{"title":"£150 to £500","description":"\u003cp\u003eIlluminated mirrors, mirror cabinets, pendants and downlight trade packs. The band where the mirror decision gets made — read \u003ca href=\"\/pages\/front-lit-or-backlit\"\u003efront lit or backlit\u003c\/a\u003e before you commit.\u003c\/p\u003e","products":[{"product_id":"marine-grade-ip65-ceiling-light-in-matt-white","title":"Marine Grade IP65 Ceiling Light in Matt White","description":"\u003cp\u003eA surface mounted bathroom light: 316 stainless for a wet room or a coastal house, salt spray tested to 1000 hours.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm diameter by 60mm deep\u003c\/li\u003e\n\u003cli\u003eLight output: 1600 lumens at 88 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eMounting: surface, onto a ceiling rose position or a joist, with a gasketed base plate\u003c\/li\u003e\n\u003cli\u003eDiffuser: opal polycarbonate, UV stable, which does not yellow the way acrylic does over a decade\u003c\/li\u003e\n\u003cli\u003eSensor: none fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed base plate and gasket\u003c\/li\u003e\n\u003cli\u003efixings for a joist and for plasterboard\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, twenty minutes. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The base plate gasket needs a flat clean ceiling under it, so a textured ceiling wants skimming flat under the fitting or the seal does nothing.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA single flush fitting is the right answer for a great many bathrooms and the trade will always try to sell six downlights instead. One 1450 lumen fitting in the middle of a four square metre bathroom, plus a proper light at the mirror, is better lit than six downlights and costs a fifth as much to install. The case for downlights is a large room, a high ceiling, or a design that wants no visible fitting at all. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023157662078,"sku":"BBM-CEI-028-27","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023157694846,"sku":"BBM-CEI-028-30","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023157727614,"sku":"BBM-CEI-028-40","price":159.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_IP65_Ceiling_Light_in_Matt_White.jpg?v=1789239864"},{"product_id":"marine-grade-ip65-ceiling-light-in-brushed-chrome","title":"Marine Grade IP65 Ceiling Light in Brushed Chrome","description":"\u003cp\u003eA surface mounted bathroom light: 316 stainless for a wet room or a coastal house, salt spray tested to 1000 hours.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm diameter by 60mm deep\u003c\/li\u003e\n\u003cli\u003eLight output: 1600 lumens at 88 lumens per circuit watt. Efficacy is quoted in lumens per circuit watt, which counts the driver losses, rather than lumens per chip watt, which does not. Part L of the Building Regulations asks for 75 lumens per circuit watt on new work and a great many fittings sold as compliant are quoted the other way.\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, double insulated, with an integral constant current driver. No earth required and nothing separate to find a home for above the ceiling\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting: surface, onto a ceiling rose position or a joist, with a gasketed base plate\u003c\/li\u003e\n\u003cli\u003eDiffuser: opal polycarbonate, UV stable, which does not yellow the way acrylic does over a decade\u003c\/li\u003e\n\u003cli\u003eSensor: none fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed base plate and gasket\u003c\/li\u003e\n\u003cli\u003efixings for a joist and for plasterboard\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, twenty minutes. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The base plate gasket needs a flat clean ceiling under it, so a textured ceiling wants skimming flat under the fitting or the seal does nothing.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA single flush fitting is the right answer for a great many bathrooms and the trade will always try to sell six downlights instead. One 1450 lumen fitting in the middle of a four square metre bathroom, plus a proper light at the mirror, is better lit than six downlights and costs a fifth as much to install. The case for downlights is a large room, a high ceiling, or a design that wants no visible fitting at all. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023157760382,"sku":"BBM-CEI-029-27","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023157793150,"sku":"BBM-CEI-029-30","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023157825918,"sku":"BBM-CEI-029-40","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_IP65_Ceiling_Light_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"pair-of-vertical-mirror-lights-in-matt-black","title":"Pair of Vertical Mirror Lights in Matt Black","description":"\u003cp\u003eLight at the mirror: two vertical fittings at face height either side of the mirror, which is the best arrangement there is and the one that fills the shadows under the eyes.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1200 lumens at 86 lumens per circuit watt, giving 288 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 288 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023158972798,"sku":"BBM-MRB-008-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159005566,"sku":"BBM-MRB-008-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159038334,"sku":"BBM-MRB-008-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pair_of_Vertical_Mirror_Lights_in_Matt_Black.jpg?v=1789239867"},{"product_id":"pair-of-vertical-mirror-lights-in-brushed-brass","title":"Pair of Vertical Mirror Lights in Brushed Brass","description":"\u003cp\u003eLight at the mirror: two vertical fittings at face height either side of the mirror, which is the best arrangement there is and the one that fills the shadows under the eyes.