{"title":"Mirrors That Light Your Face","description":"\u003cp\u003e300 to 600 lux at the face. Enough to shave by, do make-up by, and see a mole properly. If you buy one lit mirror, buy one of these.\u003c\/p\u003e","products":[{"product_id":"illuminated-mirror-cabinet-with-a-demister-pad-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Demister Pad in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: front lit at face height with a demister pad that covers the whole door rather than a postcard in the middle of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: full door coverage, 60 watts per square metre, switched with the light\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122174334,"sku":"BBM-IMC-001-C80","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122207102,"sku":"BBM-IMC-001-C100","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122239870,"sku":"BBM-IMC-001-C120","price":1574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Demister_Pad_in_Brushed_Chrome.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-a-demister-pad-in-matt-black","title":"Illuminated Mirror Cabinet with a Demister Pad in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: front lit at face height with a demister pad that covers the whole door rather than a postcard in the middle of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: full door coverage, 60 watts per square metre, switched with the light\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122272638,"sku":"BBM-IMC-002-C80","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122305406,"sku":"BBM-IMC-002-C100","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122338174,"sku":"BBM-IMC-002-C120","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Demister_Pad_in_Matt_Black.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-a-demister-pad-in-matt-white","title":"Illuminated Mirror Cabinet with a Demister Pad in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: front lit at face height with a demister pad that covers the whole door rather than a postcard in the middle of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: full door coverage, 60 watts per square metre, switched with the light\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122403710,"sku":"BBM-IMC-003-C80","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122436478,"sku":"BBM-IMC-003-C100","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122469246,"sku":"BBM-IMC-003-C120","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Demister_Pad_in_Matt_White.jpg?v=1789239730"},{"product_id":"illuminated-mirror-cabinet-with-double-sided-mirrors-in-brushed-chrome","title":"Illuminated Mirror Cabinet with Double Sided Mirrors in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: mirrored inside the doors as well as outside, which is the difference between a cabinet and a cupboard with a mirror on the front.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122534782,"sku":"BBM-IMC-004-C80","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122567550,"sku":"BBM-IMC-004-C100","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122600318,"sku":"BBM-IMC-004-C120","price":1799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Double_Sided_Mirrors_in_Brushed_Chrome.jpg?v=1789239732"},{"product_id":"illuminated-mirror-cabinet-with-double-sided-mirrors-in-matt-black","title":"Illuminated Mirror Cabinet with Double Sided Mirrors in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: mirrored inside the doors as well as outside, which is the difference between a cabinet and a cupboard with a mirror on the front.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122665854,"sku":"BBM-IMC-005-C80","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122698622,"sku":"BBM-IMC-005-C100","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122731390,"sku":"BBM-IMC-005-C120","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Double_Sided_Mirrors_in_Matt_Black.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-double-sided-mirrors-in-matt-white","title":"Illuminated Mirror Cabinet with Double Sided Mirrors in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: mirrored inside the doors as well as outside, which is the difference between a cabinet and a cupboard with a mirror on the front.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122796926,"sku":"BBM-IMC-006-C80","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122829694,"sku":"BBM-IMC-006-C100","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122862462,"sku":"BBM-IMC-006-C120","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Double_Sided_Mirrors_in_Matt_White.jpg?v=1789239734"},{"product_id":"illuminated-mirror-cabinet-with-a-shaver-socket-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Shaver Socket in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: a dual voltage shaver socket to BS EN 61558-2-5 inside the cabinet, which is where it should be rather than on the wall beside it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122895230,"sku":"BBM-IMC-007-C80","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122927998,"sku":"BBM-IMC-007-C100","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122960766,"sku":"BBM-IMC-007-C120","price":1724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Shaver_Socket_in_Brushed_Chrome.jpg?v=1789239749"},{"product_id":"illuminated-mirror-cabinet-with-a-shaver-socket-in-matt-black","title":"Illuminated Mirror Cabinet with a Shaver Socket in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: a dual voltage shaver socket to BS EN 61558-2-5 inside the cabinet, which is where it should be rather than on the wall beside it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023123026302,"sku":"BBM-IMC-008-C80","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023123059070,"sku":"BBM-IMC-008-C100","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023123091838,"sku":"BBM-IMC-008-C120","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239743"},{"product_id":"illuminated-mirror-cabinet-with-a-shaver-socket-in-matt-white","title":"Illuminated Mirror Cabinet with a Shaver Socket in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: a dual voltage shaver socket to BS EN 61558-2-5 inside the cabinet, which is where it should be rather than on the wall beside it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 27.