{"title":"Mirrors With A Demister","description":"\u003cp\u003eA heated pad behind the glass keeps a patch clear after a shower. It costs very little and it is the single most appreciated feature on any mirror we sell. Replacement pads are stocked for ten years.\u003c\/p\u003e","products":[{"product_id":"illuminated-mirror-cabinet-with-a-demister-pad-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Demister Pad in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror cabinet: front lit at face height with a demister pad that covers the whole door rather than a postcard in the middle of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: full door coverage, 60 watts per square metre, switched with the light\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122174334,"sku":"BBM-IMC-001-C80","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122207102,"sku":"BBM-IMC-001-C100","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122239870,"sku":"BBM-IMC-001-C120","price":1574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Demister_Pad_in_Brushed_Chrome.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-a-demister-pad-in-matt-black","title":"Illuminated Mirror Cabinet with a Demister Pad in Matt Black","description":"\u003cp\u003eAn illuminated mirror cabinet: front lit at face height with a demister pad that covers the whole door rather than a postcard in the middle of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: full door coverage, 60 watts per square metre, switched with the light\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122272638,"sku":"BBM-IMC-002-C80","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122305406,"sku":"BBM-IMC-002-C100","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122338174,"sku":"BBM-IMC-002-C120","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Demister_Pad_in_Matt_Black.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-a-demister-pad-in-matt-white","title":"Illuminated Mirror Cabinet with a Demister Pad in Matt White","description":"\u003cp\u003eAn illuminated mirror cabinet: front lit at face height with a demister pad that covers the whole door rather than a postcard in the middle of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 145mm, and the recessed version needs a 105mm cavity\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, which is 320 lux at the face from 400mm and is the figure that matters\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white on the front lighting as standard, which is the right temperature for a face, with a tunable option on some models\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: not dimmable as standard. A mirror light that dims is a mirror light somebody has left on 20 per cent and then complained about\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur. Not supplied with a plug, because a plug in a bathroom is not lawful\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eDemister pad: full door coverage, 60 watts per square metre, switched with the light\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium, not MDF. An MDF bathroom cabinet swells at the bottom edge within five years and there is no repairing it\u003c\/li\u003e\n\u003cli\u003eMirror: 4mm silvered float glass, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: surface mounted on a French cleat, which is a great deal easier to get level than four screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat or the recessing frame\u003c\/li\u003e\n\u003cli\u003efixings for masonry and for stud\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe electrical connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the connection, and two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The cabinet hangs on a French cleat, which means you level one batten rather than four screws, and the recessed version needs its frame in before the plasterboard, so it is a decision made early or not at all.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe question that decides this purchase is where the light is. Front lit means a lit panel each side of the mirror at face height, and it is the only arrangement that lights a face evenly with no shadow under the eyes and the chin. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. Everything on this page is front lit, and where a model also has a backlight it is on a separate switch and described as ambient rather than as task light.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023122403710,"sku":"BBM-IMC-003-C80","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023122436478,"sku":"BBM-IMC-003-C100","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023122469246,"sku":"BBM-IMC-003-C120","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Demister_Pad_in_Matt_White.jpg?v=1789239730"},{"product_id":"front-lit-demisting-mirror-in-brushed-chrome","title":"Front Lit Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126696318,"sku":"BBM-LDM-001-M68","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126729086,"sku":"BBM-LDM-001-M88","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023126761854,"sku":"BBM-LDM-001-M108","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"front-lit-demisting-mirror-in-matt-black","title":"Front Lit Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126827390,"sku":"BBM-LDM-002-M68","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126860158,"sku":"BBM-LDM-002-M88","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023126892926,"sku":"BBM-LDM-002-M108","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Matt_Black.jpg?v=1789239741"},{"product_id":"front-lit-demisting-mirror-in-brushed-brass","title":"Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126958462,"sku":"BBM-LDM-003-M68","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126991230,"sku":"BBM-LDM-003-M88","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127023998,"sku":"BBM-LDM-003-M108","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239742"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-chrome","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127089534,"sku":"BBM-LDM-004-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127122302,"sku":"BBM-LDM-004-M88","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127155070,"sku":"BBM-LDM-004-M108","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Chrome.jpg?v=1789239743"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-brass","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127351678,"sku":"BBM-LDM-006-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127384446,"sku":"BBM-LDM-006-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127417214,"sku":"BBM-LDM-006-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Brass.jpg?v=1789239740"},{"product_id":"demisting-mirror-with-front-and-ambient-lighting-in-matt-black","title":"Demisting