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1200 lumens at 86 lumens per circuit watt, giving 288 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 288 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159071102,"sku":"BBM-MRB-009-27","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159103870,"sku":"BBM-MRB-009-30","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159136638,"sku":"BBM-MRB-009-40","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Pair_of_Vertical_Mirror_Lights_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"over-mirror-light-with-a-shaver-socket-in-brushed-brass","title":"Over Mirror Light with a Shaver Socket in Brushed Brass","description":"\u003cp\u003eLight at the mirror: the bar with an integrated dual voltage shaver socket to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked, plus BS EN 61558-2-5 for the isolating transformer, which is the standard that makes a shaver socket safe in a bathroom, plus BS EN 60598 for the luminaire where one is fitted\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159398782,"sku":"BBM-MRB-012-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159431550,"sku":"BBM-MRB-012-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159464318,"sku":"BBM-MRB-012-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Shaver_Socket_in_Brushed_Brass.jpg?v=1789239869"},{"product_id":"tunable-over-mirror-light-bar-in-brushed-chrome","title":"Tunable Over Mirror Light Bar in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159791998,"sku":"BBM-MRB-016-27","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159824766,"sku":"BBM-MRB-016-30","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159857534,"sku":"BBM-MRB-016-40","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Brushed_Chrome.jpg?v=1789239876"},{"product_id":"tunable-over-mirror-light-bar-in-matt-black","title":"Tunable Over Mirror Light Bar in Matt Black","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159890302,"sku":"BBM-MRB-017-27","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023159923070,"sku":"BBM-MRB-017-30","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023159955838,"sku":"BBM-MRB-017-40","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Matt_Black.jpg?v=1789239870"},{"product_id":"tunable-over-mirror-light-bar-in-brushed-brass","title":"Tunable Over Mirror Light Bar in Brushed Brass","description":"\u003cp\u003eLight at the mirror: 2700K to 5000K, warm for the evening and daylight for makeup, on a touch control at the end of the bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1000 lumens at 86 lumens per circuit watt, giving 240 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 240 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023159988606,"sku":"BBM-MRB-018-27","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160021374,"sku":"BBM-MRB-018-30","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160054142,"sku":"BBM-MRB-018-40","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Tunable_Over_Mirror_Light_Bar_in_Brushed_Brass.jpg?v=1789239874"},{"product_id":"over-mirror-light-with-a-motion-sensor-in-matt-black","title":"Over Mirror Light with a Motion Sensor in Matt Black","description":"\u003cp\u003eLight at the mirror: a sensor that brings it up as somebody approaches the basin, which sounds like a gimmick and is the thing people say they miss when they move house.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 950 lumens at 86 lumens per circuit watt, giving 228 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 228 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160185214,"sku":"BBM-MRB-020-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160217982,"sku":"BBM-MRB-020-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160250750,"sku":"BBM-MRB-020-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Motion_Sensor_in_Matt_Black.jpg?v=1789239868"},{"product_id":"over-mirror-light-with-an-opal-glass-on-a-brass-bar-in-brushed-chrome","title":"Over Mirror Light with an Opal Glass on a Brass Bar in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: a solid brass bar with a hand blown opal glass, for a bathroom where the fitting is meant to be seen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 850 lumens at 86 lumens per circuit watt, giving 204 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 204 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160709502,"sku":"BBM-MRB-025-27","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160742270,"sku":"BBM-MRB-025-30","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160775038,"sku":"BBM-MRB-025-40","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_an_Opal_Glass_on_a_Brass_Bar_in_Brushed_Chrome.jpg?v=1789239865"},{"product_id":"over-mirror-light-with-an-opal-glass-on-a-brass-bar-in-matt-black","title":"Over Mirror Light with an Opal Glass on a Brass Bar in Matt Black","description":"\u003cp\u003eLight at the mirror: a solid brass bar with a hand blown opal glass, for a bathroom where the fitting is meant to be seen.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 850 lumens at 86 lumens per circuit watt, giving 204 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 204 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023160807806,"sku":"BBM-MRB-026-27","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023160840574,"sku":"BBM-MRB-026-30","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023160873342,"sku":"BBM-MRB-026-40","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_an_Opal_Glass_on_a_Brass_Bar_in_Matt_Black.jpg?v=1789239861"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-brushed-chrome","title":"Adjustable Over Mirror Light on a Swing Arm in Brushed Chrome","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161004414,"sku":"BBM-MRB-028-27","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161037182,"sku":"BBM-MRB-028-30","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161069950,"sku":"BBM-MRB-028-40","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Brushed_Chrome.jpg?v=1789239636"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-matt-black","title":"Adjustable Over Mirror Light on a Swing Arm in Matt Black","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161102718,"sku":"BBM-MRB-029-27","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161135486,"sku":"BBM-MRB-029-30","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161168254,"sku":"BBM-MRB-029-40","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Matt_Black.jpg?v=1789239634"},{"product_id":"adjustable-over-mirror-light-on-a-swing-arm-in-brushed-brass","title":"Adjustable Over Mirror Light on a Swing Arm in Brushed Brass","description":"\u003cp\u003eLight at the mirror: an arm that pulls out and swings, for shaving or for anything that needs the light in front of the face rather than above it.