{"title":"Solid And Plated Brass","description":"\u003cp\u003eBrushed and unlacquered brass, warm against the amber end of the colour range and the finish that ages rather than fails. Best kept out of a wet room unless the listing says it is rated for one.\u003c\/p\u003e","products":[{"product_id":"marine-grade-wet-room-lighting-package-in-brushed-chrome","title":"Marine Grade Wet Room Lighting Package in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless throughout, because a wet room is wet all day and 304 stainless will tea stain in a couple of years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023118700926,"sku":"BBM-WRP-001-27","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023118733694,"sku":"BBM-WRP-001-30","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023118766462,"sku":"BBM-WRP-001-40","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_Wet_Room_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239864"},{"product_id":"marine-grade-wet-room-lighting-package-in-matt-black","title":"Marine Grade Wet Room Lighting Package in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless throughout, because a wet room is wet all day and 304 stainless will tea stain in a couple of years.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023118930302,"sku":"BBM-WRP-003-27","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023118963070,"sku":"BBM-WRP-003-30","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023118995838,"sku":"BBM-WRP-003-40","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_Wet_Room_Lighting_Package_in_Matt_Black.jpg?v=1789239868"},{"product_id":"wet-room-lighting-package-with-zone-0-floor-lights-in-brushed-chrome","title":"Wet Room Lighting Package with Zone 0 Floor Lights in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: IP67 SELV floor lights inside the shower area itself, running at 12 volts with the transformer outside the zones, which is the only lawful way to put a light there.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 0, which is inside the bath or the shower tray itself. A fitting here must be IP67 and must run at SELV, meaning 12 volts or less with the transformer outside the zones\u003c\/li\u003e\n\u003cli\u003eIP rating: IP67. Dust tight and protected against temporary immersion in up to a metre of water, which is what zone 0 requires and what a fitting in a shower tray or a bath surround has to be\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: SELV, 12 volts, with the transformer sited outside the zones. This is what makes the fitting legal in zone 0 and it is not optional\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119061374,"sku":"BBM-WRP-004-27","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119094142,"sku":"BBM-WRP-004-30","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119126910,"sku":"BBM-WRP-004-40","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_Zone_0_Floor_Lights_in_Brushed_Chrome.jpg?v=1789239874"},{"product_id":"wet-room-lighting-package-with-zone-0-floor-lights-in-matt-black","title":"Wet Room Lighting Package with Zone 0 Floor Lights in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: IP67 SELV floor lights inside the shower area itself, running at 12 volts with the transformer outside the zones, which is the only lawful way to put a light there.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 0, which is inside the bath or the shower tray itself. A fitting here must be IP67 and must run at SELV, meaning 12 volts or less with the transformer outside the zones\u003c\/li\u003e\n\u003cli\u003eIP rating: IP67. Dust tight and protected against temporary immersion in up to a metre of water, which is what zone 0 requires and what a fitting in a shower tray or a bath surround has to be\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: SELV, 12 volts, with the transformer sited outside the zones. This is what makes the fitting legal in zone 0 and it is not optional\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119323518,"sku":"BBM-WRP-006-27","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119356286,"sku":"BBM-WRP-006-30","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119389054,"sku":"BBM-WRP-006-40","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_Zone_0_Floor_Lights_in_Matt_Black.jpg?v=1789239876"},{"product_id":"steam-room-lighting-package-in-brushed-chrome","title":"Steam Room Lighting Package in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 60 degrees ambient with silicone gaskets rather than nitrile, because a nitrile gasket in a steam room hardens and lets water in within a season.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 60 degrees, which is a steam room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119421822,"sku":"BBM-WRP-007-27","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119454590,"sku":"BBM-WRP-007-30","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119487358,"sku":"BBM-WRP-007-40","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Steam_Room_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239873"},{"product_id":"steam-room-lighting-package-in-matt-black","title":"Steam Room Lighting Package in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 60 degrees ambient with silicone gaskets rather than nitrile, because a nitrile gasket in a steam room hardens and lets water in within a season.