{"title":"Extractor Fans With Lighting","description":"\u003cp\u003eLight and extract in one fitting. Approved Document F asks for 15 litres per second in a bathroom and 6 l\/s in a WC-only room, and every fan here states its rate. A humidity-sensing or continuously-running fan will do more for your paint and grout than anything else you buy.\u003c\/p\u003e","products":[{"product_id":"extractor-fan-with-an-integrated-light-in-matt-white","title":"Extractor Fan with an Integrated Light in Matt White","description":"\u003cp\u003eA fan and a light in one hole: one hole in the ceiling instead of two, with the fan and the light on separate feeds so the fan can overrun.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169622398,"sku":"BBM-FAN-001-X1","price":109.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_an_Integrated_Light_in_Matt_White.jpg?v=1789239648"},{"product_id":"extractor-fan-with-an-integrated-light-in-brushed-chrome","title":"Extractor Fan with an Integrated Light in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: one hole in the ceiling instead of two, with the fan and the light on separate feeds so the fan can overrun.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169655166,"sku":"BBM-FAN-002-X1","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_an_Integrated_Light_in_Brushed_Chrome.jpg?v=1789239654"},{"product_id":"extractor-fan-with-a-light-and-a-humidity-sensor-in-matt-white","title":"Extractor Fan with a Light and a Humidity Sensor in Matt White","description":"\u003cp\u003eA fan and a light in one hole: a humidistat that runs the fan when the humidity actually rises rather than when the light goes on, which is both quieter and more effective.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 95 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 95 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: humidity sensed, with an adjustable set point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169687934,"sku":"BBM-FAN-003-X1","price":159.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Humidity_Sensor_in_Matt_White.jpg?v=1789239645"},{"product_id":"extractor-fan-with-a-light-and-a-humidity-sensor-in-brushed-chrome","title":"Extractor Fan with a Light and a Humidity Sensor in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: a humidistat that runs the fan when the humidity actually rises rather than when the light goes on, which is both quieter and more effective.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 95 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 95 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: humidity sensed, with an adjustable set point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169720702,"sku":"BBM-FAN-004-X1","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Humidity_Sensor_in_Brushed_Chrome.jpg?v=1789239661"},{"product_id":"quiet-extractor-fan-with-a-light-at-19db-in-matt-white","title":"Quiet Extractor Fan with a Light at 19dB in Matt White","description":"\u003cp\u003eA fan and a light in one hole: 19dB at three metres, which is quiet enough that people stop switching it off, and a fan that runs is worth more than a fan that is powerful.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 19dB at three metres, which is genuinely quiet\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169753470,"sku":"BBM-FAN-005-X1","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Quiet_Extractor_Fan_with_a_Light_at_19dB_in_Matt_White.jpg?v=1789239865"},{"product_id":"quiet-extractor-fan-with-a-light-at-19db-in-brushed-chrome","title":"Quiet Extractor Fan with a Light at 19dB in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: 19dB at three metres, which is quiet enough that people stop switching it off, and a fan that runs is worth more than a fan that is powerful.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 19dB at three metres, which is genuinely quiet\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169786238,"sku":"BBM-FAN-006-X1","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Quiet_Extractor_Fan_with_a_Light_at_19dB_in_Brushed_Chrome.jpg?v=1789239866"},{"product_id":"extractor-fan-with-a-light-and-a-timer-in-matt-white","title":"Extractor Fan with a Light and a Timer in Matt White","description":"\u003cp\u003eA fan and a light in one hole: an adjustable overrun from one to thirty minutes, which is what building regulations expect on a room with no openable window.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169819006,"sku":"BBM-FAN-007-X1","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Timer_in_Matt_White.jpg?v=1789239647"},{"product_id":"extractor-fan-with-a-light-and-a-timer-in-brushed-chrome","title":"Extractor Fan with a Light and a Timer in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: an adjustable overrun from one to thirty minutes, which is what building regulations expect on a room with no openable window.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169851774,"sku":"BBM-FAN-008-X1","price":139.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Timer_in_Brushed_Chrome.jpg?v=1789239650"},{"product_id":"inline-extractor-fan-kit-with-two-lights-in-matt-white","title":"Inline Extractor Fan Kit with Two Lights in Matt White","description":"\u003cp\u003eA fan and a light in one hole: the motor in the loft and two grilles in the ceiling, which is far quieter than a fan in the room and moves a great deal more air.