{"title":"Emergency Lighting To BS 5266","description":"\u003cp\u003eFittings with an emergency module that keeps a defined light level on a loss of supply. Required in hotels, care homes, student accommodation and commercial washrooms — and the thing most often forgotten until the fire risk assessment.\u003c\/p\u003e","products":[{"product_id":"hotel-bathroom-package-with-emergency-lighting-in-matt-white","title":"Hotel Bathroom Package with Emergency Lighting in Matt White","description":"\u003cp\u003eA contract package: the same package with a three hour maintained emergency luminaire per room and a test schedule, which is what a fire risk assessment will ask for.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 90.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131382142,"sku":"BBM-COM-004-SO","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131414910,"sku":"BBM-COM-004-SI","price":3249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Package_with_Emergency_Lighting_in_Matt_White.jpg?v=1789239747"},{"product_id":"hotel-bathroom-package-with-emergency-lighting-in-matt-black","title":"Hotel Bathroom Package with Emergency Lighting in Matt Black","description":"\u003cp\u003eA contract package: the same package with a three hour maintained emergency luminaire per room and a test schedule, which is what a fire risk assessment will ask for.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 92.4 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023131578750,"sku":"BBM-COM-006-SO","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023131611518,"sku":"BBM-COM-006-SI","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Hotel_Bathroom_Package_with_Emergency_Lighting_in_Matt_Black.jpg?v=1789239736"},{"product_id":"student-accommodation-washroom-package-in-matt-white","title":"Student Accommodation Washroom Package in Matt White","description":"\u003cp\u003eA contract package: vandal resistant IP65 fittings with captive screws, on a maintained emergency circuit, and every part still available in five years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 86.8 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132725630,"sku":"BBM-COM-019-SO","price":2024.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132758398,"sku":"BBM-COM-019-SI","price":2574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Student_Accommodation_Washroom_Package_in_Matt_White.jpg?v=1789239876"},{"product_id":"student-accommodation-washroom-package-in-brushed-chrome","title":"Student Accommodation Washroom Package in Brushed Chrome","description":"\u003cp\u003eA contract package: vandal resistant IP65 fittings with captive screws, on a maintained emergency circuit, and every part still available in five years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 88.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132823934,"sku":"BBM-COM-020-SO","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132856702,"sku":"BBM-COM-020-SI","price":2824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Student_Accommodation_Washroom_Package_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"student-accommodation-washroom-package-in-matt-black","title":"Student Accommodation Washroom Package in Matt Black","description":"\u003cp\u003eA contract package: vandal resistant IP65 fittings with captive screws, on a maintained emergency circuit, and every part still available in five years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2 and outside the zones, which is every position in a domestic bathroom except inside the bath itself\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: per the schedule supplied with the quotation\u003c\/li\u003e\n\u003cli\u003eLight output: sized to 200 lux general and 500 lux at the mirror, which is the CIBSE recommendation for a washroom and the number a specifier will check\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K throughout as standard, batch matched across the whole order\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: DALI 2 addressable, so the scheme can be commissioned and recommissioned without rewiring\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, DALI drivers, with 20 per cent spare capacity designed into every circuit\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS 5266 for the emergency luminaires where fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 88.6 kilograms for the package\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years parts and labour on site, extendable to seven\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eBatch matching: every LED module in one order comes from one bin, within a 3 step MacAdam ellipse, so the rooms match each other\u003c\/li\u003e\n\u003cli\u003eEmergency: three hour maintained to BS 5266 with a monthly and annual test schedule supplied\u003c\/li\u003e\n\u003cli\u003eDocuments: photometric calculations, a lighting schedule, DALI addressing sheet, emergency test log and O and M manual\u003c\/li\u003e\n\u003cli\u003eSpares: every part held in UK stock for ten years\u003c\/li\u003e\n\u003cli\u003eAccount: 30 day terms on approval, and we take purchase orders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery luminaire in the package\u003c\/li\u003e\n\u003cli\u003eDALI drivers and the addressing sheet\u003c\/li\u003e\n\u003cli\u003eemergency luminaires where specified\u003c\/li\u003e\n\u003cli\u003ea photometric calculation for the room\u003c\/li\u003e\n\u003cli\u003ethe lighting schedule and O and M manual\u003c\/li\u003e\n\u003cli\u003ea spares kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation is quoted per site and is usually the right answer, because DALI addressing and emergency commissioning both have to be recorded. Our electricians carry public liability cover, work to your site hours, and issue the test certificates and the O and M manual on completion rather than three weeks later.