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 700 lumens at 86 lumens per circuit watt, giving 168 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: an opal diffuser, so the source is not a visible line of dots in the mirror\u003c\/li\u003e\n\u003cli\u003eLux at the face: 168 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161201022,"sku":"BBM-MRB-030-27","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161233790,"sku":"BBM-MRB-030-30","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161266558,"sku":"BBM-MRB-030-40","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Adjustable_Over_Mirror_Light_on_a_Swing_Arm_in_Brushed_Brass.jpg?v=1789239633"},{"product_id":"over-mirror-light-with-a-downward-baffle-in-brushed-brass","title":"Over Mirror Light with a Downward Baffle in Brushed Brass","description":"\u003cp\u003eLight at the mirror: a baffle that stops the fitting glaring into the eyes of somebody looking up, which is the commonest complaint about an over mirror bar.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 600mm long by 40mm high by 60mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 900 lumens at 86 lumens per circuit watt, giving 216 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired. Not supplied with a plug, which would not be lawful in a bathroom\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eMounting height: 200mm above the top of the mirror for a bar, or 1600mm to centre for a vertical pair, which is the height that lights a face rather than a forehead\u003c\/li\u003e\n\u003cli\u003eGlare: a downward baffle keeps the source out of direct view\u003c\/li\u003e\n\u003cli\u003eLux at the face: 216 from 400mm, which is the number to compare between fittings and the one almost nobody publishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ea wall bracket and gasket\u003c\/li\u003e\n\u003cli\u003efixings for tile and for plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Get the height right before you drill: 200mm above the mirror for a bar, 1600mm to centre for a vertical pair. Ten centimetres too high and the light lands on a forehead and leaves the eyes in shadow.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eThere are three places to put light at a mirror and they are not equal. Vertical fittings each side at eye height are the best, because they fill the shadows under the brow, the nose and the chin. A bar above the mirror is second and perfectly good. A downlight in the ceiling behind you is the worst, because it puts your own shadow on your face, and it is what most bathrooms have. If you change one thing in a bathroom, change this.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023161725310,"sku":"BBM-MRB-033-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023161758078,"sku":"BBM-MRB-033-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023161790846,"sku":"BBM-MRB-033-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Over_Mirror_Light_with_a_Downward_Baffle_in_Brushed_Brass.jpg?v=1789239874"},{"product_id":"front-lit-illuminated-mirror-in-brushed-chrome","title":"Front Lit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: the plain front lit mirror, with lit panels at face height and no demister.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023161823614,"sku":"BBM-MIR-001-M68","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023161856382,"sku":"BBM-MIR-001-M57","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023161889150,"sku":"BBM-MIR-001-M88","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023161921918,"sku":"BBM-MIR-001-M108","price":359.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239744"},{"product_id":"front-lit-illuminated-mirror-in-matt-black","title":"Front Lit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: the plain front lit mirror, with lit panels at face height and no demister.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023161954686,"sku":"BBM-MIR-002-M68","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023161987454,"sku":"BBM-MIR-002-M57","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162020222,"sku":"BBM-MIR-002-M88","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162052990,"sku":"BBM-MIR-002-M108","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239730"},{"product_id":"backlit-illuminated-mirror-in-brushed-chrome","title":"Backlit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a halo of light behind the glass, which is the one everybody wants from the photographs and which will not light your face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162085758,"sku":"BBM-MIR-003-M68","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162118526,"sku":"BBM-MIR-003-M57","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162151294,"sku":"BBM-MIR-003-M88","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162184062,"sku":"BBM-MIR-003-M108","price":399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239656"},{"product_id":"backlit-illuminated-mirror-in-matt-black","title":"Backlit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a halo of light behind the glass, which is the one everybody wants from the photographs and which will not light your face.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162216830,"sku":"BBM-MIR-004-M68","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162249598,"sku":"BBM-MIR-004-M57","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162282366,"sku":"BBM-MIR-004-M88","price":349.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162315134,"sku":"BBM-MIR-004-M108","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239634"},{"product_id":"backlit-and-front-lit-illuminated-mirror-in-brushed-chrome","title":"Backlit and Front Lit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: both, on two switches, which is the honest way to sell a backlit mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 980 lumens front and 420 lumens behind, on two switches\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front and back on separate switches, so you can have the look and the light\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162347902,"sku":"BBM-MIR-005-M68","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162380670,"sku":"BBM-MIR-005-M57","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162413438,"sku":"BBM-MIR-005-M88","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162446206,"sku":"BBM-MIR-005-M108","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_and_Front_Lit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239656"},{"product_id":"backlit-and-front-lit-illuminated-mirror-in-matt-black","title":"Backlit and Front Lit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: both, on two switches, which is the honest way to sell a backlit mirror.