{"title":"Mirror Lights And Bars","description":"\u003cp\u003eOver-mirror bars, vertical pairs and swing arms. A vertical pair either side of the mirror beats a single bar across the top every time, because side light fills shadow instead of casting it down your face.\u003c\/p\u003e","products":[{"product_id":"over-mirror-light-bar-at-600mm-in-brushed-chrome","title":"Over Mirror Light Bar at 600mm in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: a bar above the mirror, which is the second best place to light a face and much better than a ceiling downlight behind you.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158251902,"sku":"BBM-MRB-001-27","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158284670,"sku":"BBM-MRB-001-30","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158317438,"sku":"BBM-MRB-001-40","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_Bar_at_600mm_in_Brushed_Chrome.jpg?v=1789239867"},{"product_id":"over-mirror-light-bar-at-600mm-in-matt-black","title":"Over Mirror Light Bar at 600mm in Matt Black","description":"\u003cp\u003eLight at the mirror: a bar above the mirror, which is the second best place to light a face and much better than a ceiling downlight behind you.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158350206,"sku":"BBM-MRB-002-27","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158382974,"sku":"BBM-MRB-002-30","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158415742,"sku":"BBM-MRB-002-40","price":94.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_Bar_at_600mm_in_Matt_Black.jpg?v=1789239859"},{"product_id":"over-mirror-light-bar-at-600mm-in-brushed-brass","title":"Over Mirror Light Bar at 600mm in Brushed Brass","description":"\u003cp\u003eLight at the mirror: a bar above the mirror, which is the second best place to light a face and much better than a ceiling downlight behind you.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158481278,"sku":"BBM-MRB-003-27","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158514046,"sku":"BBM-MRB-003-30","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158546814,"sku":"BBM-MRB-003-40","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_Bar_at_600mm_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"over-mirror-light-bar-at-900mm-in-brushed-chrome","title":"Over Mirror Light Bar at 900mm in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: a longer bar for a wide mirror, so the light reaches both edges of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 900mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1400 lumens at 86 lumens per circuit watt, giving 336 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 336 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158579582,"sku":"BBM-MRB-004-27","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158612350,"sku":"BBM-MRB-004-30","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158645118,"sku":"BBM-MRB-004-40","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_Bar_at_900mm_in_Brushed_Chrome.jpg?v=1789239864"},{"product_id":"over-mirror-light-bar-at-900mm-in-matt-black","title":"Over Mirror Light Bar at 900mm in Matt Black","description":"\u003cp\u003eLight at the mirror: a longer bar for a wide mirror, so the light reaches both edges of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 900mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1400 lumens at 86 lumens per circuit watt, giving 336 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 336 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158677886,"sku":"BBM-MRB-005-27","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158710654,"sku":"BBM-MRB-005-30","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158743422,"sku":"BBM-MRB-005-40","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_Bar_at_900mm_in_Matt_Black.jpg?v=1789239865"},{"product_id":"pair-of-vertical-mirror-lights-in-brushed-chrome","title":"Pair of Vertical Mirror Lights in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: two vertical fittings at face height either side of the mirror, which is the best arrangement there is and the one that fills the shadows under the eyes.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1200 lumens at 86 lumens per circuit watt, giving 288 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 288 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158874494,"sku":"BBM-MRB-007-27","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158907262,"sku":"BBM-MRB-007-30","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158940030,"sku":"BBM-MRB-007-40","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pair_of_Vertical_Mirror_Lights_in_Brushed_Chrome.jpg?v=1789239863"},{"product_id":"pair-of-vertical-mirror-lights-in-matt-black","title":"Pair of Vertical Mirror Lights in Matt Black","description":"\u003cp\u003eLight at the mirror: two vertical fittings at face height either side of the mirror, which is the best arrangement there is and the one that fills the shadows under the eyes.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1200 lumens at 86 lumens per circuit watt, giving 288 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 288 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158972798,"sku":"BBM-MRB-008-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159005566,"sku":"BBM-MRB-008-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159038334,"sku":"BBM-MRB-008-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pair_of_Vertical_Mirror_Lights_in_Matt_Black.jpg?v=1789239867"},{"product_id":"pair-of-vertical-mirror-lights-in-brushed-brass","title":"Pair of Vertical Mirror Lights in Brushed Brass","description":"\u003cp\u003eLight at the mirror: two vertical fittings at face height either side of the mirror, which is the best arrangement there is and the one that fills the shadows under the eyes.