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 60 degrees, which is a steam room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023119683966,"sku":"BBM-WRP-009-27","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023119716734,"sku":"BBM-WRP-009-30","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023119749502,"sku":"BBM-WRP-009-40","price":2424.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Steam_Room_Lighting_Package_in_Matt_Black.jpg?v=1789239874"},{"product_id":"wet-room-lighting-package-with-a-recessed-shower-light-in-matt-black","title":"Wet Room Lighting Package with a Recessed Shower Light in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: a flush IP65 light directly over the shower with a tempered glass lens and a captive gasket, so it can be cleaned without dropping the lens.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120077182,"sku":"BBM-WRP-012-27","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120109950,"sku":"BBM-WRP-012-30","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120142718,"sku":"BBM-WRP-012-40","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Recessed_Shower_Light_in_Matt_Black.jpg?v=1789239877"},{"product_id":"wet-room-package-with-coloured-mood-lighting-in-brushed-chrome","title":"Wet Room Package with Coloured Mood Lighting in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: an IP67 RGBW tape in the shower recess on a separate SELV driver, which is the one place colour changing light is not a gimmick.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120175486,"sku":"BBM-WRP-013-27","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120208254,"sku":"BBM-WRP-013-30","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120241022,"sku":"BBM-WRP-013-40","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_with_Coloured_Mood_Lighting_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"wet-room-package-with-coloured-mood-lighting-in-matt-black","title":"Wet Room Package with Coloured Mood Lighting in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: an IP67 RGBW tape in the shower recess on a separate SELV driver, which is the one place colour changing light is not a gimmick.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120437630,"sku":"BBM-WRP-015-27","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120470398,"sku":"BBM-WRP-015-30","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120503166,"sku":"BBM-WRP-015-40","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_with_Coloured_Mood_Lighting_in_Matt_Black.jpg?v=1789239877"},{"product_id":"wet-room-lighting-package-with-a-demisting-mirror-in-brushed-chrome","title":"Wet Room Lighting Package with a Demisting Mirror in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: a wet room package with a mirror rated for the humidity a wet room actually reaches, which is not the same specification as a bathroom mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120568702,"sku":"BBM-WRP-016-27","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120601470,"sku":"BBM-WRP-016-30","price":2249.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120634238,"sku":"BBM-WRP-016-40","price":2249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Demisting_Mirror_in_Brushed_Chrome.jpg?v=1789239875"},{"product_id":"wet-room-lighting-package-with-a-demisting-mirror-in-matt-black","title":"Wet Room Lighting Package with a Demisting Mirror in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: a wet room package with a mirror rated for the humidity a wet room actually reaches, which is not the same specification as a bathroom mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120830846,"sku":"BBM-WRP-018-27","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120863614,"sku":"BBM-WRP-018-30","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023120896382,"sku":"BBM-WRP-018-40","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_a_Demisting_Mirror_in_Matt_Black.jpg?v=1789239876"},{"product_id":"sauna-lighting-package-in-brushed-chrome","title":"Sauna Lighting Package in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 125 degrees with ceramic terminal blocks and no plastic in the hot zone, plus a shielded backrest light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 125 degrees on the sauna fittings\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023120961918,"sku":"BBM-WRP-019-27","price":2049.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023120994686,"sku":"BBM-WRP-019-30","price":2049.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121027454,"sku":"BBM-WRP-019-40","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Sauna_Lighting_Package_in_Brushed_Chrome.jpg?v=1789239876"},{"product_id":"sauna-lighting-package-in-matt-black","title":"Sauna Lighting Package in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: fittings rated to 125 degrees with ceramic terminal blocks and no plastic in the hot zone, plus a shielded backrest light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 125 degrees on the sauna fittings\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121289598,"sku":"BBM-WRP-021-27","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121322366,"sku":"BBM-WRP-021-30","price":2124.