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 980 lumens front and 420 lumens behind, on two switches\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front and back on separate switches, so you can have the look and the light\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162478974,"sku":"BBM-MIR-006-M68","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162511742,"sku":"BBM-MIR-006-M57","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162544510,"sku":"BBM-MIR-006-M88","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162577278,"sku":"BBM-MIR-006-M108","price":529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Backlit_and_Front_Lit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239648"},{"product_id":"round-backlit-illuminated-mirror-in-brushed-chrome","title":"Round Backlit Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a round halo mirror, and the same caveat applies.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162610046,"sku":"BBM-MIR-007-M68","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162642814,"sku":"BBM-MIR-007-M57","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162675582,"sku":"BBM-MIR-007-M88","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162708350,"sku":"BBM-MIR-007-M108","price":419.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Backlit_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239872"},{"product_id":"round-backlit-illuminated-mirror-in-matt-black","title":"Round Backlit Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a round halo mirror, and the same caveat applies.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens behind the glass, giving roughly 40 lux at the face\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: backlit only, which is a room light rather than a face light. A backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above.\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162741118,"sku":"BBM-MIR-008-M68","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162773886,"sku":"BBM-MIR-008-M57","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162806654,"sku":"BBM-MIR-008-M88","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162839422,"sku":"BBM-MIR-008-M108","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Round_Backlit_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239865"},{"product_id":"front-lit-illuminated-mirror-with-a-demister-in-brushed-chrome","title":"Front Lit Illuminated Mirror with a Demister in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: front lighting plus a heated pad covering 80 per cent of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: 80 per cent coverage, switched with the light. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023162872190,"sku":"BBM-MIR-009-M68","price":399.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023162904958,"sku":"BBM-MIR-009-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023162937726,"sku":"BBM-MIR-009-M88","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023162970494,"sku":"BBM-MIR-009-M108","price":569.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_with_a_Demister_in_Brushed_Chrome.jpg?v=1789239745"},{"product_id":"front-lit-illuminated-mirror-with-a-demister-in-matt-black","title":"Front Lit Illuminated Mirror with a Demister in Matt Black","description":"\u003cp\u003eAn illuminated mirror: front lighting plus a heated pad covering 80 per cent of the glass.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: 80 per cent coverage, switched with the light. The demister is a heated pad laminated to the back of the glass. It clears an area the size of the pad and no more, which is why the pad size is stated below rather than just the word demister. A pad that covers a third of a mirror will clear a third of a mirror.\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163003262,"sku":"BBM-MIR-010-M68","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163036030,"sku":"BBM-MIR-010-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163068798,"sku":"BBM-MIR-010-M88","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163101566,"sku":"BBM-MIR-010-M108","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Front_Lit_Illuminated_Mirror_with_a_Demister_in_Matt_Black.jpg?v=1789239745"},{"product_id":"illuminated-mirror-with-a-touch-dimmer-in-matt-black","title":"Illuminated Mirror with a Touch Dimmer in Matt Black","description":"\u003cp\u003eAn illuminated mirror: touch dimming from 10 to 100 per cent with no flicker at the bottom, which most touch dimmers cannot manage.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163265406,"sku":"BBM-MIR-012-M68","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163298174,"sku":"BBM-MIR-012-M57","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163330942,"sku":"BBM-MIR-012-M88","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163363710,"sku":"BBM-MIR-012-M108","price":449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Touch_Dimmer_in_Matt_Black.jpg?v=1789239746"},{"product_id":"small-illuminated-mirror-for-a-cloakroom-in-brushed-chrome","title":"Small Illuminated Mirror for a Cloakroom in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a 400 by 600mm mirror for a cloakroom, where the whole room is smaller than most mirrors are wide.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163396478,"sku":"BBM-MIR-013-M68","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163429246,"sku":"BBM-MIR-013-M57","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163462014,"sku":"BBM-MIR-013-M88","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163494782,"sku":"BBM-MIR-013-M108","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Small_Illuminated_Mirror_for_a_Cloakroom_in_Brushed_Chrome.jpg?v=1789239875"},{"product_id":"small-illuminated-mirror-for-a-cloakroom-in-matt-black","title":"Small Illuminated Mirror for a Cloakroom in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a 400 by 600mm mirror for a cloakroom, where the whole room is smaller than most mirrors are wide.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163560318,"sku":"BBM-MIR-014-M68","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163593086,"sku":"BBM-MIR-014-M57","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163625854,"sku":"BBM-MIR-014-M88","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163658622,"sku":"BBM-MIR-014-M108","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Small_Illuminated_Mirror_for_a_Cloakroom_in_Matt_Black.jpg?v=1789239875"},{"product_id":"arched-illuminated-mirror-in-brushed-chrome","title":"Arched Illuminated Mirror in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: an arched top with the lighting following the curve, which is harder to make evenly lit than it looks.