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023123255678,"sku":"BBM-IMC-009-C80","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023123288446,"sku":"BBM-IMC-009-C100","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023123321214,"sku":"BBM-IMC-009-C120","price":1574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Shaver_Socket_in_Matt_White.jpg?v=1789239741"},{"product_id":"illuminated-mirror-cabinet-with-tunable-front-lighting-in-brushed-chrome","title":"Illuminated Mirror Cabinet with Tunable Front Lighting in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: 2700K to 5000K at the front, so the mirror can be warm at night and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023123386750,"sku":"BBM-IMC-010-C80","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023123419518,"sku":"BBM-IMC-010-C100","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023123452286,"sku":"BBM-IMC-010-C120","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Tunable_Front_Lighting_in_Brushed_Chrome.jpg?v=1789239737"},{"product_id":"illuminated-mirror-cabinet-with-tunable-front-lighting-in-matt-black","title":"Illuminated Mirror Cabinet with Tunable Front Lighting in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: 2700K to 5000K at the front, so the mirror can be warm at night and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023123517822,"sku":"BBM-IMC-011-C80","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023123550590,"sku":"BBM-IMC-011-C100","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023123583358,"sku":"BBM-IMC-011-C120","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Tunable_Front_Lighting_in_Matt_Black.jpg?v=1789239744"},{"product_id":"illuminated-mirror-cabinet-with-tunable-front-lighting-in-matt-white","title":"Illuminated Mirror Cabinet with Tunable Front Lighting in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: 2700K to 5000K at the front, so the mirror can be warm at night and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023123648894,"sku":"BBM-IMC-012-C80","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023123681662,"sku":"BBM-IMC-012-C100","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023123714430,"sku":"BBM-IMC-012-C120","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Tunable_Front_Lighting_in_Matt_White.jpg?v=1789239744"},{"product_id":"illuminated-mirror-cabinet-with-an-ambient-backlight-in-brushed-chrome","title":"Illuminated Mirror Cabinet with an Ambient Backlight in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: front lighting for the face and a separate backlight for the room, on two switches, because one of those jobs cannot do the other.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 30.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023123943806,"sku":"BBM-IMC-013-C80","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023123976574,"sku":"BBM-IMC-013-C100","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124009342,"sku":"BBM-IMC-013-C120","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_an_Ambient_Backlight_in_Brushed_Chrome.jpg?v=1789239737"},{"product_id":"illuminated-mirror-cabinet-with-an-ambient-backlight-in-matt-black","title":"Illuminated Mirror Cabinet with an Ambient Backlight in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: front lighting for the face and a separate backlight for the room, on two switches, because one of those jobs cannot do the other.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 30.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124074878,"sku":"BBM-IMC-014-C80","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124107646,"sku":"BBM-IMC-014-C100","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124140414,"sku":"BBM-IMC-014-C120","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_an_Ambient_Backlight_in_Matt_Black.jpg?v=1789239744"},{"product_id":"illuminated-mirror-cabinet-with-an-ambient-backlight-in-matt-white","title":"Illuminated Mirror Cabinet with an Ambient Backlight in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: front lighting for the face and a separate backlight for the room, on two switches, because one of those jobs cannot do the other.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124173182,"sku":"BBM-IMC-015-C80","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124205950,"sku":"BBM-IMC-015-C100","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124238718,"sku":"BBM-IMC-015-C120","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_an_Ambient_Backlight_in_Matt_White.jpg?v=1789239734"},{"product_id":"recessed-illuminated-mirror-cabinet-in-brushed-chrome","title":"Recessed Illuminated Mirror Cabinet in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: built into the stud wall so the door sits flush with the tiles, which needs a 105mm cavity and a decision before the plasterboard goes up.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 105mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: recessed into a stud wall, template supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124304254,"sku":"BBM-IMC-016-C80","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124337022,"sku":"BBM-IMC-016-C100","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124369790,"sku":"BBM-IMC-016-C120","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Recessed_Illuminated_Mirror_Cabinet_in_Brushed_Chrome.jpg?v=1789239869"},{"product_id":"recessed-illuminated-mirror-cabinet-in-matt-black","title":"Recessed Illuminated Mirror Cabinet in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: built into the stud wall so the door sits flush with the tiles, which needs a 105mm cavity and a decision before the plasterboard goes up.