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121355134,"sku":"BBM-WRP-021-40","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Sauna_Lighting_Package_in_Matt_Black.jpg?v=1789239870"},{"product_id":"wet-room-package-for-a-coastal-house-in-brushed-chrome","title":"Wet Room Package for a Coastal House in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless, marine grade gaskets and a salt spray tested finish to BS EN ISO 9227, for a house within a mile of the sea where ordinary chrome pits inside two winters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121420670,"sku":"BBM-WRP-022-27","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121453438,"sku":"BBM-WRP-022-30","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121486206,"sku":"BBM-WRP-022-40","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_for_a_Coastal_House_in_Brushed_Chrome.jpg?v=1789239877"},{"product_id":"wet-room-package-for-a-coastal-house-in-matt-black","title":"Wet Room Package for a Coastal House in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: 316 stainless, marine grade gaskets and a salt spray tested finish to BS EN ISO 9227, for a house within a mile of the sea where ordinary chrome pits inside two winters.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121650046,"sku":"BBM-WRP-024-27","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121682814,"sku":"BBM-WRP-024-30","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121715582,"sku":"BBM-WRP-024-40","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Package_for_a_Coastal_House_in_Matt_Black.jpg?v=1789239876"},{"product_id":"wet-room-lighting-package-with-an-extract-system-in-brushed-chrome","title":"Wet Room Lighting Package with an Extract System in Brushed Chrome","description":"\u003cp\u003eFor a room that is wet all day: the lights and a continuous running extract unit specified together, sized to the room volume, because a wet room without proper extract destroys its own ceiling.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023121781118,"sku":"BBM-WRP-025-27","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023121813886,"sku":"BBM-WRP-025-30","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023121846654,"sku":"BBM-WRP-025-40","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_an_Extract_System_in_Brushed_Chrome.jpg?v=1789239875"},{"product_id":"wet-room-lighting-package-with-an-extract-system-in-matt-black","title":"Wet Room Lighting Package with an Extract System in Matt Black","description":"\u003cp\u003eFor a room that is wet all day: the lights and a continuous running extract unit specified together, sized to the room volume, because a wet room without proper extract destroys its own ceiling.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by fitting, and every one is listed with its cut out and its overall diameter in the pack list\u003c\/li\u003e\n\u003cli\u003eLight output: 4200 lumens across the package at 86 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, and the SELV circuits dim on the transformer rather than on the mains side, which is what stops a 12 volt fitting flickering at the bottom of the dial\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: fire rated to 30, 60 and 90 minutes, tested to BS 476 Part 21 in both plasterboard and timber joist constructions, and the test certificate is downloadable from this page\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus IP testing to BS EN 60529 with a certificate on file\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: seven years on the fitting, the LED module and the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eCorrosion: triple plated over brass, salt spray tested to 500 hours\u003c\/li\u003e\n\u003cli\u003eGaskets: silicone, captive, and replaceable without removing the fitting\u003c\/li\u003e\n\u003cli\u003eAmbient rating: 45 degrees, which is a wet room specification\u003c\/li\u003e\n\u003cli\u003eDrainage: every recessed fitting is drilled and gasketed so condensate cannot pool on the lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eevery fitting in the package\u003c\/li\u003e\n\u003cli\u003ethe SELV transformer where required\u003c\/li\u003e\n\u003cli\u003eIP68 rated gel filled connectors\u003c\/li\u003e\n\u003cli\u003esilicone gaskets and spare gaskets\u003c\/li\u003e\n\u003cli\u003ea zone drawing for your room\u003c\/li\u003e\n\u003cli\u003eIP test certificates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. On a wet room the two things that matter are the transformer position for any SELV circuit, which must be outside the zones, and the gasket seating, which has to be clean and dry when the fitting goes in. A gasket compressed onto a speck of plaster leaks for the rest of its life.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA wet room is not a bathroom with more tiles. The humidity is higher for longer, the fittings are wetted directly rather than splashed, and the corrosion problem is real: 304 stainless, which is what most of the trade sells as stainless, will show orange tea staining within two or three years in a wet room and looks like rust because it is. Everything on this page is 316 or triple plated brass, and we state the salt spray hours rather than the word stainless.