{"title":"Bulbs And Lamps","description":"\u003cp\u003eGU10, E14, E27 and G9 in CRI 97 and dim-to-warm, plus amber night lamps at 1800K. Match the colour temperature across the whole room; mixing them is the commonest mistake in a bathroom scheme.\u003c\/p\u003e","products":[{"product_id":"dimmable-gu10-led-lamp-in-cri-97-at-2700k","title":"Dimmable GU10 LED Lamp in CRI 97 at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: the lamp to put in an existing bathroom downlight, because a CRI 97 lamp in an old fitting beats a CRI 80 fitting bought new.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.06 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170605438,"sku":"BBM-BLB-001-X1","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_in_CRI_97_at_2700K.jpg?v=1789239635"},{"product_id":"dimmable-gu10-led-lamp-in-cri-97-at-4000k","title":"Dimmable GU10 LED Lamp in CRI 97 at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: the lamp to put in an existing bathroom downlight, because a CRI 97 lamp in an old fitting beats a CRI 80 fitting bought new.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.06 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170638206,"sku":"BBM-BLB-002-X1","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_in_CRI_97_at_4000K.jpg?v=1789239644"},{"product_id":"dimmable-e14-candle-lamp-for-a-bathroom-pendant-at-2700k","title":"Dimmable E14 Candle Lamp for a Bathroom Pendant at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: a dimmable candle lamp, which most decorative LED candles are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E14 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.04 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170736510,"sku":"BBM-BLB-005-X1","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E14_Candle_Lamp_for_a_Bathroom_Pendant_at_2700K.jpg?v=1789239650"},{"product_id":"dimmable-e14-candle-lamp-for-a-bathroom-pendant-at-4000k","title":"Dimmable E14 Candle Lamp for a Bathroom Pendant at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: a dimmable candle lamp, which most decorative LED candles are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E14 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.04 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170769278,"sku":"BBM-BLB-006-X1","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E14_Candle_Lamp_for_a_Bathroom_Pendant_at_4000K.jpg?v=1789239646"},{"product_id":"dimmable-e27-globe-lamp-in-opal-at-2700k","title":"Dimmable E27 Globe Lamp in Opal at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: a 95mm opal globe for a pendant where the lamp is visible.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E27 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.08 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170802046,"sku":"BBM-BLB-007-X1","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E27_Globe_Lamp_in_Opal_at_2700K.jpg?v=1789239652"},{"product_id":"dimmable-e27-globe-lamp-in-opal-at-4000k","title":"Dimmable E27 Globe Lamp in Opal at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: a 95mm opal globe for a pendant where the lamp is visible.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E27 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.08 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170834814,"sku":"BBM-BLB-008-X1","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E27_Globe_Lamp_in_Opal_at_4000K.jpg?v=1789239653"},{"product_id":"dimmable-g9-led-capsule-at-2700k","title":"Dimmable G9 LED Capsule at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: a G9 that actually dims and does not buzz, which took the industry about eight years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard G9 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.02 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170867582,"sku":"BBM-BLB-009-X1","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_G9_LED_Capsule_at_2700K.jpg?v=1789239658"},{"product_id":"dimmable-gu10-led-lamp-with-a-narrow-beam-at-2700k","title":"Dimmable GU10 LED Lamp with a Narrow Beam at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: a 24 degree beam for a high ceiling.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.06 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170933118,"sku":"BBM-BLB-011-X1","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_with_a_Narrow_Beam_at_2700K.jpg?v=1789239641"},{"product_id":"dimmable-gu10-led-lamp-with-a-narrow-beam-at-4000k","title":"Dimmable GU10 LED Lamp with a Narrow Beam at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: a 24 degree beam for a high ceiling.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.06 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170965886,"sku":"BBM-BLB-012-X1","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_with_a_Narrow_Beam_at_4000K.jpg?v=1789239641"},{"product_id":"amber-night-lamp-at-1800k-at-4000k","title":"Amber Night Lamp at 1800K at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: 1800K amber for a night circuit, at an output low enough to see by and not to wake by.