-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128138110,"sku":"BBM-LDM-012-M88","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128170878,"sku":"BBM-LDM-012-M108","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239868"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-chrome","title":"Demisting Mirror with a Magnifying Insert in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128236414,"sku":"BBM-LDM-013-M68","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128269182,"sku":"BBM-LDM-013-M88","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128301950,"sku":"BBM-LDM-013-M108","price":1924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-brass","title":"Demisting Mirror with a Magnifying Insert in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128629630,"sku":"BBM-LDM-015-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128662398,"sku":"BBM-LDM-015-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128695166,"sku":"BBM-LDM-015-M108","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Brass.jpg?v=1789239654"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-chrome","title":"Landscape Demisting Mirror for Two Basins in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128826238,"sku":"BBM-LDM-016-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128859006,"sku":"BBM-LDM-016-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128891774,"sku":"BBM-LDM-016-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-matt-black","title":"Landscape Demisting Mirror for Two Basins in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128957310,"sku":"BBM-LDM-017-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128990078,"sku":"BBM-LDM-017-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129022846,"sku":"BBM-LDM-017-M108","price":2424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Matt_Black.jpg?v=1789239875"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-brass","title":"Landscape Demisting Mirror for Two Basins in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129088382,"sku":"BBM-LDM-018-M68","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129121150,"sku":"BBM-LDM-018-M88","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129153918,"sku":"BBM-LDM-018-M108","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Brass.jpg?v=1789239866"},{"product_id":"demisting-mirror-with-a-clock-and-temperature-display-in-matt-black","title":"Demisting Mirror with a Clock and Temperature Display in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a discreet display in the corner of the glass, which is either the best or the worst thing in this shop depending entirely on who you are.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129317758,"sku":"BBM-LDM-020-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129350526,"sku":"BBM-LDM-020-M88","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129383294,"sku":"BBM-LDM-020-M108","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Clock_and_Temperature_Display_in_Matt_Black.jpg?v=1789239659"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-chrome","title":"Demisting Mirror with a Metal Frame in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129645438,"sku":"BBM-LDM-022-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129678206,"sku":"BBM-LDM-022-M88","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129710974,"sku":"BBM-LDM-022-M108","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Chrome.jpg?v=1789239659"},{"product_id":"demisting-mirror-with-a-metal-frame-in-matt-black","title":"Demisting Mirror with a Metal Frame in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129776510,"sku":"BBM-LDM-023-M68","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129809278,"sku":"BBM-LDM-023-M88","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129842046,"sku":"BBM-LDM-023-M108","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Matt_Black.jpg?v=1789239658"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-brass","title":"Demisting Mirror with a Metal Frame in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129907582,"sku":"BBM-LDM-024-M68","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129940350,"sku":"BBM-LDM-024-M88","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129973118,"sku":"BBM-LDM-024-M108","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Brass.jpg?v=1789239652"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-matt-black","title":"Demisting Mirror with a Shaver Socket in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130169726,"sku":"BBM-LDM-026-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130202494,"sku":"BBM-LDM-026-M88","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130235262,"sku":"BBM-LDM-026-M108","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239661"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-brushed-brass","title":"Demisting Mirror with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130300798,"sku":"BBM-LDM-027-M68","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130333566,"sku":"BBM-LDM-027-M88","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130366334,"sku":"BBM-LDM-027-M108","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239657"},{"product_id":"full-height-demisting-mirror-in-brushed-chrome","title":"Full Height Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130464638,"sku":"BBM-LDM-028-M68","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130497406,"sku":"BBM-LDM-028-M88","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130530174,"sku":"BBM-LDM-028-M108","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239740"},{"product_id":"full-height-demisting-mirror-in-matt-black","title":"Full Height Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130857854,"sku":"BBM-LDM-029-M68","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130890622,"sku":"BBM-LDM-029-M88","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130923390,"sku":"BBM-LDM-029-M108","price":2574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Matt_Black.jpg?v=1789239735"},{"product_id":"full-height-demisting-mirror-in-brushed-brass","title":"Full Height Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 36.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130988926,"sku":"BBM-LDM-030-M68","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023131021694,"sku":"BBM-LDM-030-M88","price":2724.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023131054462,"sku":"BBM-LDM-030-M108","price":3224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239741"},{"product_id":"front-lit-illuminated-mirror-in-brushed-chrome","title":"Front Lit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: the plain front lit mirror, with lit panels at face height and no demister.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023161823614,"sku":"BBM-MIR-001-M68","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023161856382,"sku":"BBM-MIR-001-M57","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023161889150,"sku":"BBM-MIR-001-M88","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023161921918,"sku":"BBM-MIR-001-M108","price":359.