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 105mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: recessed into a stud wall, template supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124435326,"sku":"BBM-IMC-017-C80","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124468094,"sku":"BBM-IMC-017-C100","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124500862,"sku":"BBM-IMC-017-C120","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Recessed_Illuminated_Mirror_Cabinet_in_Matt_Black.jpg?v=1789239869"},{"product_id":"recessed-illuminated-mirror-cabinet-in-matt-white","title":"Recessed Illuminated Mirror Cabinet in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: built into the stud wall so the door sits flush with the tiles, which needs a 105mm cavity and a decision before the plasterboard goes up.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 105mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: recessed into a stud wall, template supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124566398,"sku":"BBM-IMC-018-C80","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124599166,"sku":"BBM-IMC-018-C100","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124631934,"sku":"BBM-IMC-018-C120","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Recessed_Illuminated_Mirror_Cabinet_in_Matt_White.jpg?v=1789239863"},{"product_id":"illuminated-mirror-cabinet-with-adjustable-glass-shelves-in-brushed-chrome","title":"Illuminated Mirror Cabinet with Adjustable Glass Shelves in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: 8mm toughened glass shelves on a 32mm pitch, so the shelf goes where the bottles are rather than where the factory put it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 27.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124697470,"sku":"BBM-IMC-019-C80","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124730238,"sku":"BBM-IMC-019-C100","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124763006,"sku":"BBM-IMC-019-C120","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Adjustable_Glass_Shelves_in_Brushed_Chrome.jpg?v=1789239745"},{"product_id":"illuminated-mirror-cabinet-with-adjustable-glass-shelves-in-matt-white","title":"Illuminated Mirror Cabinet with Adjustable Glass Shelves in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: 8mm toughened glass shelves on a 32mm pitch, so the shelf goes where the bottles are rather than where the factory put it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 27.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023124926846,"sku":"BBM-IMC-021-C80","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023124959614,"sku":"BBM-IMC-021-C100","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023124992382,"sku":"BBM-IMC-021-C120","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Adjustable_Glass_Shelves_in_Matt_White.jpg?v=1789239745"},{"product_id":"illuminated-mirror-cabinet-with-a-magnifying-mirror-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Magnifying Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: a five times magnifying mirror on an arm inside the door, lit separately, which is what the cabinet is really for on the days it matters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023125057918,"sku":"BBM-IMC-022-C80","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023125090686,"sku":"BBM-IMC-022-C100","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023125123454,"sku":"BBM-IMC-022-C120","price":1874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Magnifying_Mirror_in_Brushed_Chrome.jpg?v=1789239745"},{"product_id":"illuminated-mirror-cabinet-with-a-magnifying-mirror-in-matt-black","title":"Illuminated Mirror Cabinet with a Magnifying Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: a five times magnifying mirror on an arm inside the door, lit separately, which is what the cabinet is really for on the days it matters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023125188990,"sku":"BBM-IMC-023-C80","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023125221758,"sku":"BBM-IMC-023-C100","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023125254526,"sku":"BBM-IMC-023-C120","price":1924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Magnifying_Mirror_in_Matt_Black.jpg?v=1789239748"},{"product_id":"illuminated-mirror-cabinet-with-a-soft-close-frame-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Soft Close Frame in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: integrated soft close hinges rated to 80,000 cycles rather than the 20,000 that a bathroom cabinet usually gets.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023125451134,"sku":"BBM-IMC-025-C80","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023125483902,"sku":"BBM-IMC-025-C100","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023125516670,"sku":"BBM-IMC-025-C120","price":1724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Soft_Close_Frame_in_Brushed_Chrome.jpg?v=1789239742"},{"product_id":"illuminated-mirror-cabinet-with-a-soft-close-frame-in-matt-black","title":"Illuminated Mirror Cabinet with a Soft Close Frame in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: integrated soft close hinges rated to 80,000 cycles rather than the 20,000 that a bathroom cabinet usually gets.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023125582206,"sku":"BBM-IMC-026-C80","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023125614974,"sku":"BBM-IMC-026-C100","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023125647742,"sku":"BBM-IMC-026-C120","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Soft_Close_Frame_in_Matt_Black.jpg?v=1789239743"},{"product_id":"illuminated-mirror-cabinet-with-a-soft-close-frame-in-matt-white","title":"Illuminated Mirror Cabinet with a Soft Close Frame in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: integrated soft close hinges rated to 80,000 cycles rather than the 20,000 that a bathroom cabinet usually gets.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023125713278,"sku":"BBM-IMC-027-C80","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023125746046,"sku":"BBM-IMC-027-C100","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023125778814,"sku":"BBM-IMC-027-C120","price":1574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Soft_Close_Frame_in_Matt_White.jpg?v=1789239745"},{"product_id":"wide-illuminated-mirror-cabinet-for-two-basins-in-brushed-chrome","title":"Wide Illuminated Mirror Cabinet for Two Basins in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: a run wide enough to sit over two basins with the front lighting split so each side switches on its own.