{"title":"Starter Kits","description":"\u003cp\u003eMatched fittings in one box: one colour temperature, drivers from one family, and a dimmer sized to the load. The sensible answer when a bathroom is being refreshed rather than rebuilt.\u003c\/p\u003e","products":[{"product_id":"mirror-lighting-kit-with-a-bar-and-a-shaver-socket-in-brushed-chrome","title":"Mirror Lighting Kit with a Bar and a Shaver Socket in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: the two fittings that actually change how a bathroom works, bought together and wired on one visit.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023171916158,"sku":"BBM-KIT-001-27","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023171948926,"sku":"BBM-KIT-001-30","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023171981694,"sku":"BBM-KIT-001-40","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Mirror_Lighting_Kit_with_a_Bar_and_a_Shaver_Socket_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"mirror-lighting-kit-with-a-bar-and-a-shaver-socket-in-matt-white","title":"Mirror Lighting Kit with a Bar and a Shaver Socket in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: the two fittings that actually change how a bathroom works, bought together and wired on one visit.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.3 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172014462,"sku":"BBM-KIT-002-27","price":509.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172047230,"sku":"BBM-KIT-002-30","price":509.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172079998,"sku":"BBM-KIT-002-40","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Mirror_Lighting_Kit_with_a_Bar_and_a_Shaver_Socket_in_Matt_White.jpg?v=1789239862"},{"product_id":"mirror-lighting-kit-with-a-vertical-pair-in-brushed-chrome","title":"Mirror Lighting Kit with a Vertical Pair in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: two vertical fittings at face height either side of the mirror, which is the best lighting a bathroom can have and costs less than the six downlights it replaces.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172112766,"sku":"BBM-KIT-003-27","price":709.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172145534,"sku":"BBM-KIT-003-30","price":709.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172178302,"sku":"BBM-KIT-003-40","price":709.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Mirror_Lighting_Kit_with_a_Vertical_Pair_in_Brushed_Chrome.jpg?v=1789239861"},{"product_id":"mirror-lighting-kit-with-a-vertical-pair-in-matt-white","title":"Mirror Lighting Kit with a Vertical Pair in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: two vertical fittings at face height either side of the mirror, which is the best lighting a bathroom can have and costs less than the six downlights it replaces.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172211070,"sku":"BBM-KIT-004-27","price":639.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172243838,"sku":"BBM-KIT-004-30","price":639.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172276606,"sku":"BBM-KIT-004-40","price":639.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Mirror_Lighting_Kit_with_a_Vertical_Pair_in_Matt_White.jpg?v=1789239870"},{"product_id":"bathroom-refresh-kit-with-four-downlights-and-a-mirror-light-in-brushed-chrome","title":"Bathroom Refresh Kit with Four Downlights and a Mirror Light in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: the smallest sensible whole room change: four IP65 downlights, a mirror bar and a dimmer matched to the load.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.8 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172309374,"sku":"BBM-KIT-005-27","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172342142,"sku":"BBM-KIT-005-30","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172374910,"sku":"BBM-KIT-005-40","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Refresh_Kit_with_Four_Downlights_and_a_Mirror_Light_in_Brushed_Chrome.jpg?v=1789239641"},{"product_id":"bathroom-refresh-kit-with-four-downlights-and-a-mirror-light-in-matt-white","title":"Bathroom Refresh Kit with Four Downlights and a Mirror Light in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: the smallest sensible whole room change: four IP65 downlights, a mirror bar and a dimmer matched to the load.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.7 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172407678,"sku":"BBM-KIT-006-27","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172440446,"sku":"BBM-KIT-006-30","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172473214,"sku":"BBM-KIT-006-40","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Refresh_Kit_with_Four_Downlights_and_a_Mirror_Light_in_Matt_White.jpg?v=1789239654"},{"product_id":"bathroom-refresh-kit-with-six-downlights-and-a-dimmer-in-brushed-chrome","title":"Bathroom Refresh Kit with Six Downlights and a Dimmer in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: six fittings and the dimmer, with the drivers all from one family so they dim together rather than in steps.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172505982,"sku":"BBM-KIT-007-27","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172538750,"sku":"BBM-KIT-007-30","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172571518,"sku":"BBM-KIT-007-40","price":659.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Bathroom_Refresh_Kit_with_Six_Downlights_and_a_Dimmer_in_Brushed_Chrome.jpg?v=1789239646"},{"product_id":"cloakroom-lighting-kit-in-brushed-chrome","title":"Cloakroom Lighting Kit in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: two downlights, a mirror light and a dimmer, for a room with no bath or shower and therefore no zone.