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239744"},{"product_id":"front-lit-illuminated-mirror-in-matt-black","title":"Front Lit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: the plain front lit mirror, with lit panels at face height and no demister.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023161954686,"sku":"BBM-MIR-002-M68","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023161987454,"sku":"BBM-MIR-002-M57","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162020222,"sku":"BBM-MIR-002-M88","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162052990,"sku":"BBM-MIR-002-M108","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239730"},{"product_id":"backlit-illuminated-mirror-in-brushed-chrome","title":"Backlit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a halo of light behind the glass, which is the one everybody wants from the photographs and which will not light your face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162085758,"sku":"BBM-MIR-003-M68","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162118526,"sku":"BBM-MIR-003-M57","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162151294,"sku":"BBM-MIR-003-M88","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162184062,"sku":"BBM-MIR-003-M108","price":399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239656"},{"product_id":"backlit-illuminated-mirror-in-matt-black","title":"Backlit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a halo of light behind the glass, which is the one everybody wants from the photographs and which will not light your face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162216830,"sku":"BBM-MIR-004-M68","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162249598,"sku":"BBM-MIR-004-M57","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162282366,"sku":"BBM-MIR-004-M88","price":349.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162315134,"sku":"BBM-MIR-004-M108","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239634"},{"product_id":"backlit-and-front-lit-illuminated-mirror-in-brushed-chrome","title":"Backlit and Front Lit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: both, on two switches, which is the honest way to sell a backlit mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 980 lumens front and 420 lumens behind, on two switches\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front and back on separate switches, so you can have the look and the light\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162347902,"sku":"BBM-MIR-005-M68","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162380670,"sku":"BBM-MIR-005-M57","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162413438,"sku":"BBM-MIR-005-M88","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162446206,"sku":"BBM-MIR-005-M108","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_and_Front_Lit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239656"},{"product_id":"backlit-and-front-lit-illuminated-mirror-in-matt-black","title":"Backlit and Front Lit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: both, on two switches, which is the honest way to sell a backlit mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 980 lumens front and 420 lumens behind, on two switches\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front and back on separate switches, so you can have the look and the light\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162478974,"sku":"BBM-MIR-006-M68","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162511742,"sku":"BBM-MIR-006-M57","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162544510,"sku":"BBM-MIR-006-M88","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162577278,"sku":"BBM-MIR-006-M108","price":529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_and_Front_Lit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239648"},{"product_id":"round-backlit-illuminated-mirror-in-brushed-chrome","title":"Round Backlit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a round halo mirror, and the same caveat applies.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162610046,"sku":"BBM-MIR-007-M68","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162642814,"sku":"BBM-MIR-007-M57","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162675582,"sku":"BBM-MIR-007-M88","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162708350,"sku":"BBM-MIR-007-M108","price":419.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Backlit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"round-backlit-illuminated-mirror-in-matt-black","title":"Round Backlit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a round halo mirror, and the same caveat applies.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162741118,"sku":"BBM-MIR-008-M68","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162773886,"sku":"BBM-MIR-008-M57","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162806654,"sku":"BBM-MIR-008-M88","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162839422,"sku":"BBM-MIR-008-M108","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Backlit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239865"},{"product_id":"front-lit-illuminated-mirror-with-a-demister-in-brushed-chrome","title":"Front Lit Illuminated Mirror with a Demister in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: front lighting plus a heated pad covering 80 per cent of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: 80 per cent coverage, switched with the light. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162872190,"sku":"BBM-MIR-009-M68","price":399.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162904958,"sku":"BBM-MIR-009-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162937726,"sku":"BBM-MIR-009-M88","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162970494,"sku":"BBM-MIR-009-M108","price":569.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_with_a_Demister_in_Brushed_Chrome.jpg?v=1789239745"},{"product_id":"front-lit-illuminated-mirror-with-a-demister-in-matt-black","title":"Front Lit Illuminated Mirror with a Demister in Matt Black","description":"\u003cp\u003eAn illuminated mirror: front lighting plus a heated pad covering 80 per cent of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: 80 per cent coverage, switched with the light. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163003262,"sku":"BBM-MIR-010-M68","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163036030,"sku":"BBM-MIR-010-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163068798,"sku":"BBM-MIR-010-M88","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163101566,"sku":"BBM-MIR-010-M108","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_with_a_Demister_in_Matt_Black.jpg?v=1789239745"},{"product_id":"illuminated-mirror-with-a-touch-dimmer-in-matt-black","title":"Illuminated Mirror with a Touch Dimmer in Matt Black","description":"\u003cp\u003eAn illuminated mirror: touch dimming from 10 to 100 per cent with no flicker at the bottom, which most touch dimmers cannot manage.