Mirror with Front and Ambient Lighting in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a front lit panel for the face and a separate halo for the room, on two switches.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127613822,"sku":"BBM-LDM-008-M68","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127646590,"sku":"BBM-LDM-008-M88","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127679358,"sku":"BBM-LDM-008-M108","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_Front_and_Ambient_Lighting_in_Matt_Black.jpg?v=1789239659"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-chrome","title":"Round Front Lit Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127875966,"sku":"BBM-LDM-010-M68","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127908734,"sku":"BBM-LDM-010-M88","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127941502,"sku":"BBM-LDM-010-M108","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239868"},{"product_id":"round-front-lit-demisting-mirror-in-matt-black","title":"Round Front Lit Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127974270,"sku":"BBM-LDM-011-M68","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128007038,"sku":"BBM-LDM-011-M88","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128039806,"sku":"BBM-LDM-011-M108","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Matt_Black.jpg?v=1789239867"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-brass","title":"Round Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128105342,"sku":"BBM-LDM-012-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128138110,"sku":"BBM-LDM-012-M88","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128170878,"sku":"BBM-LDM-012-M108","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239868"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-chrome","title":"Demisting Mirror with a Magnifying Insert in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128236414,"sku":"BBM-LDM-013-M68","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128269182,"sku":"BBM-LDM-013-M88","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128301950,"sku":"BBM-LDM-013-M108","price":1924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Chrome.jpg?v=1789239660"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-brass","title":"Demisting Mirror with a Magnifying Insert in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128629630,"sku":"BBM-LDM-015-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128662398,"sku":"BBM-LDM-015-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128695166,"sku":"BBM-LDM-015-M108","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Brass.jpg?v=1789239654"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-chrome","title":"Landscape Demisting Mirror for Two Basins in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128826238,"sku":"BBM-LDM-016-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128859006,"sku":"BBM-LDM-016-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128891774,"sku":"BBM-LDM-016-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-matt-black","title":"Landscape Demisting Mirror for Two Basins in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128957310,"sku":"BBM-LDM-017-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128990078,"sku":"BBM-LDM-017-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129022846,"sku":"BBM-LDM-017-M108","price":2424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Matt_Black.jpg?v=1789239875"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-brass","title":"Landscape Demisting Mirror for Two Basins in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129088382,"sku":"BBM-LDM-018-M68","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129121150,"sku":"BBM-LDM-018-M88","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129153918,"sku":"BBM-LDM-018-M108","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Brass.jpg?v=1789239866"},{"product_id":"demisting-mirror-with-a-clock-and-temperature-display-in-matt-black","title":"Demisting Mirror with a Clock and Temperature Display in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a discreet display in the corner of the glass, which is either the best or the worst thing in this shop depending entirely on who you are.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129317758,"sku":"BBM-LDM-020-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129350526,"sku":"BBM-LDM-020-M88","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129383294,"sku":"BBM-LDM-020-M108","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Clock_and_Temperature_Display_in_Matt_Black.jpg?v=1789239659"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-chrome","title":"Demisting Mirror with a Metal Frame in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129645438,"sku":"BBM-LDM-022-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129678206,"sku":"BBM-LDM-022-M88","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129710974,"sku":"BBM-LDM-022-M108","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Chrome.jpg?v=1789239659"},{"product_id":"demisting-mirror-with-a-metal-frame-in-matt-black","title":"Demisting Mirror with a Metal Frame