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163691390,"sku":"BBM-MIR-015-M68","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163724158,"sku":"BBM-MIR-015-M57","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163756926,"sku":"BBM-MIR-015-M88","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163789694,"sku":"BBM-MIR-015-M108","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Arched_Illuminated_Mirror_in_Brushed_Chrome.jpg?v=1789239652"},{"product_id":"arched-illuminated-mirror-in-matt-black","title":"Arched Illuminated Mirror in Matt Black","description":"\u003cp\u003eAn illuminated mirror: an arched top with the lighting following the curve, which is harder to make evenly lit than it looks.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163822462,"sku":"BBM-MIR-016-M68","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163855230,"sku":"BBM-MIR-016-M57","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023163887998,"sku":"BBM-MIR-016-M88","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023163920766,"sku":"BBM-MIR-016-M108","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Arched_Illuminated_Mirror_in_Matt_Black.jpg?v=1789239652"},{"product_id":"illuminated-mirror-with-a-magnifying-insert-in-brushed-chrome","title":"Illuminated Mirror with a Magnifying Insert in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a five times magnifying circle set into the glass and lit separately.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023163953534,"sku":"BBM-MIR-017-M68","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023163986302,"sku":"BBM-MIR-017-M57","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164019070,"sku":"BBM-MIR-017-M88","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164051838,"sku":"BBM-MIR-017-M108","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Magnifying_Insert_in_Brushed_Chrome.jpg?v=1789239734"},{"product_id":"illuminated-mirror-with-a-metal-frame-in-brushed-chrome","title":"Illuminated Mirror with a Metal Frame in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a 12mm metal frame, which is the detail that stops a lit mirror looking like a monitor.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164215678,"sku":"BBM-MIR-019-M68","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164248446,"sku":"BBM-MIR-019-M57","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164281214,"sku":"BBM-MIR-019-M88","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164313982,"sku":"BBM-MIR-019-M108","price":659.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Metal_Frame_in_Brushed_Chrome.jpg?v=1789239744"},{"product_id":"illuminated-mirror-with-a-metal-frame-in-matt-black","title":"Illuminated Mirror with a Metal Frame in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a 12mm metal frame, which is the detail that stops a lit mirror looking like a monitor.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164346750,"sku":"BBM-MIR-020-M68","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164379518,"sku":"BBM-MIR-020-M57","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164412286,"sku":"BBM-MIR-020-M88","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164445054,"sku":"BBM-MIR-020-M108","price":679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Metal_Frame_in_Matt_Black.jpg?v=1789239737"},{"product_id":"illuminated-mirror-with-a-shaver-socket-in-brushed-chrome","title":"Illuminated Mirror with a Shaver Socket in Brushed Chrome","description":"\u003cp\u003eAn illuminated mirror: a dual voltage shaver socket in the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164477822,"sku":"BBM-MIR-021-M68","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164510590,"sku":"BBM-MIR-021-M57","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164543358,"sku":"BBM-MIR-021-M88","price":439.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164576126,"sku":"BBM-MIR-021-M108","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Shaver_Socket_in_Brushed_Chrome.jpg?v=1789239742"},{"product_id":"illuminated-mirror-with-a-shaver-socket-in-matt-black","title":"Illuminated Mirror with a Shaver Socket in Matt Black","description":"\u003cp\u003eAn illuminated mirror: a dual voltage shaver socket in the frame to BS EN 61558-2-5.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: chosen above. Depth 42mm from the wall\u003c\/li\u003e\n\u003cli\u003eLight output: 1150 lumens at the front, giving 280 lux at the face from 400mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K neutral white, which is the right temperature at a mirror\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: touch dimmable from 10 to 100 per cent\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2, hard wired to a fused spur behind the mirror\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598-2-1, BS EN 1036 for the silvered glass, and BS EN 12150 for the toughened substrate. Every mirror is safety backed so it holds together if it is broken\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eLighting position: front lit at face height, which lights a face properly\u003c\/li\u003e\n\u003cli\u003eDemister: not fitted on this model\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm silvered float, safety backed to BS EN 1036\u003c\/li\u003e\n\u003cli\u003eMounting: two brackets with a levelling screw, one person\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe mirror\u003c\/li\u003e\n\u003cli\u003ewall brackets and levelling screws\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003ethe connection block and gland\u003c\/li\u003e\n\u003cli\u003einstructions and a cleaning card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician for the spur. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Leave the access hole where the template shows, because a connection block behind a fitted mirror reached through the wrong hole becomes a tiling job.