{"title":"Fitted By Us","description":"\u003cp\u003eSupplied and installed by a registered electrician. One price covers the fittings, the labour, the Part P notification and the certificates, with old fittings removed and taken away where you have asked. We agree the date in advance and quote anything unexpected before we do it.\u003c\/p\u003e","products":[{"product_id":"installed-bathroom-lighting-package-with-a-registered-electrician-in-matt-black","title":"Installed Bathroom Lighting Package with a Registered Electrician in Matt Black","description":"\u003cp\u003eFitted, not just delivered: the scheme, the electrician, the Part P notification and the certificate, as one price with nothing to arrange.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.6 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023138787710,"sku":"BBM-INS-003-R8","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023138820478,"sku":"BBM-INS-003-R4","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023138853246,"sku":"BBM-INS-003-R14","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Lighting_Package_with_a_Registered_Electrician_in_Matt_Black.jpg?v=1789239744"},{"product_id":"installed-bathroom-package-with-a-demisting-mirror-in-brushed-chrome","title":"Installed Bathroom Package with a Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eFitted, not just delivered: the mirror hung, wired to a spur and tested, which is the part most people would rather not do at the top of a ladder over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.8 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023138886014,"sku":"BBM-INS-004-R8","price":2049.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023138918782,"sku":"BBM-INS-004-R4","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023138951550,"sku":"BBM-INS-004-R14","price":2674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_a_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239748"},{"product_id":"installed-bathroom-package-with-a-demisting-mirror-in-matt-white","title":"Installed Bathroom Package with a Demisting Mirror in Matt White","description":"\u003cp\u003eFitted, not just delivered: the mirror hung, wired to a spur and tested, which is the part most people would rather not do at the top of a ladder over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.3 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023138984318,"sku":"BBM-INS-005-R8","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139017086,"sku":"BBM-INS-005-R4","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139049854,"sku":"BBM-INS-005-R14","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_a_Demisting_Mirror_in_Matt_White.jpg?v=1789239751"},{"product_id":"installed-mirror-cabinet-and-lighting-package-in-brushed-chrome","title":"Installed Mirror Cabinet and Lighting Package in Brushed Chrome","description":"\u003cp\u003eFitted, not just delivered: the cabinet recessed or hung, the lighting fitted and the whole lot certificated.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.4 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023139180926,"sku":"BBM-INS-007-R8","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139213694,"sku":"BBM-INS-007-R4","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139246462,"sku":"BBM-INS-007-R14","price":2949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Mirror_Cabinet_and_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239750"},{"product_id":"installed-mirror-cabinet-and-lighting-package-in-matt-white","title":"Installed Mirror Cabinet and Lighting Package in Matt White","description":"\u003cp\u003eFitted, not just delivered: the cabinet recessed or hung, the lighting fitted and the whole lot certificated.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.8 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023139279230,"sku":"BBM-INS-008-R8","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139311998,"sku":"BBM-INS-008-R4","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139344766,"sku":"BBM-INS-008-R14","price":2674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Mirror_Cabinet_and_Lighting_Package_in_Matt_White.jpg?v=1789239749"},{"product_id":"installed-mirror-cabinet-and-lighting-package-in-matt-black","title":"Installed Mirror Cabinet and Lighting Package in Matt Black","description":"\u003cp\u003eFitted, not just delivered: the cabinet recessed or hung, the lighting fitted and the whole lot certificated.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.4 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023139377534,"sku":"BBM-INS-009-R8","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139410302,"sku":"BBM-INS-009-R4","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139443070,"sku":"BBM-INS-009-R14","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Mirror_Cabinet_and_Lighting_Package_in_Matt_Black.jpg?v=1789239751"},{"product_id":"installed-wet-room-lighting-package-in-brushed-chrome","title":"Installed Wet Room Lighting Package in Brushed Chrome","description":"\u003cp\u003eFitted, not just delivered: a wet room fitted by electricians who have done wet rooms, which is a narrower group than it sounds.