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023122043262,"sku":"BBM-WRP-027-27","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023122076030,"sku":"BBM-WRP-027-30","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023122108798,"sku":"BBM-WRP-027-40","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Wet_Room_Lighting_Package_with_an_Extract_System_in_Matt_Black.jpg?v=1789239876"},{"product_id":"front-lit-demisting-mirror-in-brushed-brass","title":"Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: vertical lit panels each side at face height, which is the arrangement that lights a face rather than a wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023126958462,"sku":"BBM-LDM-003-M68","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023126991230,"sku":"BBM-LDM-003-M88","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127023998,"sku":"BBM-LDM-003-M108","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239742"},{"product_id":"front-lit-demisting-mirror-with-tunable-lighting-in-brushed-brass","title":"Front Lit Demisting Mirror with Tunable Lighting in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: 2700K to 5000K on a touch control, warm for the evening and daylight for makeup.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K to 5000K tunable on a touch control, and it remembers the last setting\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023127351678,"sku":"BBM-LDM-006-M68","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023127384446,"sku":"BBM-LDM-006-M88","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023127417214,"sku":"BBM-LDM-006-M108","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Demisting_Mirror_with_Tunable_Lighting_in_Brushed_Brass.jpg?v=1789239740"},{"product_id":"round-front-lit-demisting-mirror-in-brushed-brass","title":"Round Front Lit Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a round mirror with the lit panels at the three and nine o'clock positions, which is the only way a round mirror lights a face properly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128105342,"sku":"BBM-LDM-012-M68","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128138110,"sku":"BBM-LDM-012-M88","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128170878,"sku":"BBM-LDM-012-M108","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Front_Lit_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239868"},{"product_id":"demisting-mirror-with-a-magnifying-insert-in-brushed-brass","title":"Demisting Mirror with a Magnifying Insert in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a five times magnifying circle set into the main glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023128629630,"sku":"BBM-LDM-015-M68","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023128662398,"sku":"BBM-LDM-015-M88","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023128695166,"sku":"BBM-LDM-015-M108","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Magnifying_Insert_in_Brushed_Brass.jpg?v=1789239654"},{"product_id":"landscape-demisting-mirror-for-two-basins-in-brushed-brass","title":"Landscape Demisting Mirror for Two Basins in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a wide mirror with three lit panels so both basins get face light rather than one getting it and one getting a reflection of it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 34.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129088382,"sku":"BBM-LDM-018-M68","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129121150,"sku":"BBM-LDM-018-M88","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129153918,"sku":"BBM-LDM-018-M108","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Landscape_Demisting_Mirror_for_Two_Basins_in_Brushed_Brass.jpg?v=1789239866"},{"product_id":"demisting-mirror-with-a-metal-frame-in-brushed-brass","title":"Demisting Mirror with a Metal Frame in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 12mm metal frame around the glass, which is the detail that stops an illuminated mirror looking like a screen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023129907582,"sku":"BBM-LDM-024-M68","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023129940350,"sku":"BBM-LDM-024-M88","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023129973118,"sku":"BBM-LDM-024-M108","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Metal_Frame_in_Brushed_Brass.jpg?v=1789239652"},{"product_id":"demisting-mirror-with-a-shaver-socket-in-brushed-brass","title":"Demisting Mirror with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a dual voltage shaver socket built into the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130300798,"sku":"BBM-LDM-027-M68","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023130333566,"sku":"BBM-LDM-027-M88","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023130366334,"sku":"BBM-LDM-027-M108","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Demisting_Mirror_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239657"},{"product_id":"full-height-demisting-mirror-in-brushed-brass","title":"Full Height Demisting Mirror in Brushed Brass","description":"\u003cp\u003eA demisting mirror, front lit: a 1600mm mirror lit down both edges, for a bathroom where the mirror is the wall.