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA backlit mirror throws its light at the wall behind it and returns a halo. It is beautiful and it does not light your face. If this mirror is the only light source at your basin, choose a front lit one instead, or add a light above. We sell both because plenty of people want the look and are right to, but the specification says which is which and the lux at the face is printed for each. If a backlit mirror is your only light at the basin, add a bar above it or a pair of vertical fittings beside it, and the room will work.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"600 by 800mm","offer_id":58023164608894,"sku":"BBM-MIR-022-M68","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"500 by 700mm","offer_id":58023164641662,"sku":"BBM-MIR-022-M57","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"800 by 800mm","offer_id":58023164674430,"sku":"BBM-MIR-022-M88","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"1000 by 800mm","offer_id":58023164707198,"sku":"BBM-MIR-022-M108","price":529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Illuminated_Mirror_with_a_Shaver_Socket_in_Matt_Black.jpg?v=1789239744"},{"product_id":"ip65-wall-light-for-zone-1-in-brushed-brass","title":"IP65 Wall Light for Zone 1 in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: rated for directly beside a shower, which most wall lights are not.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023167099262,"sku":"BBM-WAL-009-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023167132030,"sku":"BBM-WAL-009-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023167164798,"sku":"BBM-WAL-009-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP65_Wall_Light_for_Zone_1_in_Brushed_Brass.jpg?v=1789239872"},{"product_id":"ip44-wall-light-with-a-ribbed-glass-in-brushed-brass","title":"IP44 Wall Light with a Ribbed Glass in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: a ribbed glass shade that scatters the source, so it can be looked at directly.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: hand blown, so no two are identical, which is the point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023167394174,"sku":"BBM-WAL-012-27","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023167426942,"sku":"BBM-WAL-012-30","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023167459710,"sku":"BBM-WAL-012-40","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Wall_Light_with_a_Ribbed_Glass_in_Brushed_Brass.jpg?v=1789239812"},{"product_id":"ip44-picture-style-wall-light-for-a-mirror-in-brushed-brass","title":"IP44 Picture Style Wall Light for a Mirror in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: a small arm and shade over the top of a mirror, in the manner of a picture light.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023168049534,"sku":"BBM-WAL-018-27","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023168082302,"sku":"BBM-WAL-018-30","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023168115070,"sku":"BBM-WAL-018-40","price":179.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Picture_Style_Wall_Light_for_a_Mirror_in_Brushed_Brass.jpg?v=1789239812"},{"product_id":"ip44-wall-light-on-a-solid-brass-body-in-brushed-chrome","title":"IP44 Wall Light on a Solid Brass Body in Brushed Chrome","description":"\u003cp\u003eA wall light for a bathroom: solid brass with a sealed glass, unlacquered so it patinates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023168147838,"sku":"BBM-WAL-019-27","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023168180606,"sku":"BBM-WAL-019-30","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023168213374,"sku":"BBM-WAL-019-40","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Wall_Light_on_a_Solid_Brass_Body_in_Brushed_Chrome.jpg?v=1789239813"},{"product_id":"ip44-wall-light-on-a-solid-brass-body-in-matt-black","title":"IP44 Wall Light on a Solid Brass Body in Matt Black","description":"\u003cp\u003eA wall light for a bathroom: solid brass with a sealed glass, unlacquered so it patinates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023168246142,"sku":"BBM-WAL-020-27","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023168278910,"sku":"BBM-WAL-020-30","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023168311678,"sku":"BBM-WAL-020-40","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Wall_Light_on_a_Solid_Brass_Body_in_Matt_Black.jpg?v=1789239803"},{"product_id":"ip44-wall-light-on-a-solid-brass-body-in-brushed-brass","title":"IP44 Wall Light on a Solid Brass Body in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: solid brass with a sealed glass, unlacquered so it patinates.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023168344446,"sku":"BBM-WAL-021-27","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023168377214,"sku":"BBM-WAL-021-30","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023168409982,"sku":"BBM-WAL-021-40","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Wall_Light_on_a_Solid_Brass_Body_in_Brushed_Brass.jpg?v=1789239803"},{"product_id":"ip44-wall-light-with-a-reeded-glass-cylinder-in-matt-black","title":"IP44 Wall Light with a Reeded Glass Cylinder in Matt Black","description":"\u003cp\u003eA wall light for a bathroom: a reeded cylinder that reads as a period fitting and is rated as a modern one.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: hand blown, so no two are identical, which is the point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023168541054,"sku":"BBM-WAL-023-27","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023168573822,"sku":"BBM-WAL-023-30","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023168606590,"sku":"BBM-WAL-023-40","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Wall_Light_with_a_Reeded_Glass_Cylinder_in_Matt_Black.jpg?v=1789239807"},{"product_id":"ip44-wall-light-with-a-reeded-glass-cylinder-in-brushed-brass","title":"IP44 Wall Light with a Reeded Glass Cylinder in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: a reeded cylinder that reads as a period fitting and is rated as a modern one.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.1 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: hand blown, so no two are identical, which is the point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023168639358,"sku":"BBM-WAL-024-27","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023168672126,"sku":"BBM-WAL-024-30","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023168704894,"sku":"BBM-WAL-024-40","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Wall_Light_with_a_Reeded_Glass_Cylinder_in_Brushed_Brass.jpg?v=1789239809"},{"product_id":"ip44-linear-wall-light-at-600mm-in-brushed-brass","title":"IP44 Linear Wall Light at 600mm in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: a horizontal linear fitting, for above a mirror or along a recess.