in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129776510,"sku":"BBM-LDM-023-M68","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129809278,"sku":"BBM-LDM-023-M88","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129842046,"sku":"BBM-LDM-023-M108","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Matt_Black.jpg?v=1789239658"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-brass","title":"Demisting Mirror with a Metal Frame in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129907582,"sku":"BBM-LDM-024-M68","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129940350,"sku":"BBM-LDM-024-M88","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129973118,"sku":"BBM-LDM-024-M108","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Brass.jpg?v=1789239652"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-matt-black","title":"Demisting Mirror with a Shaver Socket in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130169726,"sku":"BBM-LDM-026-M68","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130202494,"sku":"BBM-LDM-026-M88","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130235262,"sku":"BBM-LDM-026-M108","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239661"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-brushed-brass","title":"Demisting Mirror with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130300798,"sku":"BBM-LDM-027-M68","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130333566,"sku":"BBM-LDM-027-M88","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130366334,"sku":"BBM-LDM-027-M108","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239657"},{"product_id":"full-height-demisting-mirror-in-brushed-chrome","title":"Full Height Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130464638,"sku":"BBM-LDM-028-M68","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130497406,"sku":"BBM-LDM-028-M88","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130530174,"sku":"BBM-LDM-028-M108","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239740"},{"product_id":"full-height-demisting-mirror-in-matt-black","title":"Full Height Demisting Mirror in Matt Black","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130857854,"sku":"BBM-LDM-029-M68","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130890622,"sku":"BBM-LDM-029-M88","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130923390,"sku":"BBM-LDM-029-M108","price":2574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Matt_Black.jpg?v=1789239735"},{"product_id":"full-height-demisting-mirror-in-brushed-brass","title":"Full Height Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 36.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130988926,"sku":"BBM-LDM-030-M68","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023131021694,"sku":"BBM-LDM-030-M88","price":2724.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023131054462,"sku":"BBM-LDM-030-M108","price":3224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239741"},{"product_id":"illuminated-mirror-cabinet-with-bluetooth-audio-in-matt-black","title":"Illuminated Mirror Cabinet with Bluetooth Audio in Matt Black","description":"\u003cp\u003eA cabinet that does more than store things: an exciter driving the glass itself rather than a speaker behind a grille, so there is nothing for water to get into.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eAudio: a glass exciter rather than a cone speaker, so there is no grille and nothing for water to enter. It is not a hi fi and we will not pretend it is, but it is a great deal better than a phone on a windowsill\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023147405694,"sku":"BBM-ICA-002-C80","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023147438462,"sku":"BBM-ICA-002-C100","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023147471230,"sku":"BBM-ICA-002-C120","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Bluetooth_Audio_in_Matt_Black.jpg?v=1789239740"},{"product_id":"illuminated-mirror-cabinet-with-bluetooth-audio-in-matt-white","title":"Illuminated Mirror Cabinet with Bluetooth Audio in Matt White","description":"\u003cp\u003eA cabinet that does more than store things: an exciter driving the glass itself rather than a speaker behind a grille, so there is nothing for water to get into.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eAudio: a glass exciter rather than a cone speaker, so there is no grille and nothing for water to enter. It is not a hi fi and we will not pretend it is, but it is a great deal better than a phone on a windowsill\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023147503998,"sku":"BBM-ICA-003-C80","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023147536766,"sku":"BBM-ICA-003-C100","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023147569534,"sku":"BBM-ICA-003-C120","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Bluetooth_Audio_in_Matt_White.jpg?v=1789239745"},{"product_id":"illuminated-mirror-cabinet-with-audio-and-a-demister-in-brushed-chrome","title":"Illuminated Mirror Cabinet with Audio and a Demister in Brushed Chrome","description":"\u003cp\u003eA cabinet that does more than store things: the audio version with a full door demister pad.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eAudio: a glass exciter rather than a cone speaker, so there is no grille and nothing for water to enter. It is not a hi fi and we will not pretend it is, but it is a great deal better than a phone on a windowsill\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023147602302,"sku":"BBM-ICA-004-C80","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023147635070,"sku":"BBM-ICA-004-C100","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023147667838,"sku":"BBM-ICA-004-C120","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Audio_and_a_Demister_in_Brushed_Chrome.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-audio-and-a-demister-in-matt-black","title":"Illuminated Mirror Cabinet with Audio and a Demister in Matt Black","description":"\u003cp\u003eA cabinet that does more than store things: the audio version with a full door demister pad.