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall, which is thin enough not to catch a shoulder at a basin\u003c\/li\u003e\n\u003cli\u003eLight output: 1250 lumens at 84 lumens per circuit watt, giving 300 lux at the face from 400mm, which is the figure to compare and the one nobody publishes\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white as standard\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable on the mirror itself, from 10 to 100 per cent, with no flicker at the bottom of the range\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, hard wired to a fused spur behind the mirror. A 100mm access hole is needed in the tiling and the template shows where\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 36.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eDemister pad: covers 80 per cent of the glass area, 60 watts per square metre, switched with the light and clear in about four minutes. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036, with a polished and sealed edge\u003c\/li\u003e\n\u003cli\u003eLit panels: sandblasted rather than printed, so the light is even down the whole panel instead of banded\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets and a levelling screw, one person to fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ethe wall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea paper drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstallation instructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The mirror hangs on two brackets with a levelling screw, so one person can fit it and adjust it afterwards. Leave the access hole where the template shows, because reaching a connection block behind a fitted mirror through the wrong hole is a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. That is the whole decision on this page. A front lit mirror puts 300 lux on a face from 400mm with the light coming from each side at eye height, which fills the shadows under the brow and the chin. A backlit mirror puts perhaps 40 lux on a face and all of it bounced. Buy backlit for the look and add a light above the basin, or buy front lit and be done.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023130988926,"sku":"BBM-LDM-030-M68","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023131021694,"sku":"BBM-LDM-030-M88","price":2724.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023131054462,"sku":"BBM-LDM-030-M108","price":3224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Full_Height_Demisting_Mirror_in_Brushed_Brass.jpg?v=1789239741"},{"product_id":"ip44-rated-glass-pendant-for-over-a-bath-in-brushed-brass","title":"IP44 Rated Glass Pendant for Over a Bath in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a hand blown glass pendant that is actually rated for zone 1, which almost no decorative pendant is, using a sealed lamp holder and a gasketed ceiling rose.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023141900670,"sku":"BBM-PEN-002-27","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023141933438,"sku":"BBM-PEN-002-30","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023141966206,"sku":"BBM-PEN-002-40","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Glass_Pendant_for_Over_a_Bath_in_Brushed_Brass.jpg?v=1789239810"},{"product_id":"ip44-rated-crystal-chandelier-for-a-bathroom-in-brushed-brass","title":"IP44 Rated Crystal Chandelier for a Bathroom in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a small chandelier rated for zone 2, with sealed holders and a stainless canopy, for the bathroom that is trying to be a room.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023142326654,"sku":"BBM-PEN-006-27","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023142359422,"sku":"BBM-PEN-006-30","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023142392190,"sku":"BBM-PEN-006-40","price":2499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Crystal_Chandelier_for_a_Bathroom_in_Brushed_Brass.jpg?v=1789239813"},{"product_id":"ip44-rated-opal-globe-pendant-in-brushed-brass","title":"IP44 Rated Opal Globe Pendant in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a 300mm opal globe, which throws light in every direction and is the least glaring thing you can hang over a bath.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023143833982,"sku":"BBM-PEN-014-27","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023143866750,"sku":"BBM-PEN-014-30","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023143899518,"sku":"BBM-PEN-014-40","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Opal_Globe_Pendant_in_Brushed_Brass.jpg?v=1789239800"},{"product_id":"ip44-rated-ribbed-glass-pendant-pair-in-brushed-brass","title":"IP44 Rated Ribbed Glass Pendant Pair in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a matched pair for either side of a mirror, hung at 1600mm to the centre of the glass, which is the height that lights a face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023144718718,"sku":"BBM-PEN-018-27","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023144751486,"sku":"BBM-PEN-018-30","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023144784254,"sku":"BBM-PEN-018-40","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Ribbed_Glass_Pendant_Pair_in_Brushed_Brass.jpg?v=1789239812"},{"product_id":"ip44-rated-brass-lantern-for-a-bathroom-in-brushed-brass","title":"IP44 Rated Brass Lantern for a Bathroom in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a solid brass lantern with a sealed glass, for a period bathroom where a downlight would be wrong.