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163265406,"sku":"BBM-MIR-012-M68","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163298174,"sku":"BBM-MIR-012-M57","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163330942,"sku":"BBM-MIR-012-M88","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163363710,"sku":"BBM-MIR-012-M108","price":449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Touch_Dimmer_in_Matt_Black.jpg?v=1789239746"},{"product_id":"small-illuminated-mirror-for-a-cloakroom-in-brushed-chrome","title":"Small Illuminated Mirror for a Cloakroom in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a 400 by 600mm mirror for a cloakroom, where the whole room is smaller than most mirrors are wide.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163396478,"sku":"BBM-MIR-013-M68","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163429246,"sku":"BBM-MIR-013-M57","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163462014,"sku":"BBM-MIR-013-M88","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163494782,"sku":"BBM-MIR-013-M108","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Small_Illuminated_Mirror_for_a_Cloakroom_in_Brushed_Chrome.jpg?v=1789239875"},{"product_id":"small-illuminated-mirror-for-a-cloakroom-in-matt-black","title":"Small Illuminated Mirror for a Cloakroom in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a 400 by 600mm mirror for a cloakroom, where the whole room is smaller than most mirrors are wide.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163560318,"sku":"BBM-MIR-014-M68","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163593086,"sku":"BBM-MIR-014-M57","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163625854,"sku":"BBM-MIR-014-M88","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163658622,"sku":"BBM-MIR-014-M108","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Small_Illuminated_Mirror_for_a_Cloakroom_in_Matt_Black.jpg?v=1789239875"},{"product_id":"arched-illuminated-mirror-in-brushed-chrome","title":"Arched Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: an arched top with the lighting following the curve, which is harder to make evenly lit than it looks.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163691390,"sku":"BBM-MIR-015-M68","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163724158,"sku":"BBM-MIR-015-M57","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163756926,"sku":"BBM-MIR-015-M88","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163789694,"sku":"BBM-MIR-015-M108","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Arched_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239652"},{"product_id":"arched-illuminated-mirror-in-matt-black","title":"Arched Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: an arched top with the lighting following the curve, which is harder to make evenly lit than it looks.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163822462,"sku":"BBM-MIR-016-M68","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163855230,"sku":"BBM-MIR-016-M57","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163887998,"sku":"BBM-MIR-016-M88","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163920766,"sku":"BBM-MIR-016-M108","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Arched_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239652"},{"product_id":"illuminated-mirror-with-a-magnifying-insert-in-brushed-chrome","title":"Illuminated Mirror with a Magnifying Insert in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a five times magnifying circle set into the glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163953534,"sku":"BBM-MIR-017-M68","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163986302,"sku":"BBM-MIR-017-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164019070,"sku":"BBM-MIR-017-M88","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164051838,"sku":"BBM-MIR-017-M108","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Magnifying_Insert_in_Brushed_Chrome.jpg?v=1789239734"},{"product_id":"illuminated-mirror-with-a-metal-frame-in-brushed-chrome","title":"Illuminated Mirror with a Metal Frame in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a 12mm metal frame, which is the detail that stops a lit mirror looking like a monitor.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164215678,"sku":"BBM-MIR-019-M68","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164248446,"sku":"BBM-MIR-019-M57","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164281214,"sku":"BBM-MIR-019-M88","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164313982,"sku":"BBM-MIR-019-M108","price":659.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Metal_Frame_in_Brushed_Chrome.jpg?v=1789239744"},{"product_id":"illuminated-mirror-with-a-metal-frame-in-matt-black","title":"Illuminated Mirror with a Metal Frame in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a 12mm metal frame, which is the detail that stops a lit mirror looking like a monitor.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164346750,"sku":"BBM-MIR-020-M68","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164379518,"sku":"BBM-MIR-020-M57","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164412286,"sku":"BBM-MIR-020-M88","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164445054,"sku":"BBM-MIR-020-M108","price":679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Metal_Frame_in_Matt_Black.jpg?v=1789239737"},{"product_id":"illuminated-mirror-with-a-shaver-socket-in-brushed-chrome","title":"Illuminated Mirror with a Shaver Socket in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a dual voltage shaver socket in the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164477822,"sku":"BBM-MIR-021-M68","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164510590,"sku":"BBM-MIR-021-M57","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164543358,"sku":"BBM-MIR-021-M88","price":439.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164576126,"sku":"BBM-MIR-021-M108","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Shaver_Socket_in_Brushed_Chrome.jpg?v=1789239742"},{"product_id":"illuminated-mirror-with-a-shaver-socket-in-matt-black","title":"Illuminated Mirror with a Shaver Socket in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a dual voltage shaver socket in the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164608894,"sku":"BBM-MIR-022-M68","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164641662,"sku":"BBM-MIR-022-M57","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164674430,"sku":"BBM-MIR-022-M88","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164707198,"sku":"BBM-MIR-022-M108","price":529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239744"}],"url":"https:\/\/batheandbeam.com\/collections\/mirrors.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}