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eAudio: a glass exciter rather than a cone speaker, so there is no grille and nothing for water to enter. It is not a hi fi and we will not pretend it is, but it is a great deal better than a phone on a windowsill\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023147700606,"sku":"BBM-ICA-005-C80","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023147733374,"sku":"BBM-ICA-005-C100","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023147766142,"sku":"BBM-ICA-005-C120","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Audio_and_a_Demister_in_Matt_Black.jpg?v=1789239748"},{"product_id":"illuminated-mirror-cabinet-with-audio-and-a-demister-in-matt-white","title":"Illuminated Mirror Cabinet with Audio and a Demister in Matt White","description":"\u003cp\u003eA cabinet that does more than store things: the audio version with a full door demister pad.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eAudio: a glass exciter rather than a cone speaker, so there is no grille and nothing for water to enter. It is not a hi fi and we will not pretend it is, but it is a great deal better than a phone on a windowsill\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023147798910,"sku":"BBM-ICA-006-C80","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023147831678,"sku":"BBM-ICA-006-C100","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023147864446,"sku":"BBM-ICA-006-C120","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Audio_and_a_Demister_in_Matt_White.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-wireless-charging-in-matt-black","title":"Illuminated Mirror Cabinet with Wireless Charging in Matt Black","description":"\u003cp\u003eA cabinet that does more than store things: a 15W wireless charging pad on the middle shelf, on an isolated SELV supply, which is what makes it lawful in a bathroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 32.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: 15W Qi pad on the middle shelf, SELV isolated\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023147995518,"sku":"BBM-ICA-008-C80","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148028286,"sku":"BBM-ICA-008-C100","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148061054,"sku":"BBM-ICA-008-C120","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Wireless_Charging_in_Matt_Black.jpg?v=1789239742"},{"product_id":"illuminated-mirror-cabinet-with-wireless-charging-in-matt-white","title":"Illuminated Mirror Cabinet with Wireless Charging in Matt White","description":"\u003cp\u003eA cabinet that does more than store things: a 15W wireless charging pad on the middle shelf, on an isolated SELV supply, which is what makes it lawful in a bathroom.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: 15W Qi pad on the middle shelf, SELV isolated\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148093822,"sku":"BBM-ICA-009-C80","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148126590,"sku":"BBM-ICA-009-C100","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148159358,"sku":"BBM-ICA-009-C120","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Wireless_Charging_in_Matt_White.jpg?v=1789239740"},{"product_id":"illuminated-mirror-cabinet-with-a-shaver-socket-and-usb-c-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Shaver Socket and USB C in Brushed Chrome","description":"\u003cp\u003eA cabinet that does more than store things: a dual voltage shaver socket and a 30W USB C outlet inside the cabinet, both isolated.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: 30W USB C, SELV isolated\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148192126,"sku":"BBM-ICA-010-C80","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148224894,"sku":"BBM-ICA-010-C100","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148257662,"sku":"BBM-ICA-010-C120","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Shaver_Socket_and_USB_C_in_Brushed_Chrome.jpg?v=1789239747"},{"product_id":"illuminated-mirror-cabinet-with-a-shaver-socket-and-usb-c-in-matt-black","title":"Illuminated Mirror Cabinet with a Shaver Socket and USB C in Matt Black","description":"\u003cp\u003eA cabinet that does more than store things: a dual voltage shaver socket and a 30W USB C outlet inside the cabinet, both isolated.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: 30W USB C, SELV isolated\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148290430,"sku":"BBM-ICA-011-C80","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148323198,"sku":"BBM-ICA-011-C100","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148355966,"sku":"BBM-ICA-011-C120","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Shaver_Socket_and_USB_C_in_Matt_Black.jpg?v=1789239745"},{"product_id":"illuminated-mirror-cabinet-with-a-shaver-socket-and-usb-c-in-matt-white","title":"Illuminated Mirror Cabinet with a Shaver Socket and USB C in Matt White","description":"\u003cp\u003eA cabinet that does more than store things: a dual voltage shaver socket and a 30W USB C outlet inside the cabinet, both isolated.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 30.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: 30W USB C, SELV isolated\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148388734,"sku":"BBM-ICA-012-C80","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148421502,"sku":"BBM-ICA-012-C100","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148454270,"sku":"BBM-ICA-012-C120","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Shaver_Socket_and_USB_C_in_Matt_White.jpg?v=1789239746"},{"product_id":"illuminated-mirror-cabinet-with-a-motion-sensed-interior-light-in-brushed-chrome","title":"Illuminated Mirror Cabinet with a Motion Sensed Interior Light in Brushed Chrome","description":"\u003cp\u003eA cabinet that does more than store things: an interior strip that comes on when a door opens, which is the small thing you notice every day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148487038,"sku":"BBM-ICA-013-C80","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148519806,"sku":"BBM-ICA-013-C100","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148552574,"sku":"BBM-ICA-013-C120","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Motion_Sensed_Interior_Light_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"illuminated-mirror-cabinet-with-a-motion-sensed-interior-light-in-matt-black","title":"Illuminated