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023169229182,"sku":"BBM-WAL-030-27","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023169261950,"sku":"BBM-WAL-030-30","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023169294718,"sku":"BBM-WAL-030-40","price":179.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/IP44_Linear_Wall_Light_at_600mm_in_Brushed_Brass.jpg?v=1789239814"},{"product_id":"marine-grade-ip65-wall-light-in-brushed-chrome","title":"Marine Grade IP65 Wall Light in Brushed Chrome","description":"\u003cp\u003eA wall light for a bathroom: 316 stainless for a wet room or a coastal house.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023169327486,"sku":"BBM-WAL-031-27","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023169360254,"sku":"BBM-WAL-031-30","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023169393022,"sku":"BBM-WAL-031-40","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_IP65_Wall_Light_in_Brushed_Chrome.jpg?v=1789239860"},{"product_id":"marine-grade-ip65-wall-light-in-matt-black","title":"Marine Grade IP65 Wall Light in Matt Black","description":"\u003cp\u003eA wall light for a bathroom: 316 stainless for a wet room or a coastal house.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: a fine texture matt black powder coat over a chromated primer, because black paint straight onto aluminium in a bathroom lifts at the edges within two years\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023169425790,"sku":"BBM-WAL-032-27","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023169458558,"sku":"BBM-WAL-032-30","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023169491326,"sku":"BBM-WAL-032-40","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_IP65_Wall_Light_in_Matt_Black.jpg?v=1789239869"},{"product_id":"marine-grade-ip65-wall-light-in-brushed-brass","title":"Marine Grade IP65 Wall Light in Brushed Brass","description":"\u003cp\u003eA wall light for a bathroom: 316 stainless for a wet room or a coastal house.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zones 1 and 2. Zone 1 is directly above the bath or the shower tray up to 2.25 metres from the floor, and this fitting is rated for it\u003c\/li\u003e\n\u003cli\u003eIP rating: IP65. Dust tight, and protected against low pressure water jets from any direction. This is the rating for zone 1, which is directly above a bath or in a shower\u003c\/li\u003e\n\u003cli\u003eDimensions: varies by model, and the projection from the wall is stated on the drawing in the gallery\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens at 84 lumens per circuit watt\u003c\/li\u003e\n\u003cli\u003eColour temperature: chosen above\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 90, with R9 above 50, which is a good deal better than the eighties that this category usually offers and is enough for everything except colour matching makeup\u003c\/li\u003e\n\u003cli\u003eDimming: mains dimmable, trailing edge\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 1, earthed, with a gasketed back plate. A metal bodied fitting in a bathroom is earthed and that is not negotiable\u003c\/li\u003e\n\u003cli\u003eFire rating: not applicable to a wall or surface mounted fitting\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60598 for luminaires, BS EN 62471 photobiological safety at the exempt group, BS EN 55015 for electromagnetic emissions, UKCA and CE marked\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: five years on the fitting and the LED module, two years on the driver\u003c\/li\u003e\n\u003cli\u003eFinish: unlacquered brushed brass, which will patinate in a bathroom and is meant to. If you want it to stay bright, buy the chrome\u003c\/li\u003e\n\u003cli\u003eHeight: 1600mm to centre if it is beside a mirror, which puts the source at face height and is the reason wall lights beat downlights at a basin\u003c\/li\u003e\n\u003cli\u003eGasket: silicone at the back plate, and the wall under it needs to be flat\u003c\/li\u003e\n\u003cli\u003eGlass: moulded and toughened\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fitting\u003c\/li\u003e\n\u003cli\u003ethe gasketed back plate\u003c\/li\u003e\n\u003cli\u003efixings for tile and plasterboard\u003c\/li\u003e\n\u003cli\u003ea drilling template\u003c\/li\u003e\n\u003cli\u003einstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. The back plate gasket needs a flat clean surface, so on a tiled wall it should sit on whole tiles rather than across a grout line where it can.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eA pair of wall lights at face height either side of a mirror is the best lighting a bathroom can have, and it costs less than the six downlights that usually get fitted instead. The catch is that it has to be decided before the tiling, because two cables at 1600mm on a tiled wall are not a retrofit. The zones come from BS 7671, the IET Wiring Regulations. Zone 0 is inside the bath or shower tray. Zone 1 is above it to 2.25 metres. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a basin tap. Outside those, the regulations impose no IP requirement, though a bathroom is still a bathroom and steam still rises. Every product page here states which zones the fitting is rated for.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"2700K warm white","offer_id":58023169524094,"sku":"BBM-WAL-033-27","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"3000K warm white","offer_id":58023169556862,"sku":"BBM-WAL-033-30","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"4000K neutral white","offer_id":58023169589630,"sku":"BBM-WAL-033-40","price":269.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Marine_Grade_IP65_Wall_Light_in_Brushed_Brass.jpg?v=1789239876"},{"product_id":"extractor-fan-with-a-light-and-a-humidity-sensor-in-matt-white","title":"Extractor Fan with a Light and a Humidity Sensor in Matt White","description":"\u003cp\u003eA fan and a light in one hole: a humidistat that runs the fan when the humidity actually rises rather than when the light goes on, which is both quieter and more effective.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 95 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 95 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: humidity sensed, with an adjustable set point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169687934,"sku":"BBM-FAN-003-X1","price":159.