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145177470,"sku":"BBM-PEN-022-27","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145210238,"sku":"BBM-PEN-022-30","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145243006,"sku":"BBM-PEN-022-40","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Brass_Lantern_for_a_Bathroom_in_Brushed_Brass.jpg?v=1789239808"},{"product_id":"ip65-rated-pendant-for-a-wet-room-in-brushed-brass","title":"IP65 Rated Pendant for a Wet Room in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: 316 stainless and a bonded glass, rated for zone 1 in a room that is wet all day.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023145603454,"sku":"BBM-PEN-026-27","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023145636222,"sku":"BBM-PEN-026-30","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023145668990,"sku":"BBM-PEN-026-40","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Rated_Pendant_for_a_Wet_Room_in_Brushed_Brass.jpg?v=1789239861"},{"product_id":"ip44-rated-alabaster-pendant-in-brushed-brass","title":"IP44 Rated Alabaster Pendant in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: hand carved alabaster, sealed against humidity, which is a stone that behaves badly in a bathroom unless it is properly finished and beautifully when it is.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146127742,"sku":"BBM-PEN-030-27","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146160510,"sku":"BBM-PEN-030-30","price":3024.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146193278,"sku":"BBM-PEN-030-40","price":3024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Alabaster_Pendant_in_Brushed_Brass.jpg?v=1789239802"},{"product_id":"ip44-rated-fluted-glass-pendant-trio-in-brushed-brass","title":"IP44 Rated Fluted Glass Pendant Trio in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: three fluted cylinders on a linear rose, for a long room or over a double basin.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023146520958,"sku":"BBM-PEN-034-27","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023146553726,"sku":"BBM-PEN-034-30","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023146586494,"sku":"BBM-PEN-034-40","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Fluted_Glass_Pendant_Trio_in_Brushed_Brass.jpg?v=1789239808"},{"product_id":"ip44-rated-pendant-with-a-fabric-shade-in-brushed-brass","title":"IP44 Rated Pendant with a Fabric Shade in Brushed Brass","description":"\u003cp\u003eA pendant that is actually rated for a bathroom: a moisture resistant fabric shade over a sealed holder, for a bathroom outside the zones where the fitting can be softer.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the drop is adjustable from 300 to 1500mm by shortening the flex at the rose\u003c\/li\u003e\n\u003cli\u003eLight output: taking a 6W E14 or E27 LED lamp, supplied, at 806 lumens and 88 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95, measured, with R9 above 60. R9 is the deep red value and it is the one that decides whether skin looks like skin. Most bathroom fittings quote a CRI in the eighties and do not quote R9 at all, which is how you end up shaving by a light that makes you look ill\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable with the lamp supplied. If you change the lamp, check the replacement is dimmable, because most decorative LED lamps are not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed ceiling rose and a sealed lamp holder. The earth is not optional on a metal bodied fitting\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eWhy this is rare: a decorative pendant is normally IP20 and unlawful in any bathroom zone. This one is gasketed at the rose, at the holder and at the glass, which is why it costs what it costs\u003c\/li\u003e\n\u003cli\u003eMinimum height: 2.25 metres above the floor if it is over a bath, which is the top of zone 1 and where the rules change\u003c\/li\u003e\n\u003cli\u003eLamp: supplied, dimmable, and replaceable without breaking the seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe pendant, assembled\u003c\/li\u003e\n\u003cli\u003ethe gasketed ceiling rose and gaskets\u003c\/li\u003e\n\u003cli\u003ethe LED lamp\u003c\/li\u003e\n\u003cli\u003efixings for a ceiling rose or a joist\u003c\/li\u003e\n\u003cli\u003einstallation instructions with the zone diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The rose is gasketed to the ceiling and the gasket has to sit on a flat, clean surface, so if the ceiling is textured it needs skimming flat under the rose. Set the drop before the final connection, because shortening a flex afterwards means breaking the seal.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eAlmost every decorative pendant sold for a bathroom is IP20 and is therefore not lawful anywhere in zone 1 or zone 2, which is most of a normal bathroom. The retailers rarely say so and the photographs always show them over a bath. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for. Everything on this page is gasketed and rated, and the zone is stated at the top of the specification rather than in a footnote.