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1200 lumens at 86 lumens per circuit watt, giving 288 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 288 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159071102,"sku":"BBM-MRB-009-27","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159103870,"sku":"BBM-MRB-009-30","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159136638,"sku":"BBM-MRB-009-40","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pair_of_Vertical_Mirror_Lights_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"over-mirror-light-with-a-shaver-socket-in-brushed-chrome","title":"Over Mirror Light with a Shaver Socket in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: the bar with an integrated dual voltage shaver socket to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159202174,"sku":"BBM-MRB-010-27","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159234942,"sku":"BBM-MRB-010-30","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159267710,"sku":"BBM-MRB-010-40","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Shaver_Socket_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"over-mirror-light-with-a-shaver-socket-in-matt-black","title":"Over Mirror Light with a Shaver Socket in Matt Black","description":"\u003cp\u003eLight at the mirror: the bar with an integrated dual voltage shaver socket to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159300478,"sku":"BBM-MRB-011-27","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159333246,"sku":"BBM-MRB-011-30","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159366014,"sku":"BBM-MRB-011-40","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239870"},{"product_id":"over-mirror-light-with-a-shaver-socket-in-brushed-brass","title":"Over Mirror Light with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eLight at the mirror: the bar with an integrated dual voltage shaver socket to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159398782,"sku":"BBM-MRB-012-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159431550,"sku":"BBM-MRB-012-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159464318,"sku":"BBM-MRB-012-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"over-mirror-light-with-cri-97-in-brushed-chrome","title":"Over Mirror Light with CRI 97 in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: CRI 97 with R9 above 90, which is what makes the difference at a mirror and nowhere else in the room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159497086,"sku":"BBM-MRB-013-27","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159529854,"sku":"BBM-MRB-013-30","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159562622,"sku":"BBM-MRB-013-40","price":139.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_CRI_97_in_Brushed_Chrome.jpg?v=1789239867"},{"product_id":"over-mirror-light-with-cri-97-in-matt-black","title":"Over Mirror Light with CRI 97 in Matt Black","description":"\u003cp\u003eLight at the mirror: CRI 97 with R9 above 90, which is what makes the difference at a mirror and nowhere else in the room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159595390,"sku":"BBM-MRB-014-27","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159628158,"sku":"BBM-MRB-014-30","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159660926,"sku":"BBM-MRB-014-40","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_CRI_97_in_Matt_Black.jpg?v=1789239864"},{"product_id":"tunable-over-mirror-light-bar-in-brushed-chrome","title":"Tunable Over Mirror Light Bar in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159791998,"sku":"BBM-MRB-016-27","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159824766,"sku":"BBM-MRB-016-30","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159857534,"sku":"BBM-MRB-016-40","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Brushed_Chrome.jpg?v=1789239876"},{"product_id":"tunable-over-mirror-light-bar-in-matt-black","title":"Tunable Over Mirror Light Bar in Matt Black","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159890302,"sku":"BBM-MRB-017-27","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159923070,"sku":"BBM-MRB-017-30","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159955838,"sku":"BBM-MRB-017-40","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Matt_Black.jpg?v=1789239870"},{"product_id":"tunable-over-mirror-light-bar-in-brushed-brass","title":"Tunable Over Mirror Light Bar in Brushed Brass","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159988606,"sku":"BBM-MRB-018-27","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160021374,"sku":"BBM-MRB-018-30","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160054142,"sku":"BBM-MRB-018-40","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Brushed_Brass.jpg?v=1789239874"},{"product_id":"over-mirror-light-with-a-motion-sensor-in-brushed-chrome","title":"Over Mirror Light with a Motion Sensor in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: a sensor that brings it up as somebody approaches the basin, which sounds like a gimmick and is the thing people say they miss when they move house.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160086910,"sku":"BBM-MRB-019-27","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160119678,"sku":"BBM-MRB-019-30","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160152446,"sku":"BBM-MRB-019-40","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Motion_Sensor_in_Brushed_Chrome.jpg?v=1789239867"},{"product_id":"over-mirror-light-with-a-motion-sensor-in-matt-black","title":"Over Mirror Light with a Motion Sensor in Matt Black","description":"\u003cp\u003eLight at the mirror: a sensor that brings it up as somebody approaches the basin, which sounds like a gimmick and is the thing people say they miss when they move house.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160185214,"sku":"BBM-MRB-020-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160217982,"sku":"BBM-MRB-020-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160250750,"sku":"BBM-MRB-020-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Motion_Sensor_in_Matt_Black.jpg?v=1789239868"},{"product_id":"slim-over-mirror-light-at-15mm-deep-in-brushed-chrome","title":"Slim Over Mirror Light at 15mm Deep in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: 15mm from the wall, for a mirror set close to a tiled recess.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 15mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 800 lumens at 86 lumens per circuit watt, giving 192 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 192 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160381822,"sku":"BBM-MRB-022-27","price":109.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160414590,"sku":"BBM-MRB-022-30","price":109.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160447358,"sku":"BBM-MRB-022-40","price":109.