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Humidity_Sensor_in_Matt_White.jpg?v=1789239645"},{"product_id":"extractor-fan-with-a-light-and-a-humidity-sensor-in-brushed-chrome","title":"Extractor Fan with a Light and a Humidity Sensor in Brushed Chrome","description":"\u003cp\u003eA fan and a light in one hole: a humidistat that runs the fan when the humidity actually rises rather than when the light goes on, which is both quieter and more effective.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 95 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: the same triple plate with a directional brush, which hides limescale spotting far better than polished does and is the sensible choice in a hard water area\u003c\/li\u003e\n\u003cli\u003eExtract rate: 95 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 28dB at three metres\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: humidity sensed, with an adjustable set point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169720702,"sku":"BBM-FAN-004-X1","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Extractor_Fan_with_a_Light_and_a_Humidity_Sensor_in_Brushed_Chrome.jpg?v=1789239661"},{"product_id":"quiet-extractor-fan-with-a-light-at-19db-in-matt-white","title":"Quiet Extractor Fan with a Light at 19dB in Matt White","description":"\u003cp\u003eA fan and a light in one hole: 19dB at three metres, which is quiet enough that people stop switching it off, and a fan that runs is worth more than a fan that is powerful.\u003c\/p\u003e\u003cp\u003eBathroom lighting is the one part of a house where getting it wrong is a safety matter rather than a taste matter, and it is sold almost entirely on photographs. Every listing here states the zone the fitting may be installed in, the IP rating with both digits explained, the colour rendering index, the lumen output and the efficacy in lumens per circuit watt. If a fitting is not suitable above a bath we say so on the page you are buying it from. If a mirror is backlit and will not light your face, we say that too.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eZone: zone 2 and outside the zones. Zone 2 is the 600mm band beyond zone 1 and the 600mm radius around a washbasin tap. It is not rated for zone 1, which means not directly over the bath\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44. The first digit, 4, means protected against solid objects over 1mm. The second digit, 4, means protected against splashing water from any direction. It is the minimum for zone 2 and it is not enough for zone 1\u003c\/li\u003e\n\u003cli\u003eDimensions: 125mm cut out, 175mm overall, and a 100mm duct spigot\u003c\/li\u003e\n\u003cli\u003eLight output: 620 lumens from the light at 82 lumens per circuit watt, and 85 cubic metres an hour of extract measured in the installed configuration rather than at the bare motor\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K on the light\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 80, which is the legal minimum for a domestic fitting and is honest for the money. It is fine for a cloakroom and it is not what you want beside a shaving mirror\u003c\/li\u003e\n\u003cli\u003eDimming: the light is mains dimmable, the fan is not\u003c\/li\u003e\n\u003cli\u003eElectrical: Class 2 on the light, Class 2 on the fan, with separate switched live and permanent live so the overrun works. Both fed from a fused spur outside the zones\u003c\/li\u003e\n\u003cli\u003eFire rating: not fire rated. If the ceiling below is a fire compartment, which it is in a flat and in most two storey extensions, this fitting needs a fire hood or a different product\u003c\/li\u003e\n\u003cli\u003eStandards: BS EN 60335-2-80 for the fan, BS EN 60598 for the luminaire, and tested to the extract rate quoted rather than the rate of the bare motor\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGuarantee: three years\u003c\/li\u003e\n\u003cli\u003eFinish: a powder coated matt white that disappears into a ceiling, and the cheapest honest finish we stock\u003c\/li\u003e\n\u003cli\u003eExtract rate: 85 cubic metres an hour, against the 15 litres a second that Part F of the Building Regulations asks of an intermittent bathroom fan. That is 54 cubic metres an hour, so this has headroom\u003c\/li\u003e\n\u003cli\u003eNoise: 19dB at three metres, which is genuinely quiet\u003c\/li\u003e\n\u003cli\u003eDucting: 100mm rigid duct to an outside wall or a tile vent. A fan ducted into a loft void is a fan that rots a roof, and it is more common than anybody admits\u003c\/li\u003e\n\u003cli\u003eOverrun: one to thirty minutes, adjustable on the back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ethe fan and light unit\u003c\/li\u003e\n\u003cli\u003ethe duct spigot and a backdraught shutter\u003c\/li\u003e\n\u003cli\u003ea cut out template\u003c\/li\u003e\n\u003cli\u003ethe wiring diagram and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eA registered electrician, and somebody who will duct it properly. Electrical work in a room containing a bath or a shower is notifiable under Part P of the Building Regulations in England and Wales. That means it has to be done by a registered electrician or signed off by building control. Replacing a like for like fitting on an existing circuit is not notifiable. Adding a new circuit, a new socket or a new spur is. Rigid 100mm duct, the shortest run you can manage, to an outside wall or a tile vent. Every bend costs you extract and flexible duct costs you more than every bend.\u003c\/p\u003e\u003ch3\u003eChoosing between this and the alternatives\u003c\/h3\u003e\u003cp\u003eFan extract rates are quoted two ways and only one of them is honest. The free air rate is what the motor does with no duct attached and it is what goes on the box. The installed rate is what it does through three metres of 100mm duct and a bend, and it is typically 40 per cent lower. Every figure on this page is the installed rate. Part F asks for 15 litres a second, which is 54 cubic metres an hour, and a fan quoted at 90 free air will often not reach it.\u003c\/p\u003e","brand":"Bathe and Beam","offers":[{"title":"One","offer_id":58023169753470,"sku":"BBM-FAN-005-X1","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1527\/9230\/files\/Quiet_Extractor_Fan_with_a_Light_at_19dB_in_Matt_White.jpg?v=1789239865"}],"url":"https:\/\/batheandbeam.com\/collections\/150-to-500-pounds.oembed","provider":"Bathe \u0026 Beam","version":"1.0","type":"link"}