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023147012478,"sku":"BBM-PEN-038-27","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023147045246,"sku":"BBM-PEN-038-30","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023147078014,"sku":"BBM-PEN-038-40","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Rated_Pendant_with_a_Fabric_Shade_in_Brushed_Brass.jpg?v=1789239803"},{"product_id":"over-mirror-light-bar-at-600mm-in-brushed-brass","title":"Over Mirror Light Bar at 600mm in Brushed Brass","description":"\u003cp\u003eLight at the mirror: a bar above the mirror, which is the second best place to light a face and much better than a ceiling downlight behind you.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158481278,"sku":"BBM-MRB-003-27","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023158514046,"sku":"BBM-MRB-003-30","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023158546814,"sku":"BBM-MRB-003-40","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_Bar_at_600mm_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"pair-of-vertical-mirror-lights-in-brushed-brass","title":"Pair of Vertical Mirror Lights in Brushed Brass","description":"\u003cp\u003eLight at the mirror: two vertical fittings at face height either side of the mirror, which is the best arrangement there is and the one that fills the shadows under the eyes.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1200 lumens at 86 lumens per circuit watt, giving 288 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 288 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159071102,"sku":"BBM-MRB-009-27","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159103870,"sku":"BBM-MRB-009-30","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159136638,"sku":"BBM-MRB-009-40","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pair_of_Vertical_Mirror_Lights_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"over-mirror-light-with-a-shaver-socket-in-brushed-brass","title":"Over Mirror Light with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eLight at the mirror: the bar with an integrated dual voltage shaver socket to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159398782,"sku":"BBM-MRB-012-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159431550,"sku":"BBM-MRB-012-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159464318,"sku":"BBM-MRB-012-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"tunable-over-mirror-light-bar-in-brushed-brass","title":"Tunable Over Mirror Light Bar in Brushed Brass","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159988606,"sku":"BBM-MRB-018-27","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160021374,"sku":"BBM-MRB-018-30","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160054142,"sku":"BBM-MRB-018-40","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Brushed_Brass.jpg?v=1789239874"},{"product_id":"slim-over-mirror-light-at-15mm-deep-in-brushed-brass","title":"Slim Over Mirror Light at 15mm Deep in Brushed Brass","description":"\u003cp\u003eLight at the mirror: 15mm from the wall, for a mirror set close to a tiled recess.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 15mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 800 lumens at 86 lumens per circuit watt, giving 192 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 192 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160578430,"sku":"BBM-MRB-024-27","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160611198,"sku":"BBM-MRB-024-30","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160643966,"sku":"BBM-MRB-024-40","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Slim_Over_Mirror_Light_at_15mm_Deep_in_Brushed_Brass.jpg?v=1789239875"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-brushed-brass","title":"Adjustable Over Mirror Light on a Swing Arm in Brushed Brass","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161201022,"sku":"BBM-MRB-030-27","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161233790,"sku":"BBM-MRB-030-30","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161266558,"sku":"BBM-MRB-030-40","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Brushed_Brass.jpg?v=1789239633"},{"product_id":"over-mirror-light-with-a-downward-baffle-in-brushed-brass","title":"Over Mirror Light with a Downward Baffle in Brushed Brass","description":"\u003cp\u003eLight at the mirror: a baffle that stops the fitting glaring into the eyes of somebody looking up, which is the commonest complaint about an over mirror bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: a downward baffle keeps the source out of direct view\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161725310,"sku":"BBM-MRB-033-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161758078,"sku":"BBM-MRB-033-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161790846,"sku":"BBM-MRB-033-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Downward_Baffle_in_Brushed_Brass.jpg?v=1789239874"},{"product_id":"ip44-bathroom-wall-light-in-brushed-chrome","title":"IP44 Bathroom Wall Light in Brushed Chrome","description":"\u003cp\u003eA wall light for a bathroom: the plain gasketed wall light, for beside a mirror or on the wall opposite