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThree questions separate a contract supplier from a box shifter. Can you batch match the LEDs so twenty rooms are the same colour. Can you produce a photometric calculation rather than a guess at how many downlights. Will the parts still exist in year six. The answers here are yes, yes and yes, and every one of them is checkable before you place the order.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"Supplied only","offer_id":58023132922238,"sku":"BBM-COM-021-SO","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Supplied and installed by our electricians","offer_id":58023132955006,"sku":"BBM-COM-021-SI","price":2899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Student_Accommodation_Washroom_Package_in_Matt_Black.jpg?v=1789239876"},{"product_id":"ip65-flush-ceiling-light-with-an-emergency-module-in-matt-white","title":"IP65 Flush Ceiling Light with an Emergency Module in Matt White","description":"\u003cp\u003eA surface mounted bathroom light: a three hour maintained emergency module built in, which is what a communal bathroom or a let with a fire risk assessment will need.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm diameter by 60mm deep\u003c\/li\u003e\n\u003cli\u003eLight output: 1500 lumens at 88 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eMounting: surface, onto a ceiling rose position or a joist, with a gasketed base plate\u003c\/li\u003e\n\u003cli\u003eDiffuser: opal polycarbonate, UV stable, which does not yellow the way acrylic does over a decade\u003c\/li\u003e\n\u003cli\u003eSensor: none fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed base plate and gasket\u003c\/li\u003e\n\u003cli\u003efixings for a joist and for plasterboard\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, twenty minutes. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The base plate gasket needs a flat clean ceiling under it, so a textured ceiling wants skimming flat under the fitting or the seal does nothing.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA single flush fitting is the right answer for a great many bathrooms and the trade will always try to sell six downlights instead. One 1450 lumen fitting in the middle of a four square metre bathroom, plus a proper light at the mirror, is better lit than six downlights and costs a fifth as much to install. The case for downlights is a large room, a high ceiling, or a design that wants no visible fitting at all. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023155859838,"sku":"BBM-CEI-010-27","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023155892606,"sku":"BBM-CEI-010-30","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023155925374,"sku":"BBM-CEI-010-40","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Flush_Ceiling_Light_with_an_Emergency_Module_in_Matt_White.jpg?v=1789239812"},{"product_id":"ip65-flush-ceiling-light-with-an-emergency-module-in-matt-black","title":"IP65 Flush Ceiling Light with an Emergency Module in Matt Black","description":"\u003cp\u003eA surface mounted bathroom light: a three hour maintained emergency module built in, which is what a communal bathroom or a let with a fire risk assessment will need.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm diameter by 60mm deep\u003c\/li\u003e\n\u003cli\u003eLight output: 1500 lumens at 88 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting: surface, onto a ceiling rose position or a joist, with a gasketed base plate\u003c\/li\u003e\n\u003cli\u003eDiffuser: opal polycarbonate, UV stable, which does not yellow the way acrylic does over a decade\u003c\/li\u003e\n\u003cli\u003eSensor: none fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed base plate and gasket\u003c\/li\u003e\n\u003cli\u003efixings for a joist and for plasterboard\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, twenty minutes. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The base plate gasket needs a flat clean ceiling under it, so a textured ceiling wants skimming flat under the fitting or the seal does nothing.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA single flush fitting is the right answer for a great many bathrooms and the trade will always try to sell six downlights instead. One 1450 lumen fitting in the middle of a four square metre bathroom, plus a proper light at the mirror, is better lit than six downlights and costs a fifth as much to install. The case for downlights is a large room, a high ceiling, or a design that wants no visible fitting at all. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023156056446,"sku":"BBM-CEI-012-27","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023156089214,"sku":"BBM-CEI-012-30","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023156121982,"sku":"BBM-CEI-012-40","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Flush_Ceiling_Light_with_an_Emergency_Module_in_Matt_Black.jpg?v=1789239811"}],"url":"https:\/\/batheandbeam.com\/collections\/emergency.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}