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 150mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 200 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 200 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169884542,"sku":"BBM-FAN-009-X1","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Inline_Extractor_Fan_Kit_with_Two_Lights_in_Matt_White.jpg?v=1789239750"},{"product_id":"inline-extractor-fan-kit-with-two-lights-in-brushed-chrome","title":"Inline Extractor Fan Kit with Two Lights in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: the motor in the loft and two grilles in the ceiling, which is far quieter than a fan in the room and moves a great deal more air.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 150mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 200 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 200 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169917310,"sku":"BBM-FAN-010-X1","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Inline_Extractor_Fan_Kit_with_Two_Lights_in_Brushed_Chrome.jpg?v=1789239743"},{"product_id":"continuous-running-extractor-fan-with-a-light-in-matt-white","title":"Continuous Running Extractor Fan with a Light in Matt White","description":"\u003cp\u003eA fan and a light in one hole: trickles at 8 litres a second all day and boosts on humidity, which is what a modern airtight house actually needs.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 60 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 60 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169950078,"sku":"BBM-FAN-011-X1","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Continuous_Running_Extractor_Fan_with_a_Light_in_Matt_White.jpg?v=1789239656"},{"product_id":"continuous-running-extractor-fan-with-a-light-in-brushed-chrome","title":"Continuous Running Extractor Fan with a Light in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: trickles at 8 litres a second all day and boosts on humidity, which is what a modern airtight house actually needs.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 60 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 60 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169982846,"sku":"BBM-FAN-012-X1","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Continuous_Running_Extractor_Fan_with_a_Light_in_Brushed_Chrome.jpg?v=1789239657"},{"product_id":"extractor-fan-with-a-light-and-a-pull-cord-in-matt-white","title":"Extractor Fan with a Light and a Pull Cord in Matt White","description":"\u003cp\u003eA fan and a light in one hole: a cord for the boost, for a bathroom with one switch and a fan that should not run every time somebody uses the room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170015614,"sku":"BBM-FAN-013-X1","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Pull_Cord_in_Matt_White.jpg?v=1789239653"},{"product_id":"extractor-fan-with-a-light-and-a-pull-cord-in-brushed-chrome","title":"Extractor Fan with a Light and a Pull Cord in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: a cord for the boost, for a bathroom with one switch and a fan that should not run every time somebody uses the room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170048382,"sku":"BBM-FAN-014-X1","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Pull_Cord_in_Brushed_Chrome.jpg?v=1789239658"},{"product_id":"shower-extractor-fan-with-an-ip65-light-in-matt-white","title":"Shower Extractor Fan with an IP65 Light in Matt White","description":"\u003cp\u003eA fan and a light in one hole: rated for zone 1 so it can go directly above the shower, which is where the steam actually is and where most fans are not allowed.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170081150,"sku":"BBM-FAN-015-X1","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Shower_Extractor_Fan_with_an_IP65_Light_in_Matt_White.jpg?v=1789239876"},{"product_id":"shower-extractor-fan-with-an-ip65-light-in-brushed-chrome","title":"Shower Extractor Fan with an IP65 Light in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: rated for zone 1 so it can go directly above the shower, which is where the steam actually is and where most fans are not allowed.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170113918,"sku":"BBM-FAN-016-X1","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Shower_Extractor_Fan_with_an_IP65_Light_in_Brushed_Chrome.jpg?v=1789239876"},{"product_id":"extractor-fan-with-a-light-and-a-night-mode-in-matt-white","title":"Extractor Fan with a Light and a Night Mode in Matt White","description":"\u003cp\u003eA fan and a light in one hole: the fan drops to trickle and the light to 1 lux amber after midnight.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170146686,"sku":"BBM-FAN-017-X1","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Night_Mode_in_Matt_White.jpg?v=1789239645"},{"product_id":"extractor-fan-with-a-light-and-a-night-mode-in-brushed-chrome","title":"Extractor Fan with a Light and a Night Mode in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: the fan drops to trickle and the light to 1 lux amber after midnight.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023170179454,"sku":"BBM-FAN-018-X1","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Night_Mode_in_Brushed_Chrome.jpg?v=1789239649"}],"url":"https:\/\/batheandbeam.com\/collections\/extractor-fans.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}