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023139475838,"sku":"BBM-INS-010-R8","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139508606,"sku":"BBM-INS-010-R4","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139541374,"sku":"BBM-INS-010-R14","price":3349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Wet_Room_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239750"},{"product_id":"installed-wet-room-lighting-package-in-matt-white","title":"Installed Wet Room Lighting Package in Matt White","description":"\u003cp\u003eFitted, not just delivered: a wet room fitted by electricians who have done wet rooms, which is a narrower group than it sounds.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.3 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023139574142,"sku":"BBM-INS-011-R8","price":2349.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139606910,"sku":"BBM-INS-011-R4","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139639678,"sku":"BBM-INS-011-R14","price":3049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Wet_Room_Lighting_Package_in_Matt_White.jpg?v=1789239751"},{"product_id":"installed-wet-room-lighting-package-in-matt-black","title":"Installed Wet Room Lighting Package in Matt Black","description":"\u003cp\u003eFitted, not just delivered: a wet room fitted by electricians who have done wet rooms, which is a narrower group than it sounds.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023139672446,"sku":"BBM-INS-012-R8","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023139705214,"sku":"BBM-INS-012-R4","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023139737982,"sku":"BBM-INS-012-R14","price":3449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Wet_Room_Lighting_Package_in_Matt_Black.jpg?v=1789239751"},{"product_id":"installed-bathroom-package-with-a-new-circuit-in-matt-white","title":"Installed Bathroom Package with a New Circuit in Matt White","description":"\u003cp\u003eFitted, not just delivered: a new lighting circuit from the consumer unit rather than a spur off the old one, which is what an old bathroom usually needs and rarely gets.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.5 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023140262270,"sku":"BBM-INS-014-R8","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023140295038,"sku":"BBM-INS-014-R4","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023140327806,"sku":"BBM-INS-014-R14","price":2799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_a_New_Circuit_in_Matt_White.jpg?v=1789239749"},{"product_id":"installed-bathroom-package-with-an-extractor-fan-in-brushed-chrome","title":"Installed Bathroom Package with an Extractor Fan in Brushed Chrome","description":"\u003cp\u003eFitted, not just delivered: the fan ducted properly to an outside wall or tile vent rather than into the loft, which is where a distressing proportion of bathroom fans in this country terminate.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023140557182,"sku":"BBM-INS-016-R8","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023140589950,"sku":"BBM-INS-016-R4","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023140622718,"sku":"BBM-INS-016-R14","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_an_Extractor_Fan_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"installed-bathroom-package-with-an-extractor-fan-in-matt-white","title":"Installed Bathroom Package with an Extractor Fan in Matt White","description":"\u003cp\u003eFitted, not just delivered: the fan ducted properly to an outside wall or tile vent rather than into the loft, which is where a distressing proportion of bathroom fans in this country terminate.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.1 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023140655486,"sku":"BBM-INS-017-R8","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023140688254,"sku":"BBM-INS-017-R4","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023140721022,"sku":"BBM-INS-017-R14","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_an_Extractor_Fan_in_Matt_White.jpg?v=1789239750"},{"product_id":"installed-bathroom-package-with-an-extractor-fan-in-matt-black","title":"Installed Bathroom Package with an Extractor Fan in Matt Black","description":"\u003cp\u003eFitted, not just delivered: the fan ducted properly to an outside wall or tile vent rather than into the loft, which is where a distressing proportion of bathroom fans in this country terminate.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.4 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023140753790,"sku":"BBM-INS-018-R8","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023140786558,"sku":"BBM-INS-018-R4","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023140819326,"sku":"BBM-INS-018-R14","price":2599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_an_Extractor_Fan_in_Matt_Black.jpg?v=1789239749"},{"product_id":"installed-circadian-bathroom-package-in-matt-white","title":"Installed Circadian Bathroom Package in Matt White","description":"\u003cp\u003eFitted, not just delivered: the tunable system fitted, the control cable run and the schedule commissioned before the electrician leaves.