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E27 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.05 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023171031422,"sku":"BBM-BLB-014-X1","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Amber_Night_Lamp_at_1800K_at_4000K.jpg?v=1789239651"},{"product_id":"dimmable-gu10-led-lamp-in-a-five-pack-at-2700k","title":"Dimmable GU10 LED Lamp in a Five Pack at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: five of the standard CRI 97 lamp, which is what a bathroom ceiling usually needs.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: five\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023171064190,"sku":"BBM-BLB-015-X1","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_in_a_Five_Pack_at_2700K.jpg?v=1789239638"},{"product_id":"dimmable-gu10-led-lamp-in-a-five-pack-at-4000k","title":"Dimmable GU10 LED Lamp in a Five Pack at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: five of the standard CRI 97 lamp, which is what a bathroom ceiling usually needs.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard GU10 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 450 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.30 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: five\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023171096958,"sku":"BBM-BLB-016-X1","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_GU10_LED_Lamp_in_a_Five_Pack_at_4000K.jpg?v=1789239635"},{"product_id":"dimmable-e27-filament-lamp-in-clear-glass-at-2700k","title":"Dimmable E27 Filament Lamp in Clear Glass at 2700K","description":"\u003cp\u003eA lamp for a bathroom fitting: a filament lamp for a fitting with a visible lamp, dimmable and warm.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E27 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.08 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K warm white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023171129726,"sku":"BBM-BLB-017-X1","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E27_Filament_Lamp_in_Clear_Glass_at_2700K.jpg?v=1789239650"},{"product_id":"dimmable-e27-filament-lamp-in-clear-glass-at-4000k","title":"Dimmable E27 Filament Lamp in Clear Glass at 4000K","description":"\u003cp\u003eA lamp for a bathroom fitting: a filament lamp for a fitting with a visible lamp, dimmable and warm.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: outside the zones only, which means more than 600mm from the edge of a bath or shower and more than 600mm from a basin tap. We would still fit an IP44 product in a bathroom, and this one is, but the regulations do not require it here. A lamp takes the rating of the fitting it goes into, which is the thing to remember: an IP65 fitting with any lamp in it is still IP65, and an IP20 fitting with an expensive lamp in it is still IP20\u003c\/li\u003e\n\u003cli\u003eIP rating: the fitting decides, not the lamp\u003c\/li\u003e\n\u003cli\u003eDimensions: standard E27 envelope\u003c\/li\u003e\n\u003cli\u003eLight output: 470 lumens at 82 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: dimmable on a trailing edge dimmer, to 5 per cent without flicker. Most decorative LED lamps are not dimmable at all and do not say so on the front of the box\u003c\/li\u003e\n\u003cli\u003eElectrical: 230V, integral driver\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.08 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white\u003c\/li\u003e\n\u003cli\u003eRated life: 25,000 hours to L80, meaning 80 per cent of the original output still remains at that point, which is the honest way to quote it\u003c\/li\u003e\n\u003cli\u003eSwitching cycles: 50,000, which matters in a bathroom more than anywhere because the light goes on and off a dozen times a day\u003c\/li\u003e\n\u003cli\u003ePack: one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe lamp or lamps\u003c\/li\u003e\n\u003cli\u003ea datasheet by download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNothing to install. If it is going into a sealed fitting, let the fitting cool before you open the gasket and check the gasket seats cleanly when you close it.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe cheapest useful upgrade to an existing bathroom is a set of CRI 97 lamps in the fittings that are already there. It costs a tenth of what new fittings cost and it changes how a face looks in the mirror more than new fittings would, because colour rendering is what that job depends on. Check the lamp is dimmable if the circuit is dimmed, and check the cap type, and there is nothing else to get wrong.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023171162494,"sku":"BBM-BLB-018-X1","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Dimmable_E27_Filament_Lamp_in_Clear_Glass_at_4000K.jpg?v=1789239654"}],"url":"https:\/\/batheandbeam.com\/collections\/lamps.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}