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_Over_Mirror_Light_at_15mm_Deep_in_Brushed_Chrome.jpg?v=1789239868"},{"product_id":"slim-over-mirror-light-at-15mm-deep-in-matt-black","title":"Slim Over Mirror Light at 15mm Deep in Matt Black","description":"\u003cp\u003eLight at the mirror: 15mm from the wall, for a mirror set close to a tiled recess.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 15mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 800 lumens at 86 lumens per circuit watt, giving 192 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 192 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160480126,"sku":"BBM-MRB-023-27","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160512894,"sku":"BBM-MRB-023-30","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160545662,"sku":"BBM-MRB-023-40","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_Over_Mirror_Light_at_15mm_Deep_in_Matt_Black.jpg?v=1789239873"},{"product_id":"slim-over-mirror-light-at-15mm-deep-in-brushed-brass","title":"Slim Over Mirror Light at 15mm Deep in Brushed Brass","description":"\u003cp\u003eLight at the mirror: 15mm from the wall, for a mirror set close to a tiled recess.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 15mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 800 lumens at 86 lumens per circuit watt, giving 192 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 192 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160578430,"sku":"BBM-MRB-024-27","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160611198,"sku":"BBM-MRB-024-30","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160643966,"sku":"BBM-MRB-024-40","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_Over_Mirror_Light_at_15mm_Deep_in_Brushed_Brass.jpg?v=1789239875"},{"product_id":"over-mirror-light-with-an-opal-glass-on-a-brass-bar-in-brushed-chrome","title":"Over Mirror Light with an Opal Glass on a Brass Bar in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: a solid brass bar with a hand blown opal glass, for a bathroom where the fitting is meant to be seen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 850 lumens at 86 lumens per circuit watt, giving 204 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 204 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160709502,"sku":"BBM-MRB-025-27","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160742270,"sku":"BBM-MRB-025-30","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160775038,"sku":"BBM-MRB-025-40","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_an_Opal_Glass_on_a_Brass_Bar_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"over-mirror-light-with-an-opal-glass-on-a-brass-bar-in-matt-black","title":"Over Mirror Light with an Opal Glass on a Brass Bar in Matt Black","description":"\u003cp\u003eLight at the mirror: a solid brass bar with a hand blown opal glass, for a bathroom where the fitting is meant to be seen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 850 lumens at 86 lumens per circuit watt, giving 204 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 204 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160807806,"sku":"BBM-MRB-026-27","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160840574,"sku":"BBM-MRB-026-30","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160873342,"sku":"BBM-MRB-026-40","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_an_Opal_Glass_on_a_Brass_Bar_in_Matt_Black.jpg?v=1789239861"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-brushed-chrome","title":"Adjustable Over Mirror Light on a Swing Arm in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161004414,"sku":"BBM-MRB-028-27","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161037182,"sku":"BBM-MRB-028-30","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161069950,"sku":"BBM-MRB-028-40","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Brushed_Chrome.jpg?v=1789239636"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-matt-black","title":"Adjustable Over Mirror Light on a Swing Arm in Matt Black","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161102718,"sku":"BBM-MRB-029-27","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161135486,"sku":"BBM-MRB-029-30","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161168254,"sku":"BBM-MRB-029-40","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Matt_Black.jpg?v=1789239634"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-brushed-brass","title":"Adjustable Over Mirror Light on a Swing Arm in Brushed Brass","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161201022,"sku":"BBM-MRB-030-27","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161233790,"sku":"BBM-MRB-030-30","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161266558,"sku":"BBM-MRB-030-40","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Brushed_Brass.jpg?v=1789239633"},{"product_id":"over-mirror-light-with-a-downward-baffle-in-brushed-chrome","title":"Over Mirror Light with a Downward Baffle in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: a baffle that stops the fitting glaring into the eyes of somebody looking up, which is the commonest complaint about an over mirror bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: a downward baffle keeps the source out of direct view\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161332094,"sku":"BBM-MRB-031-27","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161364862,"sku":"BBM-MRB-031-30","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161397630,"sku":"BBM-MRB-031-40","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Downward_Baffle_in_Brushed_Chrome.jpg?v=1789239869"},{"product_id":"over-mirror-light-with-a-downward-baffle-in-brushed-brass","title":"Over Mirror Light with a Downward Baffle in Brushed Brass","description":"\u003cp\u003eLight at the mirror: a baffle that stops the fitting glaring into the eyes of somebody looking up, which is the commonest complaint about an over mirror bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: a downward baffle keeps the source out of direct view\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161725310,"sku":"BBM-MRB-033-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161758078,"sku":"BBM-MRB-033-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161790846,"sku":"BBM-MRB-033-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Downward_Baffle_in_Brushed_Brass.jpg?v=1789239874"}],"url":"https:\/\/batheandbeam.com\/collections\/mirror-lights.oembed?page=2","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}