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.3 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023140950398,"sku":"BBM-INS-020-R8","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023140983166,"sku":"BBM-INS-020-R4","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023141015934,"sku":"BBM-INS-020-R14","price":2924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Circadian_Bathroom_Package_in_Matt_White.jpg?v=1789239752"},{"product_id":"installed-circadian-bathroom-package-in-matt-black","title":"Installed Circadian Bathroom Package in Matt Black","description":"\u003cp\u003eFitted, not just delivered: the tunable system fitted, the control cable run and the schedule commissioned before the electrician leaves.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023141048702,"sku":"BBM-INS-021-R8","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023141081470,"sku":"BBM-INS-021-R4","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023141114238,"sku":"BBM-INS-021-R14","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Circadian_Bathroom_Package_in_Matt_Black.jpg?v=1789239750"},{"product_id":"installed-bathroom-package-with-old-fittings-removed-in-matt-white","title":"Installed Bathroom Package with Old Fittings Removed in Matt White","description":"\u003cp\u003eFitted, not just delivered: the old fittings taken out, the holes made good, the new scheme fitted and the waste taken away with a transfer note.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: as surveyed. A reflected ceiling plan is issued before any work starts\u003c\/li\u003e\n\u003cli\u003eLight output: sized to your room at 200 lux general and 400 lux at the mirror, calculated rather than guessed\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen at survey, matched across every fitting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: included, with the dimmer matched to the total load and 20 per cent headroom left\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 throughout, and the installation is tested and certificated\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, and the installation is to BS 7671 with an Electrical Installation Certificate or a Minor Works Certificate as appropriate\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.0 kilograms of fittings\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver, plus two years on the workmanship\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eSurvey: free within the M25 and within 40 miles of a regional electrician, chargeable beyond and refunded against the order\u003c\/li\u003e\n\u003cli\u003eNotification: Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is.\u003c\/li\u003e\n\u003cli\u003eCertificate: issued on completion and lodged with the scheme provider, which is what a solicitor will ask for when you sell\u003c\/li\u003e\n\u003cli\u003eMaking good: fitting holes cut and made good, and the old fittings taken away with a waste transfer note\u003c\/li\u003e\n\u003cli\u003eLead time: two to four weeks from survey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe survey and a reflected ceiling plan\u003c\/li\u003e\n\u003cli\u003eevery fitting in the scheme\u003c\/li\u003e\n\u003cli\u003ethe labour\u003c\/li\u003e\n\u003cli\u003ethe Part P notification and certificate\u003c\/li\u003e\n\u003cli\u003eremoval of the old fittings\u003c\/li\u003e\n\u003cli\u003eall packaging taken away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, half a day to a full day. They arrive with the plan from the survey, they test the circuit before and after, and they leave the certificate with you rather than posting it later. The notification to building control is made by us.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eBathroom electrical work is notifiable, which is the honest reason to pay somebody. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Uncertificated work in a bathroom is the thing that turns up in a conveyancing search and costs more to regularise than it saved. If you are a competent DIYer replacing a fitting like for like on an existing circuit, buy the fittings and do it yourself with our blessing. If there is a new circuit, a new spur or a new position involved, this is the version to buy.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Family bathroom of 4 to 8 square metres","offer_id":58023141245310,"sku":"BBM-INS-023-R8","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cloakroom or en suite up to 4 square metres","offer_id":58023141278078,"sku":"BBM-INS-023-R4","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Large bathroom or wet room of 8 to 14 square metres","offer_id":58023141310846,"sku":"BBM-INS-023-R14","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Installed_Bathroom_Package_with_Old_Fittings_Removed_in_Matt_White.jpg?v=1789239749"}],"url":"https:\/\/batheandbeam.com\/collections\/installed.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}