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172702590,"sku":"BBM-KIT-009-27","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172735358,"sku":"BBM-KIT-009-30","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172768126,"sku":"BBM-KIT-009-40","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Cloakroom_Lighting_Kit_in_Brushed_Chrome.jpg?v=1789239648"},{"product_id":"cloakroom-lighting-kit-in-matt-white","title":"Cloakroom Lighting Kit in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: two downlights, a mirror light and a dimmer, for a room with no bath or shower and therefore no zone.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.5 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172800894,"sku":"BBM-KIT-010-27","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172833662,"sku":"BBM-KIT-010-30","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172866430,"sku":"BBM-KIT-010-40","price":459.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Cloakroom_Lighting_Kit_in_Matt_White.jpg?v=1789239656"},{"product_id":"shower-lighting-kit-with-two-ip65-fittings-in-brushed-chrome","title":"Shower Lighting Kit with Two IP65 Fittings in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: two zone 1 rated fittings and the sealed connectors to wire them, for the one part of a bathroom where the rating is not optional.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.8 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023172899198,"sku":"BBM-KIT-011-27","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023172931966,"sku":"BBM-KIT-011-30","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023172964734,"sku":"BBM-KIT-011-40","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Shower_Lighting_Kit_with_Two_IP65_Fittings_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"shower-lighting-kit-with-two-ip65-fittings-in-matt-white","title":"Shower Lighting Kit with Two IP65 Fittings in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: two zone 1 rated fittings and the sealed connectors to wire them, for the one part of a bathroom where the rating is not optional.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.7 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173030270,"sku":"BBM-KIT-012-27","price":489.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173063038,"sku":"BBM-KIT-012-30","price":489.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173095806,"sku":"BBM-KIT-012-40","price":489.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Shower_Lighting_Kit_with_Two_IP65_Fittings_in_Matt_White.jpg?v=1789239876"},{"product_id":"extractor-and-lighting-kit-in-brushed-chrome","title":"Extractor and Lighting Kit in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: a humidity sensed fan, four downlights and the duct kit, specified together so the extract rate and the room volume match.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.2 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173128574,"sku":"BBM-KIT-013-27","price":769.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173161342,"sku":"BBM-KIT-013-30","price":769.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173194110,"sku":"BBM-KIT-013-40","price":769.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_and_Lighting_Kit_in_Brushed_Chrome.jpg?v=1789239652"},{"product_id":"extractor-and-lighting-kit-in-matt-white","title":"Extractor and Lighting Kit in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: a humidity sensed fan, four downlights and the duct kit, specified together so the extract rate and the room volume match.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.1 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173226878,"sku":"BBM-KIT-014-27","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173259646,"sku":"BBM-KIT-014-30","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173292414,"sku":"BBM-KIT-014-40","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_and_Lighting_Kit_in_Matt_White.jpg?v=1789239654"},{"product_id":"night-lighting-kit-for-a-bathroom-in-brushed-chrome","title":"Night Lighting Kit for a Bathroom in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: a 1 lux amber floor circuit and the switch to run it separately, retrofitted to an existing bathroom, which is the cheapest useful thing on this whole site.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.0 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173325182,"sku":"BBM-KIT-015-27","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173357950,"sku":"BBM-KIT-015-30","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173390718,"sku":"BBM-KIT-015-40","price":579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Night_Lighting_Kit_for_a_Bathroom_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"night-lighting-kit-for-a-bathroom-in-matt-white","title":"Night Lighting Kit for a Bathroom in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: a 1 lux amber floor circuit and the switch to run it separately, retrofitted to an existing bathroom, which is the cheapest useful thing on this whole site.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.9 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173423486,"sku":"BBM-KIT-016-27","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173456254,"sku":"BBM-KIT-016-30","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173489022,"sku":"BBM-KIT-016-40","price":529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Night_Lighting_Kit_for_a_Bathroom_in_Matt_White.jpg?v=1789239865"},{"product_id":"mirror-and-light-kit-for-a-cloakroom-in-brushed-chrome","title":"Mirror and Light Kit for a Cloakroom in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: a small front lit mirror and a shaver socket, which between them furnish a cloakroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173521790,"sku":"BBM-KIT-017-27","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173554558,"sku":"BBM-KIT-017-30","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173587326,"sku":"BBM-KIT-017-40","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Mirror_and_Light_Kit_for_a_Cloakroom_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"mirror-and-light-kit-for-a-cloakroom-in-matt-white","title":"Mirror