it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166181758,"sku":"BBM-WAL-001-27","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166214526,"sku":"BBM-WAL-001-30","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166247294,"sku":"BBM-WAL-001-40","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Bathroom_Wall_Light_in_Brushed_Chrome.jpg?v=1789239751"},{"product_id":"ip44-bathroom-wall-light-in-matt-black","title":"IP44 Bathroom Wall Light in Matt Black","description":"\u003cp\u003eA wall light for a bathroom: the plain gasketed wall light, for beside a mirror or on the wall opposite it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166280062,"sku":"BBM-WAL-002-27","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166312830,"sku":"BBM-WAL-002-30","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166345598,"sku":"BBM-WAL-002-40","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Bathroom_Wall_Light_in_Matt_Black.jpg?v=1789239749"},{"product_id":"ip44-bathroom-wall-light-in-brushed-brass","title":"IP44 Bathroom Wall Light in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: the plain gasketed wall light, for beside a mirror or on the wall opposite it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166378366,"sku":"BBM-WAL-003-27","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166411134,"sku":"BBM-WAL-003-30","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166443902,"sku":"BBM-WAL-003-40","price":104.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Bathroom_Wall_Light_in_Brushed_Brass.jpg?v=1789239745"},{"product_id":"ip44-up-and-down-bathroom-wall-light-in-brushed-chrome","title":"IP44 Up and Down Bathroom Wall Light in Brushed Chrome","description":"\u003cp\u003eA wall light for a bathroom: light in both directions, which washes a wall rather than making a pool.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166607742,"sku":"BBM-WAL-004-27","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166640510,"sku":"BBM-WAL-004-30","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166673278,"sku":"BBM-WAL-004-40","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Up_and_Down_Bathroom_Wall_Light_in_Brushed_Chrome.jpg?v=1789239803"},{"product_id":"ip44-up-and-down-bathroom-wall-light-in-matt-black","title":"IP44 Up and Down Bathroom Wall Light in Matt Black","description":"\u003cp\u003eA wall light for a bathroom: light in both directions, which washes a wall rather than making a pool.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166706046,"sku":"BBM-WAL-005-27","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166738814,"sku":"BBM-WAL-005-30","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166771582,"sku":"BBM-WAL-005-40","price":104.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Up_and_Down_Bathroom_Wall_Light_in_Matt_Black.jpg?v=1789239803"},{"product_id":"ip44-up-and-down-bathroom-wall-light-in-brushed-brass","title":"IP44 Up and Down Bathroom Wall Light in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: light in both directions, which washes a wall rather than making a pool.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166804350,"sku":"BBM-WAL-006-27","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166837118,"sku":"BBM-WAL-006-30","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166869886,"sku":"BBM-WAL-006-40","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Up_and_Down_Bathroom_Wall_Light_in_Brushed_Brass.jpg?v=1789239806"},{"product_id":"ip65-wall-light-for-zone-1-in-brushed-chrome","title":"IP65 Wall Light for Zone 1 in Brushed Chrome","description":"\u003cp\u003eA wall light for a bathroom: rated for directly beside a shower, which most wall lights are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023166902654,"sku":"BBM-WAL-007-27","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023166935422,"sku":"BBM-WAL-007-30","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023166968190,"sku":"BBM-WAL-007-40","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Wall_Light_for_Zone_1_in_Brushed_Chrome.jpg?v=1789239859"},{"product_id":"ip65-wall-light-for-zone-1-in-matt-black","title":"IP65 Wall Light for Zone 1 in Matt Black","description":"\u003cp\u003eA wall light for a bathroom: rated for directly beside a shower, which most wall lights are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023167000958,"sku":"BBM-WAL-008-27","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023167033726,"sku":"BBM-WAL-008-30","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023167066494,"sku":"BBM-WAL-008-40","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Wall_Light_for_Zone_1_in_Matt_Black.jpg?v=1789239863"},{"product_id":"ip65-wall-light-for-zone-1-in-brushed-brass","title":"IP65 Wall Light for Zone 1 in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: rated for directly beside a shower, which most wall lights are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023167099262,"sku":"BBM-WAL-009-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023167132030,"sku":"BBM-WAL-009-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023167164798,"sku":"BBM-WAL-009-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Wall_Light_for_Zone_1_in_Brushed_Brass.jpg?v=1789239872"}],"url":"https:\/\/batheandbeam.com\/collections\/brass.oembed?page=2","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}