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 38.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023125877118,"sku":"BBM-IMC-028-C80","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023125909886,"sku":"BBM-IMC-028-C100","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023125942654,"sku":"BBM-IMC-028-C120","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wide_Illuminated_Mirror_Cabinet_for_Two_Basins_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"wide-illuminated-mirror-cabinet-for-two-basins-in-matt-black","title":"Wide Illuminated Mirror Cabinet for Two Basins in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: a run wide enough to sit over two basins with the front lighting split so each side switches on its own.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 38.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023126040958,"sku":"BBM-IMC-029-C80","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023126073726,"sku":"BBM-IMC-029-C100","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023126106494,"sku":"BBM-IMC-029-C120","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wide_Illuminated_Mirror_Cabinet_for_Two_Basins_in_Matt_Black.jpg?v=1789239877"},{"product_id":"wide-illuminated-mirror-cabinet-for-two-basins-in-matt-white","title":"Wide Illuminated Mirror Cabinet for Two Basins in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: a run wide enough to sit over two basins with the front lighting split so each side switches on its own.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023126172030,"sku":"BBM-IMC-030-C80","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023126204798,"sku":"BBM-IMC-030-C100","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023126237566,"sku":"BBM-IMC-030-C120","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wide_Illuminated_Mirror_Cabinet_for_Two_Basins_in_Matt_White.jpg?v=1789239876"},{"product_id":"illuminated-mirror-cabinet-with-a-charging-shelf-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Charging Shelf in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: a USB C and wireless charging shelf inside the cabinet on an isolated SELV supply, so the toothbrush and the razor live in the cupboard rather than on the basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 30.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023126335870,"sku":"BBM-IMC-031-C80","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023126368638,"sku":"BBM-IMC-031-C100","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023126401406,"sku":"BBM-IMC-031-C120","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Charging_Shelf_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"illuminated-mirror-cabinet-with-a-charging-shelf-in-matt-black","title":"Illuminated Mirror Cabinet with a Charging Shelf in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: a USB C and wireless charging shelf inside the cabinet on an isolated SELV supply, so the toothbrush and the razor live in the cupboard rather than on the basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 30.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023126466942,"sku":"BBM-IMC-032-C80","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023126499710,"sku":"BBM-IMC-032-C100","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023126532478,"sku":"BBM-IMC-032-C120","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Charging_Shelf_in_Matt_Black.jpg?v=1789239740"},{"product_id":"front-lit-demisting-mirror-in-brushed-chrome","title":"Front Lit Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126696318,"sku":"BBM-LDM-001-M68","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126729086,"sku":"BBM-LDM-001-M88","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023126761854,"sku":"BBM-LDM-001-M108","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"front-lit-demisting-mirror-in-matt-black","title":"Front Lit Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126827390,"sku":"BBM-LDM-002-M68","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126860158,"sku":"BBM-LDM-002-M88","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023126892926,"sku":"BBM-LDM-002-M108","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Matt_Black.jpg?v=1789239741"},{"product_id":"front-lit-demisting-mirror-in-brushed-brass","title":"Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126958462,"sku":"BBM-LDM-003-M68","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126991230,"sku":"BBM-LDM-003-M88","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127023998,"sku":"BBM-LDM-003-M108","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239742"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-chrome","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127089534,"sku":"BBM-LDM-004-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127122302,"sku":"BBM-LDM-004-M88","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127155070,"sku":"BBM-LDM-004-M108","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Chrome.jpg?v=1789239743"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-brass","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127351678,"sku":"BBM-LDM-006-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127384446,"sku":"BBM-LDM-006-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127417214,"sku":"BBM-LDM-006-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Brass.jpg?v=1789239740"},{"product_id":"demisting-mirror-with-front-and-ambient-lighting-in-matt-black","title":"Demisting Mirror with Front and Ambient Lighting in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a front lit panel for the face and a separate halo for the room, on two switches.