and Light Kit for a Cloakroom in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: a small front lit mirror and a shaver socket, which between them furnish a cloakroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173620094,"sku":"BBM-KIT-018-27","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173652862,"sku":"BBM-KIT-018-30","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173685630,"sku":"BBM-KIT-018-40","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Mirror_and_Light_Kit_for_a_Cloakroom_in_Matt_White.jpg?v=1789239871"},{"product_id":"wet-room-starter-kit-with-two-ip65-fittings-in-brushed-chrome","title":"Wet Room Starter Kit with Two IP65 Fittings in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: two 316 stainless zone 1 fittings and IP68 gel connectors, for a wet room being done a corner at a time.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.6 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023173718398,"sku":"BBM-KIT-019-27","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023173751166,"sku":"BBM-KIT-019-30","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023173783934,"sku":"BBM-KIT-019-40","price":819.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Starter_Kit_with_Two_IP65_Fittings_in_Brushed_Chrome.jpg?v=1789239876"},{"product_id":"high-cri-relamping-kit-for-an-existing-bathroom-in-matt-white","title":"High CRI Relamping Kit for an Existing Bathroom in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: ten CRI 97 lamps and a trailing edge dimmer, which upgrades a bathroom you already have for a tenth of what new fittings cost.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.9 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023174013310,"sku":"BBM-KIT-022-27","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023174046078,"sku":"BBM-KIT-022-30","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023174078846,"sku":"BBM-KIT-022-40","price":469.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/High_CRI_Relamping_Kit_for_an_Existing_Bathroom_in_Matt_White.jpg?v=1789239738"},{"product_id":"two-basin-lighting-kit-in-brushed-chrome","title":"Two Basin Lighting Kit in Brushed Chrome","description":"\u003cp\u003eA small kit rather than a whole scheme: two mirror bars and two shaver sockets, split so each side switches on its own.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023174406526,"sku":"BBM-KIT-023-27","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023174439294,"sku":"BBM-KIT-023-30","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023174472062,"sku":"BBM-KIT-023-40","price":889.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Two_Basin_Lighting_Kit_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"two-basin-lighting-kit-in-matt-white","title":"Two Basin Lighting Kit in Matt White","description":"\u003cp\u003eA small kit rather than a whole scheme: two mirror bars and two shaver sockets, split so each side switches on its own.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: every fitting in the kit is listed with its cut out and its overall size on the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: sized to the room the kit is named for, at 86 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above, and every fitting in the kit is supplied at the same colour temperature, because a bathroom with two whites in it looks like a mistake\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: a trailing edge dimmer is included where the kit has a dimmable circuit, and it is matched to the total load with 20 per cent headroom\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.3 kilograms for the kit\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eWhy a kit: the fittings match, the drivers are from one family, the total load is inside the dimmer's rating, and it is one delivery and one electrician's visit\u003c\/li\u003e\n\u003cli\u003eSaving: about 10 per cent against the same items bought separately\u003c\/li\u003e\n\u003cli\u003eZone card: a laminated zone diagram is in every kit, which is the thing the electrician will want to see\u003c\/li\u003e\n\u003cli\u003eScale: this is the step between buying one fitting and buying a whole scheme, and it is where most bathroom refreshes actually sit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting listed in the kit name\u003c\/li\u003e\n\u003cli\u003ea matched trailing edge dimmer where applicable\u003c\/li\u003e\n\u003cli\u003eIP65 or IP68 connectors as the positions require\u003c\/li\u003e\n\u003cli\u003ea laminated zone diagram\u003c\/li\u003e\n\u003cli\u003ecut out templates and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, two to four hours depending on the kit. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The zone diagram in the box is dimensioned, so it can be laid on the floor and the positions marked before anything is cut.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere is a real gap in this category between buying one fitting and commissioning a whole scheme, and most bathroom projects sit in it. These kits are that step: matched fittings, one colour temperature, drivers from one family and a dimmer sized to the load, for the price of a couple of hundred pounds over buying the pieces. If the bathroom is being stripped back to brick, buy a scheme instead and get the ceiling plan with it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023174504830,"sku":"BBM-KIT-024-27","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023174537598,"sku":"BBM-KIT-024-30","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023174570366,"sku":"BBM-KIT-024-40","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Two_Basin_Lighting_Kit_in_Matt_White.jpg?v=1789239877"}],"url":"https:\/\/batheandbeam.com\/collections\/kits.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}