Mirror Cabinet with a Motion Sensed Interior Light in Matt Black","description":"\u003cp\u003eA cabinet that does more than store things: an interior strip that comes on when a door opens, which is the small thing you notice every day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148585342,"sku":"BBM-ICA-014-C80","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148618110,"sku":"BBM-ICA-014-C100","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148650878,"sku":"BBM-ICA-014-C120","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Motion_Sensed_Interior_Light_in_Matt_Black.jpg?v=1789239744"},{"product_id":"illuminated-mirror-cabinet-with-a-motion-sensed-interior-light-in-matt-white","title":"Illuminated Mirror Cabinet with a Motion Sensed Interior Light in Matt White","description":"\u003cp\u003eA cabinet that does more than store things: an interior strip that comes on when a door opens, which is the small thing you notice every day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eAudio: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148683646,"sku":"BBM-ICA-015-C80","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023148716414,"sku":"BBM-ICA-015-C100","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023148749182,"sku":"BBM-ICA-015-C120","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_a_Motion_Sensed_Interior_Light_in_Matt_White.jpg?v=1789239734"},{"product_id":"illuminated-mirror-cabinet-with-audio-and-tunable-lighting-in-matt-white","title":"Illuminated Mirror Cabinet with Audio and Tunable Lighting in Matt White","description":"\u003cp\u003eA cabinet that does more than store things: audio, a demister and 2700K to 5000K front lighting, which is everything this format can usefully do.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 148mm\u003c\/li\u003e\n\u003cli\u003eLight output: 1450 lumens from the front lighting at 82 lumens per circuit watt, giving 320 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K as standard, or tunable on the model that says so\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur. Every socket and charging point inside the cabinet is on an isolating transformer to BS EN 61558-2-5, which is the only lawful way to have one in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eAudio: a glass exciter rather than a cone speaker, so there is no grille and nothing for water to enter. It is not a hi fi and we will not pretend it is, but it is a great deal better than a phone on a windowsill\u003c\/li\u003e\n\u003cli\u003eCharging: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eCarcass: aluminium throughout, not MDF\u003c\/li\u003e\n\u003cli\u003eBluetooth: pairs without an app and remembers four devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe cabinet, assembled\u003c\/li\u003e\n\u003cli\u003ethe French cleat and fixings\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003ea pairing card and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur, two people for the lift. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Everything electrical inside the cabinet runs at SELV off an isolating transformer, so nothing at mains voltage is exposed behind a door that a wet hand will open.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThe features on this page are worth having in exactly one order. The demister first, because a mirror you cannot see into has failed at its only job. The charging second, because it moves the toothbrush and the razor off the basin and into a cupboard. The audio last, because it is genuinely pleasant and it is the first thing that will stop working in year eight. Buy in that order and stop where the money runs out.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"800mm and two doors","offer_id":58023148978558,"sku":"BBM-ICA-018-C80","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"1000mm and three doors","offer_id":58023149011326,"sku":"BBM-ICA-018-C100","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"1200mm and three doors","offer_id":58023149044094,"sku":"BBM-ICA-018-C120","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_Cabinet_with_Audio_and_Tunable_Lighting_in_Matt_White.jpg?v=1789239744"},{"product_id":"front-lit-illuminated-mirror-with-a-demister-in-brushed-chrome","title":"Front Lit Illuminated Mirror with a Demister in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: front lighting plus a heated pad covering 80 per cent of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: 80 per cent coverage, switched with the light. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162872190,"sku":"BBM-MIR-009-M68","price":399.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162904958,"sku":"BBM-MIR-009-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162937726,"sku":"BBM-MIR-009-M88","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162970494,"sku":"BBM-MIR-009-M108","price":569.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_with_a_Demister_in_Brushed_Chrome.jpg?v=1789239745"},{"product_id":"front-lit-illuminated-mirror-with-a-demister-in-matt-black","title":"Front Lit Illuminated Mirror with a Demister in Matt Black","description":"\u003cp\u003eAn illuminated mirror: front lighting plus a heated pad covering 80 per cent of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: 80 per cent coverage, switched with the light. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163003262,"sku":"BBM-MIR-010-M68","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163036030,"sku":"BBM-MIR-010-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163068798,"sku":"BBM-MIR-010-M88","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163101566,"sku":"BBM-MIR-010-M108","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_with_a_Demister_in_Matt_Black.jpg?v=1789239745"}],"url":"https:\/\/batheandbeam.com\/collections\/demister.oembed?page=2","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}