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127613822,"sku":"BBM-LDM-008-M68","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127646590,"sku":"BBM-LDM-008-M88","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127679358,"sku":"BBM-LDM-008-M108","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_Front_and_Ambient_Lighting_in_Matt_Black.jpg?v=1789239659"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-chrome","title":"Round Front Lit Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127875966,"sku":"BBM-LDM-010-M68","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127908734,"sku":"BBM-LDM-010-M88","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127941502,"sku":"BBM-LDM-010-M108","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239868"},{"product_id":"round-front-lit-demisting-mirror-in-matt-black","title":"Round Front Lit Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127974270,"sku":"BBM-LDM-011-M68","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128007038,"sku":"BBM-LDM-011-M88","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128039806,"sku":"BBM-LDM-011-M108","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Matt_Black.jpg?v=1789239867"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-brass","title":"Round Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128105342,"sku":"BBM-LDM-012-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128138110,"sku":"BBM-LDM-012-M88","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128170878,"sku":"BBM-LDM-012-M108","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239868"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-chrome","title":"Demisting Mirror with a Magnifying Insert in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128236414,"sku":"BBM-LDM-013-M68","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128269182,"sku":"BBM-LDM-013-M88","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128301950,"sku":"BBM-LDM-013-M108","price":1924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-brass","title":"Demisting Mirror with a Magnifying Insert in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128629630,"sku":"BBM-LDM-015-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128662398,"sku":"BBM-LDM-015-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128695166,"sku":"BBM-LDM-015-M108","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Brass.jpg?v=1789239654"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-chrome","title":"Landscape Demisting Mirror for Two Basins in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128826238,"sku":"BBM-LDM-016-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128859006,"sku":"BBM-LDM-016-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128891774,"sku":"BBM-LDM-016-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-matt-black","title":"Landscape Demisting Mirror for Two Basins in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128957310,"sku":"BBM-LDM-017-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128990078,"sku":"BBM-LDM-017-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129022846,"sku":"BBM-LDM-017-M108","price":2424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Matt_Black.jpg?v=1789239875"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-brass","title":"Landscape Demisting Mirror for Two Basins in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129088382,"sku":"BBM-LDM-018-M68","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129121150,"sku":"BBM-LDM-018-M88","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129153918,"sku":"BBM-LDM-018-M108","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Brass.jpg?v=1789239866"},{"product_id":"demisting-mirror-with-a-clock-and-temperature-display-in-matt-black","title":"Demisting Mirror with a Clock and Temperature Display in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a discreet display in the corner of the glass, which is either the best or the worst thing in this shop depending entirely on who you are.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129317758,"sku":"BBM-LDM-020-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129350526,"sku":"BBM-LDM-020-M88","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129383294,"sku":"BBM-LDM-020-M108","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Clock_and_Temperature_Display_in_Matt_Black.jpg?v=1789239659"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-chrome","title":"Demisting Mirror with a Metal Frame in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129645438,"sku":"BBM-LDM-022-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129678206,"sku":"BBM-LDM-022-M88","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129710974,"sku":"BBM-LDM-022-M108","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Chrome.jpg?v=1789239659"},{"product_id":"demisting-mirror-with-a-metal-frame-in-matt-black","title":"Demisting Mirror with a Metal Frame in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129776510,"sku":"BBM-LDM-023-M68","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129809278,"sku":"BBM-LDM-023-M88","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129842046,"sku":"BBM-LDM-023-M108","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Matt_Black.jpg?v=1789239658"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-brass","title":"Demisting Mirror with a Metal Frame in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129907582,"sku":"BBM-LDM-024-M68","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129940350,"sku":"BBM-LDM-024-M88","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129973118,"sku":"BBM-LDM-024-M108","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Brass.jpg?v=1789239652"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-matt-black","title":"Demisting Mirror with a Shaver Socket in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130169726,"sku":"BBM-LDM-026-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130202494,"sku":"BBM-LDM-026-M88","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130235262,"sku":"BBM-LDM-026-M108","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239661"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-brushed-brass","title":"Demisting Mirror with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130300798,"sku":"BBM-LDM-027-M68","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130333566,"sku":"BBM-LDM-027-M88","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130366334,"sku":"BBM-LDM-027-M108","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239657"}],"url":"https:\/\/batheandbeam.com\/collections\/mirrors-front-lit.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}